Ready to Connect when Network Quality Improves: Multiple Solutions 2022

My older Samsung Galaxy phone’s Wi-Fi connection has been dropping quite often for the past few days. Furthermore, this post will provide solutions to the “Ready to connect when network quality improves.” problem.

My phone is primarily used for calls, but I keep it connected to my Wi-Fi when I need to use the internet or keep it updated.

The Wi-Fi would remain connected for a while, then change to “Ready to connect when network quality improves.

As soon as I tried to update my phone, the download failed because I was disconnected.

I needed my phone to be on a reliable connection as soon as possible.

I searched my phone’s support pages and some user forums to find out how others handled my issue.

My guide is the result of my research and should help you if you ever encounter this issue.

 

The “Ready to Connect when Network Quality Improves” issue occurs when the phone believes the network it is trying to connect to does not have a strong enough signal. Restart your phone, but restart your router if that doesn’t fix it.

 

How do I fix the “Ready to Connect when Network Quality Improves” Error?

When connected or attempting to connect to a Wi-Fi network, you may run into this “Ready to Connect when Network Quality Improves” specific error.

In the Notification bar or in your settings, you’ll see the error message when you check your Wi-Fi connection status.

Occasionally, the status will alternate between Connected and this error message, resulting in frequent disconnects.

 

What causes the “Ready to Connect when Network Quality Improves” error?

When your phone thinks the Wi-Fi network you are trying to connect to has a poor internet connection, it displays the “Ready to Connect when Network Quality Improves” error.

Until the phone thinks the Wi-Fi network has been fixed, it won’t connect to the network.

This does not mean that the signal strength issue is not genuine, and the phone can sometimes be right.

There is a possibility that the phone misdiagnoses the issue.

Your phone won’t connect to your network, and if it does, the connection will drop frequently.

 

Try forgetting your network and reconnecting it.

To fix the “Ready to Connect when Network Quality Improves” issue, you need to forget the Wi-Fi network and reconnect to it again.

All information related to the Wi-Fi network will be deleted if you forget the network.

To reconnect, you would need to discover the network again and enter the password.

Forgetting a Wi-Fi network:

  1. Firstly, go to the Settings app.
  2. Then, hold down the Wi-Fi network you are having trouble with.
  3. Select Forget network from the drop-down menu.

After that, your phone will automatically disconnect from the Wi-Fi network.

Try connecting to the Wi-Fi network again by entering the password.

 

Try restarting your Wi-Fi router.

Try power cycling your router if forgetting the network didn’t work.

A power cycle is just like a reboot, but you completely shut down the device before turning it back on.

Unplug the router from its wall outlet and turn it off.

Plug the router back in and turn it on after waiting 3 to 5 minutes.

If all the lights on the router come back on, try connecting your phone to the Wi-Fi network again.

 

Try restarting your Smartphone.

If your phone still cannot connect to your Wi-Fi router, your phone may be having issues.

Try restarting your phone to resolve the “Ready to Connect when Network Quality Improves” issue.

Press and hold the power button on the side of the phone.

You should see a menu with power options to turn the phone off or restart it.

If there is a restart option, select it.

Choose the power off button if there isn’t one, and let the phone turn off completely.

Press and hold the power button for a few seconds to turn the phone back on.

If the issue persists, connect the phone to the Wi-Fi network when it restarts.

 

Switch the Wi-Fi channel.

Since Wi-Fi is a radio wave-based connection, it uses different channels to connect, receive, and send data over the network.

Each frequency band has its own optimal channels.

You can increase the reliability of your Wi-Fi connection by setting your router to connect only to these channels.

Change your Wi-Fi network channels as follows:

  1. Type 192.168.1.1 in the address bar of your browser.
  2. Use your login credentials to access the router admin tool.
  3. Click on the Wireless tab.
  4. With a dual-band or tri-band router, you will need to set each channel separately.
  • For 2.4GHz, the best channels are 1, 6, and 11.
  • It depends on how many devices are connected to your network at 5GHz. If you have a lot of users, but only one router, use 80Mhz, but if you have multiple routers and many devices, use 40Mhz
  • Finally, save the settings.

 

Change to the 5GHz band.

Multiple channels enable multiple devices to connect to a dual-band or tri-band router.

By logging in to the router’s admin tools, you can change what channel the router is on.

To change the Wi-Fi channel:

  1. Launch a web browser.
  2. Enter 192.168.1.1 in the address bar.
  3. Enter your login credentials to access the admin page.
  4. Look for the wireless settings. Some routers have this setting in the Advanced tab, so make sure you check there too.
  5. The current band can be changed to any of the other bands. However, could you not set it to Auto?
  6. Save the changes and log out of the admin page.
  7. Restart your router.

Connect your phone after the router has been restarted to see if the issue returns.

 

Use a Wi-Fi repeater to solve the “Ready to Connect when Network Quality Improves” problem.

The “Ready to Connect when Network Quality Improves” issue can also be caused by a genuinely weak signal, but getting a strong signal is pretty easy.

Install a Wi-Fi repeater near the area you are having trouble connecting to.

TP-Link AC1200 routers are frequently on sale on Amazon, and they work well with most routers.

Set up a repeater for your Wi-Fi network and reconnect your phone to the network.

Make sure the problem does not return once the repeater is in place.

 

What do you do if you encounter “Ready to Connect when Network Quality Improves” error on a public Wi-Fi network?

If you’re having trouble connecting to a public Wi-Fi hotspot, the options for troubleshooting narrow down because you can’t access the admin tools on a public network.

You would need to log in to a webpage in order to connect to public Wi-Fi.

Make sure the details you enter on that page are accurate and represent your phone correctly.

There will be a mismatch between what you enter and what the network sees if you enter incorrect data.

As you cannot access any admin settings of public hotspots, there is nothing else that you can try.

You should go to the nearest hotspot if one doesn’t work for you.

There are usually online maps that let you locate a hotspot near you, so finding a new hotspot is not as difficult as it used to be.

 

Final Thoughts

If you cannot connect your phone to Wi-Fi, you can try connecting a phone with its SIM deactivated to the Wi-Fi network and see if you can replicate the problem.

If you are experiencing issues connecting to Wi-Fi, you might not be able to start a Wi-Fi hotspot yourself, but only if the problem is with your phone and not your router.

You may want to turn on the hotspot feature to confirm that the problem is with your phone and not the router.

 

Ready to Connect when Network Quality Improves: Frequently Asked Questions

 

What is the best way to fix bad network settings?

By restarting your router, you can fix a badly configured network.

If the problem persists, you can reset your router.

 

What can I do to stop my network from changing?

You can stop your Android phone from frequently changing networks by turning off Auto Network Switching.

 

What is the best way to check the quality of your Wi-Fi network?

The quality of your Wi-Fi network cannot be determined by regular speed tests.

Run an internet quality test from Fusion Connect to do a more thorough test.

 

What is the process for resetting my network adapter?

You can reset the network adapter on your Windows 10 computer by following these steps:

  1. Launch the Settings app.
  2. Select Network & Internet > Status.
  3. Select Reset network settings under Advanced network settings.
  4. Follow the prompts.
  5. Wait for the reset to complete.

 

 

You Might Also Enjoy Reading:

Leave a Reply

Your email address will not be published.