Would it be possible for me to do anything to fix my TV screen that has suddenly turned pink?

It is quite likely that you will panic when you see your TV screen turn pink for the first time (more specifically the first time you see it). Fortunately, you do not need to worry about your TV being damaged if you notice a pink screen on it.

Moreover, the pink screen on the TV is very easy to troubleshoot and that is why it is very common.

Here are a few things you need to know about Pink screen on TV:

• The seven most common reasons for a pink screen on your TV.
• How to fix a pink TV screen using sever easy troubleshooting techniques.
• How to remove the pink tint on TV by changing the device’s color space.
• How to fix pink screens caused by HDMI handshake failures.

 

Do you have any clue why the color of my TV screen is pink?

Your TV screen looks pink because of a loose HDMI connection between it and an external device. A damaged cable or an improperly seated cable can cause this problem. During the setup process, there may be a failure in the HDMI handshake. In addition to having an incorrect color space, outdated software can also be a contributing factor to this issue.

 

This article will explain why your TV screen is pink and how to resolve it: Seven Reasons.

#1: Pink screen on TV due to an electronic glitch.

Have you ever noticed that your TV screen turned pink one day while you were watching television?

Possibly, the problem is caused by an error in the software that is causing the problem.

Note: There is important to note that this is a temporary disruption in the system that will only last a short period of time. In some cases, this can result in malfunctioning or non-working TV functions.

It is hard to describe what a glitch is, but it can be a problem with your TV:

• The speed of the TV is slowing down.
• There is a freezing or lagging of the TV.
• The TV does not respond to commands given to it.

It is possible for the TV screen in your case to turn pink when it is turned on.

 

How to fix Pink Screen on TV due to electronic glitch:

It is very easy to resolve software glitches on your TV: You just need to refresh your TV’s system in order to resolve them.

There are two ways in which you can do it, either by:

• Turning off the TV unit is the first step.
• You should power cycle the TV unit (also referred to as a “reboot”).

If you wish to find out more about how to use it, please refer to the instructions provided below.

 

The first method: You have to turn off the TV.

Note: Is your TV equipped with a physical power button, then you can do this. 

It is usually situated beneath the TV logo or on the side of the unit, depending on the TV.

1. During the pink screen on the TV, tap the POWER button.
2. Ensure that you wait for a minimum of five seconds before proceeding.
3. It is now time to turn the TV on by pressing the POWER button one more time.

 

The second method: Power cycle your TV in order to resolve the pink screen problem.

1. The TV should be turned on by turning the power switch.
2. It is necessary for you to unplug the TV from the power source in order to be able to do this.
3. After 30 seconds, you ought to be surprised to see the results.
4. The TV must then be plugged back into the power source.

Turning off your TV’s circuit breaker would work if you can’t access the power cord.

 

#2: A pink TV screen can be caused by an overheated cable box.

Could it be that you left your cable box and TV on overnight without turning them off?

The pink screen on your TV may have been caused by this, if that is the case.

A cable box may overheat if it is left running for a long period of time without being turned off. 

It is possible for this to happen in one of two ways:

• It may temporarily lose some of its functionality as a result.
• A pink screen happens when you lose a good connection with your TV.

 

A simple way to fix the pink screen on a TV due to overheated cable box is as follows:

In order to fix it, you simply need to restart your cable box and either:

• Restart your TV by switching it on and off again.
• Once you have turned the TV off and on, turn it back on again.

The first method : Restart the cable box by power cycling it.

1. On the cable box, make sure it is powered on.
2. Remove the power cord from the outlet and plug it back in.
3. The process should take at least two minutes.
4. It is necessary to reconnect the cable box to the television.

Unplugging the cable box for a few minutes will help it cool down since it is overheating. Thus, the device is able to resume its normal operation as a result of this process.

 

Switching on and off the cable box is the second method of activating it.

Note: You should do this if you wish to use your cable box immediately.

1. On the device, ensure that it is powered on.
2. It is feasible to switch off the device simply by pushing down on the POWER button.
3. Please wait for a few seconds before continuing.
4. You will need to tap the POWER button another time to turn it on.

For a better understanding of how this method works, you can also take a look at this video:

 

#3: The color space is not the same.

“After connecting a new external device, my TV screen has turned pink.”

There is a possibility that your devices’ color spaces do not match, if that is the case.

Note: The color space refers to the set of colors your device supports and is sometimes called the video format.

There are two primary kinds of color spaces used by most image-outputting devices:

• YCbCr.
• RGB.

Your TV screen will not necessarily turn pink if you use these two color spaces.

You may experience a pink screen if your devices have a problem determining what color space to use.

 

How to fix pink screen on TV due to unmatched color space:

Your TV settings allow you to set the color space for your HDMI device and fix this problem easily.

Note: It is important to note that the actual steps vary depending on the brand and model of your TV.

However, here is a typical way of going about it:

1. Make sure you are in the settings.
2. You can choose between “Display” and “Setup.”
3. Then click on the “HDMI” button.
4. Click on the “Screen/color settings” button.
5. After that, you’ll be able to choose the color space.

The best way to fix the pink screen problem is to switch between RGB and YCbCr to see which one fixes it.

 

#4: There is a loose connection.

The reason for an intermittent pink TV screen is that your HDMI connection is loose or faulty:

It is usually caused by a loose cable connection when your TV receives weak signals from your input device.

HDMI connections can become loose for several reasons, including:

• An incorrect setup has been made.
• There is a loose HDMI port on the device.
• The cable is improperly seated.

 

How to fix pink screen on TV that appears as a result of a loose connection?

Disconnect and reconnect the input device to the TV to fix a loose cable connection.

This can be accomplished by:

1. If the HDMI cable is connected to the TV, it should be unplugged.
2. It should take about three to five seconds for the process to complete.
3. Once the cable has been reconnected to the TV, plug it back in.

Here’s another method you can try if that doesn’t work:

1. Take the TV out of the socket and unplug it.
2. The HDMI cable should be connected to the TV port and then disconnected.
3. Switch on the TV and make sure it is plugged in.
4. It is important that the HDMI cable is attached to the TV port again.

What is the most reliable way to figure out if a cable is seated properly? ”

If the cable is properly seated, it will:

• It is possible for the TV to recognize the input source quickly.
• As soon as you insert the cable into the port, you hear a “beep”.
• Even if you move the cable around, the cable plug doesn’t easily disconnect.

 

#5: The HDMI cable seems to have a fault that demands a bit of care.

It is also possible for your HDMI cable to be damaged if the connection is loose and faulty.

Video signals from the source to the TV cannot travel through bent or cut cable wires.

Therefore, you will either see a pink screen or a black screen on your TV.

Here is a checklist you can use to determine whether your HDMI cable is faulty:

• Has the HDMI connector been bent or burned?
• Does the HDMI connector have some pins pushed back?
• Are there any exposed wires on the cable, especially at the ends?

Note: HDMI cables have small gold components called connector pins.

Consider your HDMI cable defective if you answer “Yes” to one or more of these questions.

The other option is to try another cable to determine if it’s faulty.

 

How to fix the pink screen on TV that is triggered by faulty HDMI cables?

Only a high-quality HDMI cable will fix a faulty HDMI cable, and that’s the only way to fix it.

A HDMI cable end can be classified into three basic types:

1. Type A HDMI cable (Standard).
2. Type D HDMI cable (Micro).
3. Type C HDMI cable (Mini).

As the name implies, HDMI is the standard that is commonly used in HDMI ports on TVs.

To use your input device, you would need to get one of the following:

• Cable that connects HDMI Standard to HDMI Mini.
• Cable that converts HDMI standard to micro.
• Cable from HDMI Standard to HDMI Standard.

 

#6: There is a problem with HDMI handshake.

“When I plug in a new source or change sources, the screen on my TV turns pink.”

This means that the problem must be caused by a failure in the HDMI handshake, given that situation.

Note: The HDMI handshake is a method for recognizing and communicating between devices. 

The TV screen will turn pink when it fails to output video content from the input source.

HDMI handshake failure can be triggered by many reasons, for instance:

• An incorrect setup has been made.
• Glitch in the electronic system.

 

How to fix pink screen on TV due to HDMI handshake failure?

Despite the fact that the term “HDMI handshake failure” sounds complicated, it is very simple to fix. 

All you need to do is refresh the connection between the input source on your TV and the TV itself.

There are three ways in which you can accomplish this:

 

The first method is to switch sources.

Do this when: You have several sources plugged into your TV. And your TV screen turned pink after plugging in a new one.

1. It is feasible to do it by pushing the SOURCE button on TV remote.
2. Use the navigation buttons to select any source.
3. Repeat step #2 until the pink screen is gone.

 

The second method: You can try another port to see if it works.

This is what you should do when your TV screen suddenly turns pink while you are watching TV.

1. Your device must be turned on before proceeding with this method.
2. Make sure that your input source is disconnected from the TV.
3. Connect it to another HDMI TV port that is available on the TV.

 

The Third Method: Disconnect the cable from the TV and turn off the TV.

The next instance you turn on your TV, you should do this if the screen is pink.

1. Make sure that the devices are turned on before you begin using them.
2. You will need to disconnect the input source from the TV port in order to do this.
3. Take a moment to wait for about three to five seconds.
4. Ensure that the input source is connected to the TV again.

 

#7: Outdated device software

Maybe your TV or input source software is outdated if you’ve tried everything already.

Note: When it comes to software, it is defined as a set of programs that make your device work and function.

In some cases, it is possible that you may be unable to use some of the functions of your device if it is outdated. In addition, your TV’s input device needs to be able to recognize and connect with it.

 

How to fix Pink Screen on TV due to outdated device software?

To resolve this specific problem, all you need to do is update the software on your device.

Note: The process of updating the software on your device might differ depending on the type of device you have.

In order to resolve this issue, I recommend reviewing your product manual or visiting your manufacturer’s support page.

 

Read More: