Singer TV Remote Codes and Programming Guide [2022]

There is no real challenge in finding Singer TV Universal Remote Codes. You will get the remote here just for your android devices. The Singer TV will work with your universal remote once you have programmed it with the correct code.

Therefore, you should undergo the process of obtaining the remote codes. Utilizing this remote on your various devices will allow you to take full advantage of the features of the remote. You will even find your TV of every brand.


4 Digit Singer TV Universal Remote Codes

  • 0129
  • 0556
  • 0698
  • 1556
  • 0462
  • 0036
  • 0335
  • 0037
  • 0119
  • 5021
  • 5024
  • 0398
  • 0114
  • 0806
  • 0064
  • 0009
  • 1564
  • 0087
  • 0362
  • 0163


3 Digit Singer TV Universal Remote Codes

  • 041


5 Digit Singer TV Universal Remote Codes

  • 19405
  • 10125
  • 11922
  • 15722
  • 16032
  • 18832
  • 17921
  • 16124
  • 16915
  • 10508
  • 16440
  • 12020
  • 13001
  • 15820
  • 15526


How to program the Singer TV Universal Remote without codes

This method automatically scans all universal remote codes on the remote. To program your remote control, one code at a time is scanned. To do this:

  1. You can use the universal remote to control a smart device, such as a TV.
  2. Turn on the device by tapping on the button (TV, DVD, CBL, OK/SEL) for 3 seconds. The device will turn on and an LED light will appear.
  3. Click “CH+” and “CH-” on the remote when you are pointing at the device. If a signal appears, you are pointing at the device. When you continuously press the “up” or “down” key, the device will shut off.
  4. Click on “power” to confirm your code. It will turn on. By changing the channel if it starts, you can verify that the remote is programmed correctly.
  5. Tap “device” after you have saved the code. The device’s LED blinks twice after the code is saved.


This is a manual method for programming Singer TV universal remote controls.

In order to program the universal remote, you need to know the keycode for the equipment.

  • It first needs to be turned on.
  • Press the “TV” button on your “Singer TV universal remote.”
  • To enter “Learning mode,” hold down the “Setup button” of the remote control for several seconds until the “Light” flashes.
  •  Input the “Keycode” that you collected from the programing guide (Instruction Booklet)
  • Once you have pressed and held the power button on your remote, you can point it at the TV.
  • After the screen has turned off, you can release it.

Now your TV should work perfectly with the universal remote control. In case of a need, repeat the process using a different reference table code.


Instructions for Programming a Singer TV Remote Control with Code Search

In the event that you cannot find the device’s code, the universal remote can be set to search mode. It is possible to engage search mode by entering a code from the manual.

  • Press the power button.
  • Immediately press the “Setup” button.
  • Type in the three-digit code 9-9-1.
  • Hold the “Power Button” while waiting for the TV to turn off.

Finding your key code might take a little longer, but it’s very important. You should be able to use the remote for all the in-built functions once you have completed the above procedure.

Now that you have completed the informative article, you can easily apply the universal codes to your Android device using the remote. Therefore, I would suggest you follow the above procedure to get universal codes without wasting any time. So hurry up and let us know if you have any issues with this article. Your problem will be resolved.


Read More:

Leave a Reply

Your email address will not be published. Required fields are marked *