Changfeng TV Universal Remote Codes and Setup Guide

Table of Contents

Changfeng TV Remote: Key Features

Easy to use
100% Good Quality
Durable For More time
Agile and Compatible

Changfeng TV remotes are equipped with an innovative keyboard remote controller to be used on and compatible with Sony TV. For Sony TV, the Changfeng TV remote has zero effort to programming, and it’s set up. There are well-located navigation keys to help guide the menu and direct channel access with regards to TV. Moreover, to program Changfeng TV Universal use Remote Control Codes.

With a further distance of transmission, the Changfeng TV remotes offer stable performance. This is a perfect universal (replacement) remote control. Consequently, it also covers almost every feature and action of your original remote, if it may have been a Sony TV remote.

Changfeng TV Universal Remote Codes and Setup Guide

Changfeng TV Remote Codes

How to Program Changfeng Universal Remote Codes on One For All Universal Remote

The Changfeng TV remote is compatible with OneForAll Smart Control, Evolve, and Essence arrangement programming. Surprisingly, even the OneForAll URC7980 Smart Control 8 universal remote makes use of Changfeng universal remote codes.

How to Program Changfeng TV Universal Remote: Steps

The Direct code method.

Step 1: Firmly press on the “POWER” key such that the LED of the present gadget blinks, two-times. The LED beneath the current mode key blinks, affirming that you have completed this step correctly.

Step 2: Select your device: press the “Gadgets”/”MODE” key consistently until the LED for the gadget you need to set up is lit. However, in the case of, say, for single gadget controllers like Evolve TV, you are free to skip this progression.
Step 3: Enter a four-digit code exclusive for your remote or gadget. On correct programming with the Changfeng universal remote codes, the LED will squint twice. Consequently, it will blank out, indicating that an appropriate remote code has been entered and we have successfully learned how to program Changfeng universal remote.
Step 4: Now point the universal remote towards your gadget and press the ‘POWER’ key. If the device blinks, you have successfully prepared your universal to be utilized. However, we must remember that a few among the many Changfeng TV universal remote codes are very competitive and comparative.

Also Read Google WIFI vs Nest WIFI Which Mesh Router is Best for you?

If you may seem to have found that, at a certain one out of the many Changfeng remote codes keys do not function, then redo the method with the following code, which we shall provide below.

SimpleSet Code Search for Changfeng Universal Remote Codes

SimpleSet is a quick and straightforward method of setting up the universal remote to control every gadget type’s most famous brands with a couple of functions, generally in less than a moment for each gadget. The initial step is to choose which device you will set up.

How to Program Changfeng TV Remote: Manual Method

Like Changfeng remotes, some One For All Universal Remotes boasts a fundamental manual pursuit technique that permits you to discover the code for your gadget by looking over all the prearranged codes in your universal remote.

Step 1: The first step towards programming your Changfeng TV Universal remote would be to ‘PRESS’ and hold upon the ‘MAGIC’ key for 3 seconds until the LED light turns and remains on.

Step 2: Subsequently, select the comparing gadget (for example, TV).
Step 3: Now, press and enter Changfeng TV Universal remote codes. The LED will flicker twice (followed by blinking twice).
Step 4: Next, press ‘POWER.’

Step 5: Press “CH+” again and again, repeatedly, until your gadget turns OFF. You may need to press these keys commonly (up to multiple times) so if it’s not too much trouble, show restraint.
Step 6: As soon as your gadget stops, press the ‘MAGIC’ key to store the Changfeng TV universal remote code. You should now have the option to switch your device back ON and control it effectively.

How to Program Changfeng Universal Remote: Learning

You can take any function from some other working remote onto any key aside from ‘MAGIC’ and ‘POWER.’ To learn, first ensure you have your singular remote controller nearby and that it has working batteries. To know the different capacities, the first remote must be mandated to be around 3cm from the universal tv remote, pointing towards it.

Step 1: The first step instructs us to press on the ‘MAGIC’ key to get the LED beneath the gadget flickering twice. The LED beneath the current key function shall stay lit. That indicates that your Changfeng TV Universal Remote is in Learning Mode.
Step 2: Now, with the help of the ‘DEVICE’/ ‘MODE’ key, ensure that the LED for the gadget you need to learn onto your universal remote works and is kept being switched on, consequentially.

Step 3: Enter a code from the many Changfeng universal remote codes. The LED will flicker twice.
Step 4: Press and enter the key (the function of that particular device) that you need to become familiar with on your universal tv remote. You can commence this step by pressing and holding on to the key on the original remote. Once you do the above step, the LED will squint twice to help indicate that the key gets adopted accurately. Repeat the above-mentioned steps for each key that you must need to learn.
Step 5: While you are programming all the functions that you require, kindly press and hold the ‘MAGIC’ key until the LED flickers twice and turns off for good.

Also Read Radio Shack Universal Remote control codes and Programming

How to Program Changfeng TV Universal Remote: Summary

On the off chance that the LEDs show one long flicker when performing the instructions as per Step 6, the remote could not read the Changfeng TV universal codes and thus could not successfully read the code. So now what to do?

Suppose it is not too much trouble, attempt again from Step 4. If you find that at least one key doesn’t function appropriately after set up, you can likewise bring in the ‘LEARNING MODE’ whenever you wish by following Step 1 mentioned above.

How to Program Changfeng TV Universal Remote: Erase a Learnt Function

To do this, you will first of all need to press on the ‘MAGIC” key until the LED beneath the gadget squints twice. The LED beneath the current mode key will remain lit. Secondly, using the ‘ DEVICE’ / ‘MODE’ key ensures that the LED for the gadget you need to erase capacities from is turned on.
Thirdly, press and enter the universal remote code, particularly for this function. On entering the remote code successfully, the LED will flicker twice.

Step four is to press the option to erase twice. With this, the LED will flicker twice.
Rehash the above technique for each key which you need to erase.

How to Program Changfeng TV Universal Remote: Volume Lock

Suppose you generally utilize one gadget to control Volume, for instance, your TV or an AV Receiver. In that case, you can easily set up your Universal Remote to consistently prevent that gadget, paying little mind to which gadget your remote controls. To do this, follow the steps below.

Step 1: Hold down the ‘MAGIC’ key until the LED of the gadget flashes consecutively. Do notice that the LED beneath the present mode button shall continue blinking.
Step 2: Consequently, enter the Universal remote code ‘993’ and watch that the LED will blink twice.

Step 3: Then, go to and use the ‘GADGETS’/’MODE’ key to choose the device you need to lock the Volume.
Step 4: Now, press the ‘MAGIC’ key once. As you do this, the LED will squint twice, and there you go! The Volume is locked now.

Also Read Amazon Fire TV Replacement - Control TV via Amazon Remote Control

How to Program Changfeng TV Universal Remote: Remove Volume Lock

Just in case that there is one specific gadget you might want to bar from the Volume Lock (and control its Volume), you can do this, following the instructions below lined herewith.

Step 1: Firstly, hold down the ‘MAGIC’ key to get the LED beneath the device, blinking consecutively. The LED beneath the present button shall continue to be lit.
Step 2: Press 993. The LED will squint twice.

Step 3: Use the ‘Gadgets’/MODE” key to choose the device you desire to eliminate from Volume Lock mode.
Step 4: Finally, press ‘VOLUME DOWN’ – the LED will flicker multiple times, and the gadget is currently eliminated.

To open the Volume and set each device back to controlling its Volume, the method is:

Step 1: Firstly, hold down the ‘MAGIC’ button to get the LED beneath the gadget blinking consecutively. The LED beneath the current mode key shall continue to be lit.
Step 2: Then, press 993, the unique remote code for this function. Now, the LED will flicker twice.

Step 3: Finally, press ‘VOLUME UP’– the LED will flash multiple times, and the volume option, ready to be altered.

Changfeng TV Universal Remote Codes: 4 digit codes

0264

0753
0471
0412

1521
0721