It’s like comparing pineapples and grapes when comparing a Ring Chime Pro vs WIFI extender. Although they fall within the six classifications of fruits, they are not the same. How are they different?
The Ring Chime Pro vs WIFI extender, both perform their respective tasks in different ways, with one being more streamlined than the other. Ring Chime Pro is specifically for Ring devices, while WIFI extenders are for all, although in limited capacities.
Ring Chime Pros are available in two generations, and we will compare the 2nd generation for Ring Chime Pro vs WIFI extender comparison. The comparison of ring Chime Pro vs WIFI extender isn’t fair since many of them are extremely expensive, run on the higher 802.11ax standard, or fall into other categories. Therefore, the best WIFI extenders to compare it to are the TP-Link AC1750, Rock Space AC1200, and Netgear Nighthawk X4.
Ring Chime Pro vs WIFI Extender: the main differences
The Ring Chime Pro is a repeater, as are the three comparison extenders. It is true that all of them “extend” the WIFI signal, but only by repeating the signal received from the router. The Netgear Nighthawk also boosts the WIFI signal.
Except for the Nighthawk, repeaters do not amplify or extend the signal. Instead, they take what is already there and distribute it to dead zones throughout your home.
In addition, the Ring Chime Pro is limited to Ring devices only, and that limitation is also limited. Despite the fact that the Ring Chime Pro is dual-band, there are currently only three Ring devices that support the 5GHz band:
- First, Ring Doorbell 3 Plus
- Second, Ring Doorbell 3
- Third, Ring Doorbell Pro
Additionally, the Ring Chime Pro only works with cameras and doorbells. There will be no other Ring devices except the Ring Base Station at 2.4GHz.
All smart home devices, including Ring, will work with WIFI extenders. There is, however, a practical limit of 32 devices for WIFI extenders,
while Ring can support more.
TP-Link AC1750 WIFI Extender vs Ring Chime Pro
Comparing TP-Link AC1750 WIFI extender vs Ring Chime Pro, both are similar in price, but they look different. The TP extender has the disadvantage of consuming the entire power outlet. In comparison between TP-Link AC1750 WIFI extender vs Ring Chime Pro, the Ring Chime Pro measures 4.06 inches x 2.72 inches, while the TP-Link measures 6.4 inches long and 3.5 inches wide.
There are three antennas on the TP-Link, including two foldable ones on either side and a retractable one on top, like a trident sticking out of a hard-shell mesh frame. The Ring Chime Pro has a gray center and soft mesh lateral edges that vibrate in white. In addition, the Ring Chime Pro has a nightlight.
Although the night light is low-key, it provides a bright enough light to prevent you from tripping over your shoes without making your pupils contract. The Ring Chime Pro has a better appearance than the TP-Link AC1200.
Comparing Ring Chime Pro vs TP-Link WIFI extender, both are similar in functionality. Both feature dual bands and the same networking standards. Both extend your WIFI range by 2,000 square feet.
Installation and setup
TP-Link AC1750 WIFI extender vs Ring Chime Pro, both requires a different setup process. WPS is used by TP-Link. Setup is as simple as pressing the WPS button on your router, then pressing the same button on the TP.
When the connection is established, the TP extender will turn solid blue once it has been connected. This process should not take more than a few minutes.
There is an alternative method if your router does not support WPS. Connect your TP-Link extender to your router via Ethernet cable, then use your computer to visit
http://tplinkrepeater.net/. Adding your extender is done through the Ring app. The Ring Chime Pro is set up via the Ring app. The Ring app allows you to scan a code on the back of the device. Once scanned, simply plug the Chime Pro in, and you’re done.
Pros and Cons of TP-Link AC1750 WIFI Extender vs Ring Chime Pro
In comparing the TP-Link AC1750 WIFI extender vs Ring Chime Pro, there are a few pros and cons to consider:
Rock Space AC1200 WIFI Extender vs Ring Chime Pro
Rock Space AC1200 costs $44.59, making it an affordable alternative to Ring Chime Pro. In addition to two lateral antennas, a black plastic body, and dimensions of 3 x 2.5 x 2.5 inches, the Rock Space is an inch shorter and slightly narrower than the Ring Chime Pro.
For a convenient access point, the bottom of the unit has a gigabit Ethernet port. Even though it looks like the square-faced batman from The Lego Batman Movie, the Rock Space AC1200 has a slick look, despite the unusual wave pattern across the front panel.
In comparison Rock Space AC1200 WIFI extender vs Ring Chime Pro, it looks completely different, and its features are somewhat limited. Its average effective range is 1,292 square feet. The Ring Chime Pro is 2,000 square feet. Additionally, the router offers dual-band 2.4GHz and 5GHz at lower speeds of 300Mbps and 867Mbps.
However, the Rock Space AC1200 is compatible with nearly every operating system, including macOS and Android, and iOS. The Rock Space AC1200 is also compatible with most smart home devices, including Ring.
Installation and setup
The Rock Space features WPS––WIFI Protected Setup––for easy linking with a WPS-enabled router, like the TP-Link AC1750. When the Rock Space extender has finished powering up, press the WPS button on the router, then the WPS button on the Rock Space.
Connect the Rock Space to your router via ethernet cable if your router does not have WPS and navigate to
re.rockspace.local with your browser. You can then add the Rock Space WIFI extender to your network.
Rock Space AC1200 also has LED indicators that tell you if you’ve placed the device too far away from your router. When the LED indicator is blue, your signal is strong. A red LED, or no indicator means you need to move it for better reception.
Pros and cons of the Rock Space AC1200 WIFI Extender vs Ring Chime Pro
In summary, here are the pros and cons of the Rock Space AC1200:
Netgear Nighthawk X4 AC2200 WIFI Extender vs Ring Chime Pro
You can watch 4K movies on multiple devices, play a graphics-intensive video game, and stream Apple Music or Pandora while on a video call with the Netgear Nighthawk X4.
You’ll pay for it, too, at triple the price of the Ring Chime Pro. The TP-Link AC1750 measures 6.3 x 3.2 x 1.7 inches and does not have a pass-through. Nighthawk is squared off, has a mesh lateral side, and is all white, whereas the TP-Link is round.
Netgear’s Nighthawk X4 supports MU-MIMO–multiple users, multiple outputs–and can reach data speeds of 450Mbps at 2.4GHz and 1,733Mbps at 5GHz. The beamforming technology is also used. It beams wireless signal directly to the device instead of dispersing it throughout the home. This is possible for multiple devices at once (MU-MIMO), eliminating most interference.
The LED display is like a Christmas tree of lights for power, WPS, user-link, and client-link with all of these features. A gigabit ethernet access point is connected to a single port on the bottom. On the left side are buttons for power, WPS, and reset.
Installation and setup
WPS is supported by the Netgear Nighthawk X4 AC2200. Press the WPS button on the side of the panel, then the WPS button on your router.
If your router does not have WPS, you will need to plug the Nighthawk into your router’s ethernet port. After you have done that, you can access the Nighthawk at
http://mywifiext.net and add it to your network.
This site also allows you to access Netgear Nighthawk X4 settings, change WIFI passwords, and name and organize your 2.4GHz and 5.0GHz bands.
Pros and Cons of the Netgear Nighthawk X4 AC2200WIFI Extender vs Ring Chime Pro
Ring Chime Pro is More Than a WIFI Extender.
When comparing Ring Chime Pro vs WIFI Extender, the WIFI extenders have obvious and distinct advantages over the Ring Chime Pro when it comes to extending your home network. As an integral part of Ring’s doorbell and camera network, the Chime Pro excels at precisely what Ring intended it for. Besides being a doorbell chime, the Chime Pro has additional features.
Installed with the rest of your Ring network, the Ring Chime Pro chimes along with your Ring doorbell, alerting you even if you are far from the door.
The second generation of Ring Chime Pros completely dispenses with the cheap, plastic design in favor of a modern design that is far more appealing. Additionally, the night light feature sets it apart from other WIFI extenders. Additionally, Ring upgraded from 2.4GHz to dual-band, bringing it in line with most common WIFI extenders.
The customers most likely to buy a Ring Chime Pro are those who own Ring products. As the Ring Chime Pro is only compatible with Ring products, it makes sense as an addition to a Ring smart home/security setup. The current generation of Ring doorbells and cameras will undoubtedly continue to upgrade to dual bands, making the Ring Chime Pro more effective and useful.
Alexa and the Ring Chime Pro
The second-generation Ring Chime Pro was rumored to have Alexa support before its launch. Even though this didn’t work out (except for the 3rd generation), there are still ways to use Alexa and Ring Chime Pro together.
There’s no guarantee that someone will ring your doorbell because they are at your front door. The Ring Chime Pro alerts you when someone rings the doorbell, but Alexa will alert you if something moves. With a Ring camera or doorbell installed, Alexa not only alerts you if someone is outside, but you can also view it through the Ring app, Echo Show 5, Echo Show 8, or Echo Show 10.
It’s a good combination and can’t be replicated by a WIFI extender. When the doorbell is pressed, Alexa devices also chime, adding additional alerts throughout your home.
Ring Chime Pro Vs WIFI Extender: Benefits
Aside from having a dual-band signal that can be used with all Ring devices, the Ring Chime Pro has a variety of Chime tones in case you want to change things up.
To change the settings on a WIFI extender, it is necessary to log in to the router’s website via a laptop or desktop. The Ring app has a more user-friendly interface, allows changes to the Ring Chime Pro’s settings, and is more convenient. It’s also an excellent addition to Amazon’s entire selection of echo devices, recently growing quite large.
As a WIFI extender, it doesn’t take up much space, is easy to set up, and works as expected. Even the light indicators on the front let you know if you’ve placed it too far from the router.
Pros and Cons of the Ring Chime Pro 2nd Generation vs WIFI extender
As a conclusion
The Ring Chime Pro is an excellent addition to an existing Ring security system. As a smart home device, when comparing Ring Chime Pro vs WIFI extender, the Chime Pro is probably not a good investment if you’re looking to extend your connectivity. WIFI extenders can do a lot to optimize your signal and integrate your home network. Alexa and Ring products can also be integrated quite well.
Ring Doorbell owners may assume that Alexa devices can be used as Chime Pros, and a WIFI extender can increase the area where they can be placed. Unless you’re not a fan of Alexa, in which case a Ring Chime Pro makes more sense.
Due to the Chime Pro’s incompatibility with devices outside of the Ring lineup and even some of Ring’s own sensors, along with Ring’s current collection of products that aren’t dual-band, it’s hard to recommend.
The Ring Chime, Pro-especially the second generation-brings some interesting features to the trade and is a quality device, but its limitations keep it below WIFI extenders.
You May Enjoy Reading More: