Vidao Universal Remote Control Codes

Vidao remote control codes can handle multiple devices simultaneously. Firstly, you have to do the proper setting of the codes for the vidao remote to have this comfort, and these vidao tv universal remote codes will be used to program your device as well. Furthermore, you can do it by following one of the methods discussed below. Moreover, vidao universal remote codes for various devices are mentioned below.

 

program Vidao Tv remote codes

 

 

Manual Code Search:

The various steps for a manual search of vidao remote codes are explained below. If you don’t have a particular remote code to control your devices’ operations, you must try these steps to find the remote codes for vidao.

  1. Firstly, Switch on the particular appliance you want to program with remote codes for vidao. For example, various vidao devices are DVD, TV, VCR, etc.
  2. Now, you have to click on the particular Device button(DVD, TV, VCR) for the appliance that you want to manage with vidao remote codes.
  3. Afterward, click on the SET button and hold it for a few seconds till the indicator light start blinking. Let out the SET button. The search programming mode initiates to have the codes for remote.
  4. Then, place the remote at a proper position in front of the appliance. After it, hold and release the CH+ button. As a result, this remote command will switch off your device.
  5. Thus, repeat step 4 if the device is not switched off yet.
  6. Now again, switch on the device with the remote’s help and check the working of vidao tv codes using various functions on the remote such as play, pause, etc.
  7. However, repeat step 5 if all the main functions of the remote are not working. Try to find another code from the same category. 
  8. Lastly, use the “SET” button to save the appropriate codes for vidao remote for your chosen device.

 

Automatic code search programming:

 

  1. Firstly, Switch on the particular appliance you want to program with remote codes for vidao. For example, various vidao devices are DVD, TV, VCR, etc.
  2. Then, you have to click on the particular Device button (DVD, TV, VCR) for the appliance that you want to manage with vidao remote codes. The power button’s indicator light will blink for one time.
  3. Afterward, click on the SET button and hold it for a few seconds till the indicator light start blinking. Let out the SET button. The search programming mode initiates to have the codes for vidao remote. However, If the Light will not blink in the indicator, it means you have to come out of the programming mode.
  4. Then, position the remote at the appliance’s remote sensor. After it, click and release the Power button. The power button’s indicator light will blink once, and then it will start lighting. It means that in Automatic Code Search, programming mode initiates.
  5. However, the significant difference you would see in this automatic mode is that the remote will automatically send a vidao remote code that would switch off your particular appliance every 2 seconds.
  6. Moreover, after your appliance switches off, instantly click on the set button for saving the appropriate remote codes for vidao in the remote memory. As a result, the Light of the indicator will not blink.
  7. Now again, switch on the device with the remote’s help and check the working of vidao tv codes using various functions on the remote such as play, pause, etc.
  8. Finally, repeat steps from 1 to 6 if all the remote’s primary functions are not working. Try to find another vidao remote code from the same category to program your device.

 

Code retrieval:

When you have completed the remote’s programming for controlling various appliances, then save the particular remote codes for vidao for future works.

  • If you are taking help from the manual code search method, search that particular vidao code that you put and make proper note of them.
  • However, if you are using any programming method, you have to retrieve the four-digit code for the particular device you are performing these operations.

Retrieving the four-digit codes automatically programmed

  1. If you want to obtain the four-digit code for the vidao TV remote codes, then make sure to follow these three steps as revealed below:
  2. Firstly, click on the Device button(DVD, TV, VCR) and make a selection of devices on which you want to perform all the remote operations with the help of codes for universal remote. As a result, the Light of the indicator will start blinking.
  3. Now, Click and hold the buttons “INPUT” & “SET” simultaneously. Then, let out both buttons as the Light of the indicator starts blinking.
  4. As a result, the indicator light will reveal the particular digit of the four-digit code by counting the number of times it blinks. Afterward, The Light will stop blinking for 1 second to separate each digit from one another. For instance:
  • The Light of the indicator blink two times (then stops blinking for 1 second)
  • The Light of the indicator blink one time (then stops blinking for 1 second)
  • The Light of the indicator blink seven times (then stops blinking for 1 second)
  • The Light of the indicator blink three times (then stops blinking for 1 second)

 

As a result, the obtained four-digit vidao remote code is 2173 that will handle all the operations remotely. Indeed, various devices that can be operated with vidao code are discussed below:

 

Device

Remote code

TV

1004, 1012, 1084, 1052,1011,1086

SAT

0512,0511

DVD

2000, 2126,2027, 2240,2173

 

VCR

3052, 3117,3055,3169

HDTV

1030, 1133,1132, 1191, 1208,1134

 

AUX

922

AUDIO (Amplifier)

6034

CABLE

0468 , 0470, 0469, 0502 ,0471, 0524

 

Conclusion:

Using these procedures and codes for the vidao universal remote, you can easily control the main components such as TV, DVD, CD, cable, DVR, VCR in a remote manner with the help of one remote. The steps mentioned above will also help you in programming the particular remote vidao code if you don’t have any remote code in your appliance’s manual.

 

Read More:

Leave a Reply

Your email address will not be published. Required fields are marked *