Fixed: Samsung TV Won’t Connect To WiFi

A major selling point of Samsung TVs is their easy WiFi connection and high-quality screens. Occasionally, the Wi-Fi connection can be refused. So that you do not have a bad experience, we want to help you fix this.

samsung tv not connecting to wifi? What can you do? Plug your TV back in after about one minute of unplugging it from the wall. Once the TV is turned on, plug it back into the wall. Change the connection type of your 5.0 GHz and 2.4 GHz wireless connections and give each a unique name. Setting up your TV’s network settings can be done using the IP settings from your phone. Turn your TV off and on again:

  1. Turn on your television.
  2. The Samsung logo appears once the power button is pressed and held.

Or

  1. Your Samsung TV should now be on.
  2. Then, plug out the power cable after the television has run for about five minutes.
  3. Then turn the TV back on after waiting 20 minutes.

WiFi connectivity problems on Samsung TVs can be caused by several factors. You can fix it step-by-step with this article, which includes step-by-step instructions.

Also read: How to Pair ONN Headphones with an Android or iPhone Quickly?

Why Won’t My Samsung TV Not Connecting To WiFi?

Samsung TV Won’t Connect To WiFi
Wi-Fi connection issues on Samsung TV can be caused by a number of things. Here are a few common ones:

Incompatible Firmware:  

A TV’s firmware that hasn’t been updated in a couple of months is probably outdated. It won’t work properly if it doesn’t have the latest firmware update. Your TV settings might also be incorrect. Additionally, outdated firmware can be dangerous for your device.

Bugs in general: 

Using the remote control to turn off the Samsung TV for longer than 10 to 15 minutes results in the network settings being corrupted. Additionally, your device could be susceptible to general bugs due to a number of technical reasons.

Address block for Mac: 

Samsung TVs use specific addresses for stable connections to the router, just like other devices. If an ISP or user chooses to block an address, the device will not connect to the router. If this occurs, your Samsung TV might not be able to connect to WiFi.

Also read: Samsung Remote Not Working

Configure DNS: 

When you attempt to connect to Wi-Fi via your television and your router, a conflict may arise because the DNS settings are incorrect. Manually changing settings can lead to this problem if the users make a mistake.

Modem or router issue:  

A malfunctioning WiFi router may prevent your smart TV from connecting to WiFi at any time.

Password incorrect: 

The wrong password is often typed by many people. Due to the on-screen TV keyboard’s difficulty, users often experience this.

Also read: How to program DirecTV Remote to Samsung Smart TV

What Can I Do If My Samsung TV Won’t Connect To WiFi?

Samsung TV Won’t Connect To WiFiAfter knowing the reasons why your Samsung TV won’t connect to WiFi, it may be possible to fix it. You may need to follow specific steps depending on what is causing the issue. Now let’s take a look at how to connect samsung tv to wifi using just a few simple steps.

  1. Restart your Samsung TV

This is the most convenient method most of the time. You can use it to fix temporary problems that prevent your TV from working normally. There are two ways to do it.

The first option is:

  1. The Samsung TV should be turned on.
  2. The Samsung remote should have a Power button.
  3. The Samsung logo will appear on the screen once you keep pressing this button.
  4. After the TV has been restarted, its red LED will begin to blink more quickly.
  5. As soon as the TV is turned on, reconnect it to the WiFi network.

The second option should be tried if you still cannot connect your TV to WiFi. Below is what you need to do:

  1. Turn your Samsung TV on.
  2. Remove the power cable after about 5-10 minutes, then turn the TV off using the remote control.
  3. Turn the TV back on after waiting roughly 30 minutes.

Taking the next step is necessary if the problem persists.

Also read: How to Update and Manage Apps On Samsung TV?

2. Unplug your TV

There are many people who have found this solution useful. It is simple, yet effective. After unplugging your TV for about a minute, re-plug it into the wall. Turn on the TV as usual with the remote control. The TV will be reset and the WiFi problem should be resolved.

3. Use a wireless connection operating at 5.0 GHz

Changing the name of your WiFi spot is the first step. The solution to this Samsung TV WiFi issue is easy to try, and it has worked previously for some people.

After you turn on your TV, connect to the 5.0 GHz wireless connection, search for WiFi configuration, and name both the 2.4 and 5.0 wireless connections differently so that your TV is not confused. There are fewer interferences with the 5.0 wireless connection.

Please use the 2.4 GHz wireless connection instead of the 5.0 GHz one if you were previously using the 5.0 GHz one.

Also read: How to Fix Not Working Vizio Remote?

4. Use your phone’s IP settings

Follow these steps to do so:

  1. Turn on the television.
  2. Within the Internet Configuration Menu, you need to enter the Wi-Fi password.
  3. You will be prompted to change the TV’s Network/IP settings if it won’t connect.
  4. Select Manual IP and DNS Configuration in IP Settings.
  5. The information should be the same as on your smartphone that is connected to the same wireless network.
  6. For your phone, select WiFi Settings > Manage Network Settings > Show Advanced Options > IP Settings > Change to “Static”.
  7. The network information that appears can be captured in a screenshot.
  8. You will need to enter this information in the Network Settings of your TV.
  9. Then click OK.

Also read: How to Program Genie Remote Control?

5. Enter the IP address and DNS server information

Setting up your DNS server is as follows:

  1. Click Settings > General > Network > Status of the network.
  2. The network test should be cancelled.
  3. Go to IP Settings.
  4. Choose Enter Manually from DNS Settings.
  5. Select Done after entering 8.8.8.8.

Tip: Try manually typing 208.67.222.222 instead of the public DNS address if that works.

6. Ensure your WiFi password is correct

If the problem persists, try re-entering your WiFi password. Here’s what to do:

  1. On your remote, press the Home button to begin.
  2.  To open the network settings, go to Settings > General > Network > Open Network Settings > Wireless.
  3.  Your wireless network password must be correct. In the event that you haven’t done so, enable Show password to verify that you’ve entered the correct one.

Despite the correct password, a problem may persist due to a settings or configuration issue.

Tip: Try changing the WiFi password on your router to see if that helps.

Also read: How to Program a Firestick Remote

7. Make sure your network settings aren’t blocking your TV

Follow the steps below to reset your TV’s network settings:

  1. The Home button is located on the remote control.
  2. To access the network settings, navigate to the Settings > General > Network menu.
  3. Reset the network by clicking Reset.
  4. If yes, select it.
  5. Reset the network settings by restarting the television.

8. Disable Anynet+

Turning off this feature of Samsung TV can cause many issues, including those that affect WiFi.

  1. Your TV remote should have a Home button.
  2. Navigate to Settings > General.
  3. The External Device Manager will appear.
  4. You can turn on/off Anynet+ (HDMI-CEC) on your remote control by pressing Enter.

9. Changing the time/date settings

It is just a matter of changing the date and time manually and seeing if that works. Uncheck Set automatically > Set your local time and date manually under Settings > General > System Manager > Date and Time. Make sure that your TV does not automatically set the date and time.

10. Install the latest software

At one point, it was unable to connect to the WiFi, so it couldn’t update the software over the internet. To fix the problem, it is simple to update the software.

  1. Select Support from the Settings menu.
  2. Select the Software Update option.
  3. Turn on Highlight Auto Update by selecting it.

Also read: Philips tv remote not working?

11. Check for strong signals

To determine whether your internet connection is unstable or your samsung smart tv keeps losing internet connection, you should:

  1. Open Network Settings > Wireless by clicking Settings > General > Network. 
  2. Make sure the bars are straight. The internet is too weak or unstable if there are only one or two bars, or if the signal keeps fluctuating.
  3. Use a WiFi repeater to improve your WiFi signal if your router is placed behind many walls.

12. Make use of Ethernet cables

Samsung TV Won’t Connect To WiFiTo make sure your TV is directly connected to the router, let’s use an Ethernet cable. You may have a defective router if this works, so it may be an issue with it.

13. The network source should be restarted

When the problem arises from the router or hotspot, restarting the network source may resolve it.

  1. You need to unplug the power cable from the WiFi router.
  2. Turn the device back on after waiting approximately 10 minutes.
  3. Once the router has loaded internet settings, wait for five minutes.
  4. Open Network Settings > Wireless by going to Settings > General > Network.
  5. Choose a WiFi network.

14. Reset your Smart Hub

Your Samsung TV might not be able to access the Internet due to WiFi issues if you re-set your Smart Hub. To do so, simply follow these steps:

  1. Your remote control should display the Home button.
  2. You can perform a self-diagnosis by going to Settings > Support > Device Care > Self Diagnosis.
  3. The Smart Hub will be reset when you click Reset.
  4. You’ll need to enter your TV’s PIN (default is 0000).
  5. Follow the instructions onscreen.

Also read: Samsung TV Black Screen of Death

15. Reset your television to factory settings

The software and settings configuration issues can be fixed by doing this. Make sure your firmware is current before opting for it. Your TV should automatically install the latest firmware version if it is set up to do so.

The steps below will guide you through the process of factory resetting your Samsung TV.

  1. To access the Settings > General menu, click the gear icon.
  2. Reset the system.
  3. You will need to enter your PIN to start the process. 0000 is the default PIN if it has never been changed.

16. Replacing the WiFi module

Samsung televisions are sometimes plagued by a failure of the ‘NAND-IC’ chip. Faulty WiFi modules can also cause problems. It is possible to replace your WiFi module if you are willing to go the extra mile.

  1. Disconnect the power source from your TV.
  2. Your TV’s back needs to be unscrewed.
  3. In some TVs, there are two covers that must be removed.
  4. In most cases, the WiFi module is located under the plastic cover in the corner.
  5. You can find the location of your WiFi module in your TV’s manual.
  6. Using the screwdriver, remove the WiFi module cable and remove the screw.
  7. Connect the replacement module to the cable using the screw and the replacement module.
  8. The TV’s back cover should be reinstalled.
  9. After replacing the WiFi module, update the firmware on your TV.Samsung TV Won’t Connect To WiFi

17. Consult a professional

After trying every option, the only thing left for you to do is talk to your local electrician or Samsung Support and see if they can provide a viable solution for you.

Also read: How to reset harmony hub

18. Purchase a streamer

It is an extra expense, but you would rather avoid your WiFi problem than fix it. There is no point in buying new parts for your Samsung TV or buying a new TV altogether when you can get a streaming stick like the Amazon Firestick, Chromecast or Roku for much less. Smart TVs are known for being less intelligent than streaming sticks.

Summing Up

Your Samsung TV not connecting to WiFi unless it receives a strong Wi-Fi signal. The transmission of these signals can be affected by several factors, but that should not scare you since this article includes the tips you need to fix it.