How To Reset Xfinity Remote? – Setup and Troubleshooting Guide

Xfinity X1 Entertainment platform has been my entertainment platform of choice for a while now. My overall experience with it has been pretty good, except for the times when the remote has unresponsive buttons. The purpose of this article is to give you a guide on how to reset your Xfinity comcast remote control if you need to do so.

The first thing I tried was to replace the batteries, but this proved to be ineffective in many situations as well.

It took me quite a while to research in order to figure out how to fix and reset my Xfinity comcast remote.

As a final step, I was able to find Reset instructions for Xfinity comcast remote, which helped me to take care of my remote effectively. 

Xfinity comcast remotes with a setup button can be reset by pressing it, then entering 9-8-1.

The A and D buttons on the remote need to be held down for a few seconds, then the 9-8-1 button needs to be held down for a few seconds for the Xfinity comcast remote to be reset.


How does resync (reset) and resync (resync) differ on the Xfinity comcast remote control?

The Xfinity remote can be synced with the Xfinity box to provide you with control over the TV with a distance of up to 50 feet.

Also Read  Shenzhen Bilian Electronic Device On My WiFi Network - [GUIDE]

When switching from one Xfinity box to another, the remote must be resynchronized.

It is necessary to pair the remote to the new TV after unplugging the remote from the current TV. 

Pressing the Microphone button or speaking “Program Remote” will pair your Xfinity remote to your TV.

If you wish to pair your TV with your computer, you will have to follow the steps that are shown on the TV screen.

You can also push the A button on the Xfinity remote and use the instructions displayed before you after selecting Remote Settings.

It is conceivable to adjust additional parameters such as volume, contrast, and resolution after the pairing process is complete.

It is important to keep in mind that when you reset your remote you will lose all the settings that you have made until then. In this way, you will be able to feel as if you are holding a brand new remote in your hands as a result.

Xfinity remotes may no longer be recognized by TVs with which they were previously paired. This will result in the pairing process having to be started all over again.


Do you know how and when to reset the Xfinity remote?

In a last resort, you can factory reset the Xfinity Remote if changing the batteries and resetting it haven’t worked as well.

When you reset your remote to factory settings, it will return to the way it was when you purchased remote from the first time from the seller.

In order to use it for the first time, you are going to have to pair and set it up again from scratch. 

Also Read  PS4 Stuck in Safe Mode - Methods To Get It Fixed [2022]

Some Xfinity remotes may not be able to be unpaired from your TV, so you may need to reset them. 

Once your remote has been reset, it will no longer be paired with your TV once it has been reset. In spite of this, there is one catch, which is that if you reset the device. However, you will lose all the settings you have made so far.


How to troubleshoot and reset unresponsive Xfinity comcast remote buttons

You can troubleshoot your Xfinity remote by pressing the buttons on it to see if there is a problem with it.

There are two possible scenarios when a remote button doesn’t respond:

  1. There is no blinking on the LED.
  2. Five red blinks are displayed on the LED.

The batteries in the first case may be defective. Moreover, there is a second indication that they are about to fail.

Replace the battery if either problem persists, and perform a factory reset if the buttons do not work.


Here’s an in-depth guide on How to Factory Reset the Xfinity Comcast Remote with a Setup Button:

You can reset the XR11, XR2, or XR5 remote by doing the following:

  1. After pressing the Setup button for about three to five seconds, you will see a green light on the remote.
  2. When you tap 9-8-1, the LED will flash couple of times in green color, indicating that your Xfinity remote has been reset.


Here’s an in-depth overview on How To Factory Reset the Xfinity Comcast Remote without a Setup Button (XR15)

XR15 remotes without Setup buttons need to be reset using these steps:

  1. Upon pressing and holding the A and D buttons together, a green LED will appear on the remote control.
  2. Your remote is now reset when the LED blinks twice in green color when you press 9-8-1.
Also Read  4 Digit Universal Remote Control Codes for All TVs


Here are some final tips on How To Reset Your Xfinity Comcast Remote to Troubleshoot Issues

To troubleshoot unresponsive buttons on an Xfinity remote, first check the buttons’ cause.

Depending on the cause of the issue, you may have to switch the batteries in the remote and try it again.

In the event that that doesn’t work, you may want to try resetting the remote to see if that helps. Make sure you have the Setup button on your remote before you reset it.

Then, once you have determined the root cause of the problem, you can reset the device accordingly. 

This is a gentle alert to you that you should take caution when resetting your Xfinity remote. Once you reset the device, all your stored data and settings will be lost.

Ensure that alternative measures have been considered and executed prior to turning to the reset procedure.

To avoid late fees, be sure to follow Xfinity Early Termination Procedure if you’ve tried every option and want to see what else is available.



What does the ABCD button on my Xfinity remote mean?

ABCD buttons each perform a unique function. 

  • You can access the Help menu by pressing the A button.
  • Accessibility Settings can be accessed directly by clicking the B button. 
  • When you press the C button in the remote control while watching TV, then it will allow you to view match scores in the Sports application. 
  • DVR recordings can be deleted, scheduled recordings can be canceled. In addition, the Last Watched history can be cleared by pressing D.


Can you tell me how I can unzoom the Xfinity Remote picture in the best way?

To find out what the video output resolution is, go to  Xfinity > Device Settings > Video display > Video Output Resolution. Zoom can be changed between None and Full for any resolution.

If you want to zoom out of your picture, select None.


Is there a reason why my Xfinity remote light is red?

Replacement of the batteries should be performed if the Xfinity remote’s LED blinks five times when pressed. 


Related Posts:

Leave a Reply

Your email address will not be published. Required fields are marked *