GE Universal Remote CL4 Codes and Programming Guide [Updated 2022]

You will find a list of CL4 codes used to program GE Universal Remote Controls on this page. With the GE Universal Remote CL4 codes, you will be able to control and operate all of your devices with one tool. Therefore, you will no longer need to use separate remote controls for each device. Your entertainment experience will be more convenient and seamless this way, and this will totally be a lifesaver.

 

ge universal remote cl4 codes
GE Universal Remote CL4 Codes

 

How to program GE Universal Remote CL4 Codes

GE universal remote Cl4 codes are custom-made to correspond with the brand and type of your device. In order for the programming method to work, you must choose the GE universal remote CL4 codes with the appropriate indication. The process will take some time. Be prepared to spend some time as you will encounter repetitive steps. The process isn’t complicated, however. In order to further assist you with the process, here are the steps you need to follow to program your remote to your device:

Gather the codes for your device before starting the process so that you don’t waste too much time scrolling through the GE universal remote CL4 codes list. 

Additionally, make sure your remote control’s battery is fully charged. Plug in your devices and turn them on.  

Press and hold the SETUP button to enter SETUP mode. Release once the red light appears. 

Select the correct device type by pressing the device button. The red light will blink again once you’re done selecting.

A prompt will appear on the screen asking for the GE universal remote CL4 code. When the final digit is entered, the red light will come on.  

Test out a few of the GE universal remote CL4 codes once you’ve provided the codes to ensure everything is working. In the event that some keys don’t follow their commands, you’ll need to repeat the steps and use another GE universal remote CL4 code. 

The same procedure applies if you wish to program other devices.

 

 

 

4 Digit GE Universal Remote CL4 Codes for TV Sets

  • KONKA – 1671 2191 6181 2241 4621 4971 0471 0521 5891
  • ROKU TV – 6171 6001 2891 1741 5931
  • HYUNDAI – 4651
  • WESTINGHOUSE – 2141 0111 5781 6171 5971 5981 2891 1741 3241 1891 2281
  • ONKING – 941
  • INFOCUS – 3421
  • SYLVANIA – 1381 1021 1221 1801 2761 0371 0001 0931 0961 0321 4761 3701 0141 0201 0231 0941 0951 1821 4731
  • MAGNAVOX – 5741 4761 4261 0141 6171 0975 4191 2891 1741 4641
  • MGA – 0001 1221 1581 1711 1801 1911 1921

  • JVC – 5071 1801 1911 5281 6171 1481 0901 1281 0311 2891 1741 0481 0771
  • MEMOREX – 1711 0001 0211 1221 1631 1661 2401 4251 5001
  • ÖLEVIA – 3081 2771 2791 5151 5161
  • SKYWORTH – 0701 0691 6191
  • PIONEER – 0401 1221 1981 0001 1371 1511 1841 4021 4661
  • TELERENT – 1661 1691 3421
  • SUNBRITETV – 3081 3521
  • OPTONICA – 0341 1441
  • KURAZAI – 1661
  • INTEQ – 1771 1781
  • ONWA – 1941 2191
  • PILOT – 0001
  • TOSHIBA – 1801 1841 1311 0211 4891 4941 5081 0341 0821 1571 1911 5531 2691
  • MAG – 5541
  • SUPREMACY – 0151
  • VENTURER – 3781
  • PRINCETON GRAPHICS – 1301 1441
  • NEC – 0001 0341 1221 1431 3451 1801 1841 2151 3431 4401
  • PROVIEW – 2401 2421 2431
  • KENWOOD – 0001 1221
  • TECHWOOD – 0001 0051 1221
  • MOTOROLA – 1441 2151 3431
  • TATUNG – 1141 1741 2151 3431
  • MAXENT – 0501 3361
  • SIGNATURE – 1661 1691 2171 3421
  • MINTEK – 4231
  • VIKING – 0151
  • LIQUIDVIDEO – 0881 1111
  • SUPERSONIC – 1421 0241 4701
  • ORION – 0371 0281 1771 1781
  • MULTITECH – 2191
  • KLH – 0191
  • STARLITE – 2191
  • SEMP – 3611
  • SUPREME – 1901
  • NAXA – 1421 2141
  • PRISM – 0051
  • SCEPTRE – 3521 4071 5111
  • RCA – 2131 2381 2361 1001 6171 2481 1731 2891 1741 2141 1521 3571 2011 4921 0001 3431 2121 2371
  • PROTRON – 3731 4301
  • HP – 3491
  • KOGI – 4871
  • MONIVISION – 0491
  • VIDTECH – 0001 0251 1221
  • NTC – 1011 4321
  • JENSEN – 2271 0001 1221

 

New GE Universal Remote CL4 Codes for TV Sets:

  • INFINITY – 4791

  • RHAPSODY – 0011
  • LXI – 0001 0261 0931 1221 1691 4011 4731
  • TEKNIKA – 0001 0151 0961 1221 1571 1661 1711 1911 1941 2191
  • INTEGRA – 1841
  • PULSAR – 0001 1771 1781
  • VICTOR – 1481 4121
  • SV2000 – 4761
  • MEGATRON – 0001 1221 1271
  • JANEIL – 0151
  • LOGIK – 1661 1691 3421
  • SCOTT – 3215 0001 0021 0281 1221 1711 1941 2191 5141
  • KAWASAKI – 4741
  • MOTEVA – 1261 3661
  • MYRON & DAVIS – 2101
  • REALISTIC – 0001 0341 0931 1941 2191 4731 1001 1701 1221 1571 1911
  • RUNCO – 1771 1781 1841
  • KAWASHO – 0001 1221 1901
  • HAIER – 6141 6171 0921 2141 2891 1741 6151 0671 0861 3831 4851
  • HARVARD – 2191
  • SELECTRON – 2471 2491 2501
  • JCB – 1901
  • SHOGUN – 0001
  • SOUNDESIGN – 0001 0961 1221 1711 1941 2191
  • SYNTAX – 2431 5151 5161
  • OPTOMA – 3121 2441
  • MISAKAI – 1381
  • KLOSS NOVABEAM – 0151 1021
  • SONY – 1071 5811 5321 4981 1901 2741
  • WHITE-WESTINGHOUSE – 5241 0601 1551 4731 0931 1501 1521
  • PYLE – 3331
  • SILO DIGITAL – 5881

  • PHILIPS – 0181 6171 6221 0201 0911 3981 4261 5741 2891 1741 6051 
  • SIGNET – 2811 2821 2861
  • NAD – 0001 0401 1221 1311 4021
  • LOEWE – 1871
  • VISTEON – 3411
  • ONCOMMAND – 1861 3991
  • TVS – 5241
  • SSS – 0001 1941 2191
  • MEI – 0011
  • MULTIVISION – 0081
  • NIKO – 3581
  • TMK – 0001 1221
  • KDS – 5541
  • NET TV – 0121 0501
  • HAUPPAUGE – 3791
  • TANDY – 1441
  • TRUTECH – 0141 2461 3821 4551
  • SHARP TRINITRON – 4105
  • HALLMARK – 0001 1221
  • MAJESTIC – 1661 1691 3421
  • VIZIO – 5631 5561 6121 6131 5611 6111 5651 5621 5711
  • HELLO KITTY – 5391
  • HANNSPREE – 5451 5461 5291
  • PRECISION – 0621
  • STAR SIGHT – 0061
  • SPECTRA – 1611

  • TECHNICS – 0051
  • NIKEI – 1941
  • LUXMAN – 0001 1221
  • OPTIMUS – 0401 1571 3551 4021 5201
  • SVA – 0671 2101
  • NEXXTECH – 0871 1201
  • KAYPANI – 0391 4221
  • MARANTZ – 0001 1221 1841
  • PROTON – 0001 0391 0641 1221 1911 2231 4211 4221 4271

 

GE Universal Remote Cl4 Codes for Blu Ray Player

Configuring a GE remote to replace your original blu-ray remote is an easy and cost-effective way to do so. For any smart device to work with GE Cl4, universal remote codes and program instructions are crucial. Below are the GE universal remote cl4 codes for all remote brands.

 

Read More About: Universal Remote Codes

 

  • MANHATTAN – 5381

  • PLANAR – 4251
  • SOVA – 3631 4431
  • VIDEOCON – 4061
  • SAMPO – 0001 0121 0391 0501 1221 1911 4221
  • LUCE – 0301
  • IMA – 2191
  • SIMPSON – 0961
  • SPECTRAVISION – 2341
  • QUASAR – 3551 1091 0051 1491 1571 3451 2151 3431 5201
  • SANYO – 1161 6171 5261 2891 1741 5251
  • HEWLETTPACKARD – 3491 4881
  • PIVA – 2411 5021
  • SUPERSCAN – 4761 1291 2021
  • TCL – 6171 5961 6031 5771 2891 1741 6201
  • LASONIC – 1211 1611 4811
  • KTV – 0011 1491 1681 1941 2191
  • MAGNASONIC – 1711
  • INITIAL – 4231 4821 5031 5041
  • VIEWSONIC – 3751 1171 1411 5301 0501 1981 3801 4281
  • WARDS – 0001 0021 0321 0341 0791 0961 1021 1221 1321 1661 1711 1951
  • PROSCAN – 5781 5421 0261 2061 2301 4011 4191 2361 2371 2381 0221 1651 1731 2131 2141
  • ILO – 5171 1381 3215 5031 5141 1141 2391 3691 4231
  • KWORLD – 2931
  • PHILCO – 2321 0141 0001 0321 0961 1021 3451 1221 1671 1801 2151 2941 3431 3931
  • SHARP – 5341 6001 6171 6011 3191 2891 1741 5941 0001 4105

  • PANASONIC – 6231 5821 5201 5531 1571 5561 5201
  • ONKYO – 3101
  • PRICE CLUB – 0351
  • UNIVERSAL – 0791 1951
  • NIKKO – 0001 1011 1221 4321
  • TELECAPTION – 0821
  • MEDION – 1101 1141 2351
  • ZENITH – 6021 5281 1181 0001 1781 0061 0931 1631 1031 1221 1251 1661 2171 2291 3501 4321 4731 4751 4791 4941 5211
  • PORTLAND – 0001 0251 1011 1081 1221 1551
  • SAMSUX – 1221
  • HKC – 5721
  • MTC – 0001 0011 0251 0351 1221 1311
  • MITSUBISHI – 3271 1811 0251 0001 1711 1221 1581 1801 1921 2701
  • LEGEND – 1891 0581
  • NORCENT – 0511 0671 2181
  • SOYO – 4611 5101
  • PRIMA – 0381 0581 0631 0871 2451
  • ISYMPHONY – 2141 3041
  • HITACHI – 4331 6171 0925 2891 1741
  • PHILIPS – MAGNAVOX 0681 0911 2321 4791 4991
  • ONN – 6171 5961 2891 1741
  • SEARS – 0001 0211 0261 1221 1581 1711 1911 4011 4761
  • HISENSE – 6161 1651 6171 2081 5331 2891 1741 2211 2141 5341 0001 0671 4391
  • SONIC – 0011
  • LG – 6021 6171 0001 5511 2891 1741 3001 1911 1181 1221
  • MIDLAND – 0051 0261 0811 1691 1781 4011
  • YAMAHA – 0001 0251 1221 1571 3551
  • SUPRA – 0001 1991
  • INSIGNIA –  2271 1741 0141 6181 3761 4371 4721 4761 5051 5061 5181 0581 0871 0921 2921 2241 2891 6171 0371
  • MINUTZ – 1951
  • TEVION – 1141
  • KEC – 2191 1941
  • RADIO SHACK – 0001 1571 1701 1941 2191 4731 0341 0931 1001 1221 1911 4921
  • JC PENNEY – 1451 1911 0261 0791 1921 1951 0001 0051 4011 0961 1221
  • SAMSUNG – 5791 5801 3301

  • MONTGOMERY WAR – 1661 1691 3421
  • TERA – 0001 0641
  • SANSUI – 5411 0211 1381 2891 6061 6071 1631 5551 5241 5851 5861 5871 6051
  • SANTECA – 0171
  • SCOTCH – 0001 1221
  • NEXUS ELECTRONICS – 1651 6021
  • SAMTRON – 0351
  • LODGENET – 1661 1691 2091 3421 4091
  • SEIKI – 1263 5751 6091

 

GE Universal CL4 Remote Manual

The new GE universal CL4 remote comes with a user manual. User manuals for universal remotes are a great way to learn everything about your GE universal remote. This could include remote key functions, programming methods, code instructions, batteries, etc.

 

How to program a GE Cl4 universal remote control without codes

General Electric’s universal remote control allows users to control up to four home entertainment devices. Programming codes must be entered to program these GE Cl4 universal remotes to operate a particular device. To program the GE remote, follow these steps if you also have a GE cl4 universal remote, but you do not have a user manual or working cl4 universal remote codes:

  • Turn on the device you want to program the remote for. Make sure no other programmable devices are on.
  • Press the code search key on the GE remote until the red light of the remote is illuminated, then release it.
  • Click on the device key that you wish to program. For example, if you wish to program a DVD Player, click on the “DVD” button.
  • Release the Power key until the device turns off. Wait a few seconds between pressing the Power key. You may have to press the key up to 250 times before the device turns off.
  • Press the Enter button once the device turns off to save the CL4 code to your GE Universal remote.

 

Read More About: How to program GE Universal Remote without Codes?

 

GE Universal Remote Auto Code Search

A universal GE remote can be programmed in many different ways. Auto code search is one of the most popular methods. In this programming method, you don’t need to manually enter the GE universal remote CL4 codes; the remote will automatically find the correct code for the device you’d like to configure. All you need to do is select the code and proceed. If the remote doesn’t work after programming, then you may need to choose another code and repeat the process.

  • Hold down the SETUP key until the LED light on the remote starts illuminating.
  • Now click and release the selected device key (like TV, DVD, CBL, AUD).
  • Enter the first four digits of the device GE Cl4 universal remote code. The led light will go out.
  • Aim the universal remote at the device and test the keys. Try again with another GE Cl4 universal remote code of your device if the steps don’t work correctly.
  • Repeat the above process for each smart device you want to configure with the universal remote.

 

Conclusion:

This post may be helpful to you if your GE universal remote accepts the CL4 code list version 4 to configure it to your device. We update our website with a variety of universal remote codes and programming methods. Please let me know if you have any new universal codes or want us to update any other remote universal codes.

 

Read More:

Leave a Reply

Your email address will not be published.