The Akira TV Remote Control is one of the most efficient and effective LED remote controls to work with. It is used with an app, which is simple to set up and quite user-friendly as well. The remote-control app only runs on those smartphones of devices that come with an IR blaster, and the app is specifically for the Akira TV only.
A remote that brings tons of ease and comfort along with the opportunity for users to control their devices, Akira Universal TV Remote control, is perfect. Using different remotes for different devices can get quite annoying with the recharging of batteries and other issues. The remote control for Akira TV helps get rid of these troubles and provides a solution by using a single source of power.
Akira as a brand is well renowned and quite reputable. The customers seem to be quite satisfied with this brand. Moreover, the customer service is quite friendly and is available to cater to all your issues easily.
Table of Contents
Remote control codes for Akira Universal TV
Four-digit Akira Universal TV Remote codes
- 2457
- 0753
- 4426
- 0037
- 3480
- 3494
- 2241
- 2530
- 2333
- 4155
- 1878
- 0418
- 0445
Three-digit Remote codes for Akira Universal TV
- 211
- 611
- 350
- 381
- 384
Programming and setup Instructions for Akira TV Universal Remote codes
The Akira TV setup guide of the remote is quite simple as the instructions are quite detailed. For setting up the Akira TV Universal remote control, there are three simple steps to follow. The following methods for programming are listed below.
Option 1: Programming the Akira TV Universal Remote by using the Auto-Search Method
In this auto search method, the different remote codes for Akira Universal TV go through the scanning process. One principle is scanned at a time to get to the correct small code. Follow the instructions to program your Akira TV remote control with the auto search method.
Step 1: The first step is to switch on the smart device that you want to use. In this case, it is the TV.
Step 2: Now, turn on the remote and tap on the device button you want to use; TV, DVD, CBL, and OK/SEL, for about three seconds. An LED light on the remote will indicate when the device is ready to program.
Step 3: Point the remote towards the device and click on the CH+ and CH- buttons. The remote will show on and off signals. Then, press the up and down key continuously until the device turns itself off automatically.
Step 4: Make sure to verify the code by pressing the power button. The device will turn itself on. Once it starts, try switching and changing the channels to ensure that the remote has been programmed correctly.
Step 5: Press the device button on the remote and save the code. The LED of the device will blink twice to confirm the code has been stored.
Option 2: Programming the Akira TV Universal Remote by using the Manual Method
Using the key code will help program your remote control for Akira TV. Therefore, by using the key code, you can easily program the universal remote. The key code also identifies the make and the model of the devices in use.
Step 1: Firstly, you need to switch the device on
Step 2: Now press the TV button on the Akira TV Universal Remote
Step 3: Next, press and hold the setup button of the Akira TV universal remote until you see the light flashing. The flashing light indicates that the remote has gone into learning mode.
Step 4: Enter the key code provided in the programming guide or the instructions booklet.
Step 5: After completing this procedure, point your remote towards the TV and press and hold the power button.
Step 6: Finally, you can release the power button as soon as the screen switches off
After completing these steps, the device will start working perfectly. In case the device does not work properly, you can program and set up the Akira TV remote control again with the same procedure just by using a different code from the above-listed principles.
Option 3: Programming the Akira TV Universal Remote using the code search method
If you cannot find the key code, which works properly with your device, you can easily set up your Akira TV universal remote control using the search mode method. You can find this code in the manual, which forces the remote to go into search mode after that.
Step 1: Firstly, turn the device on
Step 2: Now press and hold the setup button on the Akira TV universal remote
Step 3: Enter the 9-9-1 three-digit code.
Step 4: Hold the power button on the remote and press the channel up button until the device in question turns off automatically
The Akira TV setup guide and this programming method using the code search method is a little long and takes an extra bit of time. Once you have done all these things and done the above procedure, your remote is now ready to be used.
How to use Akira TV Remote control
Setting up the Akira TV remote control is easy and doesn’t take time. Just open the cover of the small and insert the AAA size batteries. When you insert the batteries, make sure you check the polarities + or – marks on the batteries inside the battery slot.
To prevent any battery damage or leakage:
- Ensure you install all the batteries correctly as per the marking on the remote control for Akira TV.
- Do not accidentally mix up the batteries.
- Remove the batteries when the small is not in use for a long time because it helps preserve the batteries for a longer duration.
Troubleshooting Akira Universal Remote control
Various problems can occur with remotes because they are machines, and machines can get damaged or spoilt at the end of the day. The situations listed below are the common ones that users face. The following troubleshooting steps can help fix the problem at home.
- The remote does not operate with your device.
Firstly make sure that the batteries are fresh and are installed properly on the remote. Now point the remote directly at the device. Also, make sure that there are no obstructions or interruptions between the small and the device that is being used. Also, make sure that you select the right machine on the remote that you want to control. Otherwise, try programming the remote by using a different code. For this, see the direct code entry section. If nothing works, then the small will not be compatible with your device.
- The remote does not provide some of the features on your device.
Sometimes a particular code does not provide few features. During such an instance, try programming the remote with a different code from the hidden codes list. If the small cannot provide all the parts of your device or button, the names may differ from the other original remotes.
FREQUENTLY ASKED QUESTIONS (FAQS)
How do I program my universal remote?
There are two ways to program your Akira TV Universal Remote. Either you can locate the code from the remote codes list, which comes with your remote. Or you can visit their website and ask the customer service for the step-by-step programming information. Mostly, the instruction manual that comes with the remote provides all the codes of the device. The automatic search method is also easy, and all remotes are equipped with this feature.
How do I run a channel scan?
Periodical scanning is great for knowing which channels are working on your TV at all times. The process of scanning channels is easy. You have to select the menu button on your remote and access the settings. Then choose the options of scanning, auto scanning, auto-tuning, and sit back because your TV will handle the rest.
The Akira remote has ABCD buttons. What are they for?
These buttons perform various commands when used, and it depends on the particular device that is being controlled. Read the instructions manual for getting the required information.
Will I need to reprogram my remote on changing the batteries?
The answer to this is no. You do not have to reprogram the remote because it comes with a built-in code saver that stores all the programmed codes in your TV for up to 10 minutes, which is a lot of time to change the batteries.
I cannot get my menu to appear. What should I do?
The remote might have gone into shift mode. Just press and release the setup button and then use the menu button while the red light is blinking. If this doesn’t work, try reprogramming the remote with a different code on the list.
FINAL THOUGHTS
The Akira Universal TV remote control is extremely easy to use and comes with tons of functionality. It is a great device to control all the other devices in your home. The remote comes with an instruction manual, which provides detailed information about how to use the remote.
