If you had purchased a DVD from another country, you might face the issue that the DVD player cannot read and reveal an error of “Incorrect region code” or “Disc Error”.It is mainly because the DVD possesses the region code, which does copyright protection. Region code is a digital right management technology that directly reveals the movie distributors’ controlling Movie distribution aspects. Moreover, do you think it is possible to remove or bypass the DVD region code? Absolutely, yes. This article will help you unlock the DVD region codes and enjoy all the DVD features. Moreover, is it possible to bypass or remove the DVD region code? Yes, there is! Here, we will show you how to unlock DVD region codes and then play your DVDs freely. However, a guide on how to bypass or remove DVD and blu ray region codes have been mentioned below.
How to Remove Region Codes from Blu Ray Players or DVD?
There are variant procedures by which you can remove or switch the regional codes on DVD players. Blu-ray or DVD region codes could be removed from the player using a simple remote control code or variant removal hacks for unlocking the player. The below methods are proven for working with all the players for watching and playing the region code of Blue-ray or DVD player.
Table of Contents
Five different hacking methods for making your DVD or Blu-Ray player region free:
For making Blu-Ray or DVD player region free, Below are the five different hacking methods:
Hack Method 1: Blu ray region code remover- Blu Ray Region Free
- First of all, switch on the DVD player without a disc.
- Now, you have to wait patiently for the “No Disc” message to appear on the screen.
- Then, click on the “Pause” button of the remote control.
- Put 3,1,4,1,5,9 on the remote control(FF or code coming on the TV).
- After it,click on the 0 button on the remote(here,0=all regions).
- Click on the “Pause” button of the remote.
- Switch off the DVD player and wait for about 1 minute.
- Now, again, switch on the DVD player.
- Congratulations, Now your DVD has to turn out to be region free.
Warning- If the code doesn’t work effectively, then after the blu-ray player reveals the message of “No Disc”, click on the “Stop” button before putting the code.
Hack Method 2 (Region Free DVD): converting blu-ray player to multi-region
- Switch on the DVD player.
- Let the DVD tray open.
- Click on the “info” button of the remote.
- You will see some numbers appearing on the screen.
- Then, you have to click on the nine buttons of the numeric keypad for multi-region.
- You have to press nine until this number appear in the upper left corner.
- Switch off the DVD.
- Switch on the DVD.
- Now, you will see that the DVD has turned out to be region free.
Hack Method 3(Region free DVD): For making blu ray player region free
- Turn off the DVD player but keep in mind that it should be in “Stand by mode”.
- Now you have to click on the “Top Menu” button.
- Afterwards, click on the “Clear” button.
- Again, click on the “Power” button.
- You have to choose option 2.
- You have to select option 4.
- Now, put in the 12450 code and click on the “Enter” button.
- Again, Put in the 00000 code and click on the “Enter” button.
- Turn off the DVD.
- Now, Turn on the DVD.
- You will see that the DVD has turned out to be region free.
Hack Method 4(Region Free DVD): For making Sony, LG, Samsung, Panasonic blu ray player region free.
- Switch on the DVD player with no disc in the tray.
- You will see “No disc” appearing on the DVD screen.
- Click on the “Pause” Button by using the remote control.
- With the help of the remote control, Click on the numeric keys: 3, 1, 4, 1, 5, 9.
- The screen would reveal a prompt box asking for a new code.
- Click on the “0” button for having universal code.
- Again, click on the “Pause” button.
- Furthermore, “No disc” should be visible on the DVD player screen.
- DVD has to turn out to be region free.
Hack Method 5 (Region Free DVD): Panasonic blu ray region free code
- You have to switch on the DVD player without the disk in it.
- Make the proper position of the remote control in front of the DVD or blu ray player.
- Now click on the remote one’s buttons at a time in a specific order: 1 to 9 and 0 respectively.
- After it, the DVD player will automatically reset.
- Finally, the DVD has turned out to be region free.
Removing DVD Region Code by making use of a Professional Free DVD Region Code Remover (How to Bypass DVD Region Codes)
Using a professional DVD region code remover, you could do DVD region code removal and rip the movie content to an extensive format such as AVI and MP4. With its help, directly you could enjoy DVD movies on a laptop without Tablets, DVD drive or cell phones anywhere and anytime.
Changing DVD Drive on Laptop or PC
On PC, click on the “My Computer” icon and do right-click on the DVD drive and choose the “Properties” option. You have to make a selection of the “Select the Hardware tab”.Below “All disk drives”, make a selection of your DVD drive. After it, choose “Properties” and click on the “DVD Region tab”.In the end, Make a selection of which region you wish to change.
Making Use of Open Source & Freeware DVD Players
There are variant open-source software DVD players. Presently, VLC is one of the extensive favourable media players. One of the VLC regions’ unique features is that It ignores region coding, and It would not enforce region coding. It needs access to the raw data of the DVD for decrypting CSS. This access is not accessible on some RPC-2 firmware containing drives while playing a particular region disc which is different from another drive.
Purchasing a Region Free DVD Player
You could purchase a multi-region DVD player or an all-region player. It would allow you to use DVD without any loss of quality. However, While adopting this approach, consider that it is one of the costly practices to adopt.
Step-by-step Guide on How to Remove Region Code from DVD with the Best Region Free DVD Ripper (How to Bypass DVD and Blu Ray Region Codes)
Preparation: In DVD-ROM, Put region 1/2/3/4/5/6 DVD. After it, Open the DVD region decoder.
Step 1: Firstly, you have to choose the “DVD Disc” button. You could select a DVD letter from various drives consisting of optical drives. At the interface’s bottom.,do preset of an O/P folder for the particular video the DVD would be converted to. In the end, Press on the “OK” button for initiating analysis of the DVD.
Step 2: The resultant format is adjusted to MPG. You could easily constraint the quality of the O/P movie by fetching the quality controlling bar or customizing audio or video parameters.
Step 3: Finally, choose the “Run” option for initiating the procedure of ripping. This process may take some time of a few minutes before a 10GB size DVD turned out to be compressed and ripped. You would find the O/P video in the preset folder.
Removing DVD Region Code by ripping (How to Bypass DVD and Blu Ray Region Codes)
With VideoSolo DVD Ripper, you could easily remove the DVD region code with the help of ripping the DVD to another format. In short, you do DVD digitalization. The obtained DVD video would possess no limitation of region code. VideoSolo DVD Ripper is one of the best utility companies that will be ripping and removing DVD region code up to 300 formats. Besides it, you will achieve the best possible quality. Moreover, a guide on How to Remove or Bypass DVD and Blu Ray Region Codes is mentioned below.
Steps:
Loading the DVD which you wish to Remove Region Code (How to Bypass DVD and Blu Ray Region Codes)
Download, install and launch VideoSolo DVD Ripper on your computer. And then get your DVDs into the DVD-ROM. When they can be detected by the computer, press “Load DVD” and import the DVD to the program.
For removing the region code:
- Do downloading and installation of VideoSolo DVD Ripper on PC and launch it.
- Put the DVDs into DVD-ROM.
- As PC detect it, click on the “Load DVD” button and do DVD import to the specific program.
In addition, for a guide on How to Bypass or Remove DVD and Blu Ray Region Codes, follow the more steps mentioned below.
Make a selection of an O/P Format for the DVD
, Move on the “Rip All to” and click on the dropdown button and make a selection of O/P format which would best suit the specific device from the appearing list. You could click on the icon of “setting” as an option. You could choose the target format by typing in the search bar.
Initiating Remove DVD Region Code
Finally, click on the “Rip all” to initiate the removal procedure. With efficient speed, the program will be ripped in a short period.
Changing DVD Region in Mac/ Windows Manually?
Both Mac and PC reveal an option to change the DVD region code and obtain the matching code with DVD. Otherwise, You would get an “incorrect region” error while playing DVD. Follow the below steps for changing the region code:
How to change DVD drive region code in Mac
On Mac, the DVD region code would set automatically as the DVD player on. If the region code of inserted DVD is not matching with the DVD drive, It would ask about changing the region code.
Steps:
- On your MacBook Pro, put the DVD into the optical drive. A prompt up box would ask to choose a DVD drive region.
- Have a consultation with the DVD package to verify the region code to utilize. For example, Region 6 is the code for China.
- From the Dropdown menu, choose “Change Drive Region to” and then select the region code.
- Choose “Set Drive Region”.
- Press the “Lock” icon for saving the customized settings.
Changing DVD drive region code in Windows (10)
- From the file explorer, choose a DVD drive.
- Do right click and switch to the “Properties” option on the DVD drive.
- Choose the Hardware tab and make a selection of DVD drive. In the device Properties panel, click on the “Properties” button.
- Choose the “DVD region” Tab and make a selection of geographic area and press the “OK” button.
Change the region code for DVD S/W.
For avoiding the error and DVD region code setting to another region code, below is the mechanism for changing the DVD drive region code.
- From the start menu, go to the “Control Panel” icon.
- The various icons appearing in the Contol Panel choose the “System and Maintenance” option and Press on the “Device Manager” icon.
- Choose and double Press the CDROM/DVD drive icon from the appearing choices.
- You have to choose the “DVD region” Tab from the window of device properties.
- In the DVD region window’s pop-up box, select the appropriate region code.
- Press the OK button.
Important:
- You can choose a region code for a maximum of 4 attempts.
- If there is a requirement for a new region code, The CDROM/DVD require replacing.
Copying and ripping the regional DVDs is the appropriate method for avoiding the DVD drive resetting and enjoying foreign region-coded DVDs in a limitless manner. Moreover, WinX DVD Ripper is the right free tool for having region free DVD.
Converting DVD to region free:
WinX DVD Ripper unlocks the regional DVDs and puts them into a convertible form. However, it does decryption of Region-code Enhanced (RCE), regional-playback control & variant region locks.
Change DVD region codes:
It would convert all the regions to the “0” area as a region code changer. As a result, you would receive a region free output file, and you can easily playback it without concerns of regions.
Convert regional DVDs:
WinX DVD Ripper could convert encrypted region DVDs to AVI, H.264, MP4, HEVC, WMV, MPEG, MOV, etc. Being converted, the owner of the DVD could transfer or convert the regional movies to a memory stick, USB flash drive, hard drive, MicroSD Memory Card. With it, You can play the videos of DVD on iPad, Andriod, WP8 and iPhone.
Conclusion: (How to Bypass or Remove DVD and Blu Ray Region Codes)
By following the above steps, you can easily remove or bypass the DVD region code and enjoy all DVD or Blu-ray features. Besides it, you have other options, such as converting the regional code and change the DVD region code with the help of various ripper software.
Read More:
- Panasonic Blu Ray Remote Codes
- RCA Universal Remote DVD Player Codes
- Program Universal Remote To DVD Player
- Panasonic DVD Remote Control Codes
- OPPO Blu-Ray Universal Remote Control Codes and Setup Guide
- How to program an Blackweb Universal Remote