Suppose you have recently purchased a universal remote control, and you want to have the remote codes for operating the Home Theater audio. In that case, we have home audio remote codes for Onkyo, Daewoo, Cambridge, Integra, Koss, Sony, Venturer, Panasonic home theatres which would work for programming and controlling the Home Theaters. The below home theaters audio codes e.g. rcr414bhe remote codes would be suitable with most universal remotes.

rcr414bhe home theaters audio remote codes

4 Digit Remote Codes for Home Theaters:

Below is the list of 4 digit Home Theater audio codes for managing home theatres’ operations in a remote manner.

3 Digit Remote Control Codes for Home Theaters: 

Below is the list of 3 digit Home Theater audio codes for managing home theatres’ operations in a remote manner.

RCA Home Theater Universal Remote Codes

If you are trying to manage RCA home theater operations with rcr414bhe Home Theater remote control codes, below are the home audio codes for operating your RCA. If one code fails to work, keep on trying the other codes from the same list until you find the applicable code. The most popular Home Theater codes for RCA Home Theater are listed below.

Please try to use the below remote codes with the unit switch on for testing if the unit would power off.

How to Program a Universal Remote:

Below are the steps for programming a universal remote for Home theater:

• First of all, do testing of the Home theater in an audio mode by using 1254 taken as a setup code.
• Now click on the “Setup” and put 5 digit code of 51988.
• After some time, The remote would transfer an IR signal.
• Having a hold of the 5 digit code would change the signal for repeating and slow down the volume.
• There are 3 main methods for setting up and configuring the universal remote: Keycode, Manual setup, and Programming by Universal Remote Code Search.

Programming RCA Home Theater Universal Remote with Auto Search Method

The home audio remote codes are put under Remote’s scanning process in this auto search method. It does scan one code to find the appropriate Home Theater codes, which would work with your Remote for programming the control. Implement the below instructions.

1. ” Turn on” the smart Device such as the TV which you wish the universal Home Theater remote code for operating.
2. ” Power on” the remote, click on the device button(TV, CBL, DVD, OK/SEL) for few seconds. The LED light reveals that the gadget is ready for programming.
3. Then, position the remote in front of the Device and tap on the “Ch-“or “Ch+” button. Remote will indicate the on/off signals. Click on the “up “and “down” keys until the appliance would switch off.
4. Do verification of code by tapping on the “Power” key. The gadget has to Power on. If it turns on, change the channel to verify that the remote programming is done correctly.
5. Now, click on the device button to save the code. The Device LED would flash twice for the confirmation of the stored code.

Programming RCA rcr414bhe Home Theater Universal Remote with Manual Method

By using the Keycode, you can easily do programming of rcr414bhe universal Remote. The Keycode would make identification of the equipment model.

• First of all, switch on the Device.
• Click on the “TV” button on the “RCA rcr414bhe Home Theater universal remote.”
• Now, click on the “setup button” and hold it until it reveals the light flash.
• Now, Put the Keycode or one of the applicable code from list of rcr414bhe Home Theater remote control codes that is mentioned in the instruction booklet.
• After implementing all these steps, Position the remote in front of the TV and click on the power button & hold it.
• Let out the “Power button” when the screen turns off.
• The Device would work effectively with the universal remote control; if the gadget is not working, repeat these steps with other code from the given table.

Programming RCA Home Theater Universal Remote with Code Search

How to program RCA rcr414bhe Home Theater Universal Remote with Universal Remote Codes? However, if you cannot find the Home theatre code that is suitable for a device, you could do the setting of the universal remote with code search mode for the right one. It is a code in the manual that implies the remote into the search mode

1. Switch on the Device.
2. Now click on the “Setup” key and hold it.
3. Put the three digit “9-9-1” code.
4. Now, keep holding the “Power” button on the remote and click on the channel up button until the Device switch off.
5. This method might take some time, but it is essential for searching the Keycode or rcr414bhe home theatre code. Once remote into the search mode, you have performed all the steps, your remote would work for all the functions.

Panasonic Theatre system remote

Panasonic Theater Remote is an intuitive and easy application that allows easy operations and control. You could make a customized sound for Panasonic Blu-ray DiscTM Home Theater by using an Android device on a Wi-Fi network. You could see and feel variant Home Theater acoustic impact displayed as animation on your Android gadget. Panasonic is revealing all the retrospective amplifier operations and indicates an analog experience. With the flick or tap of fingers, IR remote functions are accessible.

Key Features:

• Controlling Panasonic Blu-ray DiscTM Home Theater models with your Android device’s help from home’s any location.
• Playback operations could be managed by taking the prominent dial feature into practice.
• Having an experience of acoustic impacts by viewing animations of Sound or Surround Effects.
• A warm retrospective amplifier design controller could be revealed from three generations.

Set a Panasonic Remote Code

The Panasonic universal remote is the best solution to manage enormous devices from the individual remote control. It simplifies cable, television, and stereo controls by making a master control for all. Before the remote starts working, each Device’s programming should be done using Panasonic remote codes for connecting the Device to the Remote.

Program Each Device With Universal Remote Control

• Turn off the Power for each Device that you want to program. Make sure that you should use fresh batteries.
• Click on the “Action” and “Power” buttons simultaneously. For 5 seconds, hold buttons and release them. It would initiate the programming mode.
• Firstly, click on the device button and put the associated code. For instance, choose “Cable” and then put the code for connecting the remote to the cable box. Click on the “Power” button for testing the cable. It would switch on from the remote if the code is put adequately.
• Iterate these steps for the stereo system, DVD player, TV, or any other compatible device you want to connect. Turn on the Power for every gadget for testing connection.

Using the Programmed Remote

Majorly, Panasonic remote models possess a button for particular devices and an individual power button. A Power button is also available for the whole system. For turning on the specific Device, make a selection of Devices and click on “Power” for turning on. For instance, Powering on the DVD player need that firstly, you have to click on the “DVD” button for activating the particular connection before clicking on Power. You could use the Power button for the complete system for activating everything. It would switch on the cable, television, and sound. They all have to switch off their work in a proper manner. If you switch off the tv & sound except for cable, you have to turn on the complete system. It would turn off the cable while activating sound and TV.

Conclusion:

According to different models and brands of Home Theaters, choose an appropriate digit Home Theater codes for enjoying all the operations in a remote manner. If one code is not suitable for your Device, select another code on the same list, and in case of any difficulty, take the help of the manual.

Read More:

The post Home Audio Remote Control Codes appeared first on My Universal Remote Tips And Codes.

The remote variable operations of the Memorex DVD player could be handed in a better manner by using the universal remote control. Memorex DVD player Remote codes of 3,4 or 5 digits perform all the remote controlling operations. These codes work well with a wide variety of SAT or cable controllers. Suppose you are having difficulty getting a particular remote code for your DVD appliance. In that case, We provide you this convenience by listing all the remote codes for variant categories of Memorex DVD players.

Memorex DVD Player Remote Codes

Tips for getting the remote code of your DVD player

1. Are you facing trouble in finding the remote code of your DVD player? Try these easy steps by yourself and get the remote code to manage operations remotely:
2. Turn on the DVD player.
3. Afterward, click on the “AUX,” “DVD,” or “TV” button with the help of a remote.
4. From the appeared option from the pop-up box. Select the “RCU SETUP” button still; the appliance starts blinking.
5. With the help of a numeric pad, simultaneously click “9” “9” “0”.You will see that the button of the DVD will start blinking after you press the buttons.
6. To get the code’s first digit, click on “1” from the numeric keypad and note down the frequency of button blinking. For example, If the button blinks four times, then the first digit code will be 4. Similarly, To get the code’s second digit, click on “2” from the numeric keypad and note down the frequency of button blinking. For example, If the button does not blink, then the first digit code will be 0. Similarly, you can find the 3rd digit of the remote code.

Program Memorex DVD Universal Remote with Code Search:

If you cannot get a particular code applicable for your DVD player, you can search for the remote code by search mode of the universal remote. This particular code would manage all the operations remotely.

• Initially, Turn on the DVD player.
• Afterward, click on the “Setup” Button and hold it.
• Then, put the three-digit code –”9-9-1″.
• Now, click on the “Power Button” on the remote. For a long time, click on the “channel up “button till the “turning-off” the TV.

After performing all the above steps, your remote will function in a proper remotely manner. 

Program Memorex DVD Universal Remote with the help of Manual Procedure:

Keycode helps in the programming of a universal remote, and with the help of this keycode, you can easily identify the DVD player’s model.

1. Turn on the DVD player.
2. From the number of options of Memorex DVD universal remote, select the “TV” option.
3. Afterward, from the universal remote, choose the “Setup button” until a light flash appeared on the remote.
4. Put the “Remote code” available on your DVD player’s instructions booklet.
5. Make a proper positioning of the remote in front of the TV. Then, click on the Power button and hold it for a long time.
6. When the TV screen turns off, let out the power button.

In case your TV or DVD player is not working, repeat all the above steps with another code from the reference table’s similar part.

How to Program Memorex DVD Universal Remote without Codes?

The auto search procedure will do scanning of the universal remote codes. Having the appropriate remote code for your DVD player scans one code at a time. Below are few steps that will assist you program the universal remote without codes.

1. Turns on the TV or any other appliance you want to operate the universal remote.
2. Now, switch on the remote and click on the “TV”/”CBL”/”DVD” button for a short period.The LED indicator light of the remote will blink.
3. Position your remote in front of the TV and press “VOL-” or “VOL+” buttons to high or low volume. You will see that the remote will indicates off and on signals. Until the TV turns off, click on the “up” and “down” keys repeatedly.
4. Test the working of code by tapping on the “Power” button. If the TV turns on, that means your Remote code is working in the right manner.
5. Lastly, click on the “Device” button to save that remote code for future usage. You will see again, the light of the LED of the TV will start blinking, which shows that the remote code is confirmed.

Mixed Memorex Player DVD Remote Codes

The general 3,4 or 5 digit remote control codes used for Mixed Memorex DVD player are discussed below. You can use these codes to control the Memorex DVD appliances remotely.

Memorex DVD Codes List:

Memorex DVD Player Remote Codes: Conclusion

With the help of the above 3,4 or 5 digits remote code, you could manage all your TV or DVD operations remotely using the universal remote code. If one code fails to work in your appliance, you can select the other remote code from the same category. Make sure to save the code in your device’s settings for future usage.

Read More:

• DirecTV Universal Remote control codes
• Feeling Out Of Control? Everything You Need To Know About Your Universal Remote
• Vidao Universal Remote Control Codes
• RCA Universal Remote DVD Player Codes
• How To Program Universal Remote To DVD Player
• 3-digits Universal Remote control codes for DVD Players

The post Memorex DVD Remote Control Codes appeared first on My Universal Remote Tips And Codes.

Are you in possession of a Craig DVD? Do you find difficulty in enabling it with your universal remote control? Then you are in the right place! Check the following guide and follow the steps mentioned to find the needed solution in just a few remote control clicks. No matter what brand you have, our guide will provide you with the most efficient set of codes and combinations that will easily work with your Craig DVD. However, In order to program your universal remote you can find Craig DVD Remote Control Codes mentioned in this article below.

As there is a wide variety of universally available control codes, individual code choices must be made. And this might lead to some operational issues, depending on the remote control brand. In such cases, we do not want you to worry as we have prompt solutions for such challenges.

Before proceeding, make sure that the DVD player is appropriately placed and all connections fixed as per the user manual to achieve optimal remote control setup. Any small connection error would prevent the setup process from happening successfully.

Craig DVD player Universal Remote Codes

Why Use a Universal Remote Control?

Universal remote controls save you from the hassle of using multiple remote controls for different devices. The universal remote can be programmed to be used with several devices like TV, Blu-Ray, DVDs, and more. Imagine having one remote only that can undertake the role of all others? It will give you the comfort that you’ve been looking for. Optimize your home theater experience by connecting your Craig DVD player with a universal remote control.

How does Craig DVD’s Setup Process Take Place?

We will provide you with lists of remote control codes and the main three methods to program the universal remote control to work with Craig DVD player: auto search method, manual method, and code search.

How To Program Your Craig DVD Player Using “Auto-Search Method”

This method starts with an automated scan to identify the codes available for setup. The remote control scans all the universal codes in a structured manner, one code at a time, until it finds the correct code that is most suited to work with your remote control brand. To optimize the setup results, follow the steps below.

1. Switch on the smart device you want to operate with the universal remote control. This can be your TV or computer, for example.
2. Turn on the remote control and then press the “DVD, TV, CBL, and OK/SEL” buttons for 3 seconds. Once the LED light is on, the device is ready for setup.
3. Point the remote control towards the device and press on “CH+” and “CH-.” The remote will show on/off signals simultaneously. You will need to press the “up” or “down” buttons continuously until the device switches off.
4. Click on the “power” button to verify the code. At this point, the device should switch on. It is advisable to keep changing between channels at this point to make sure that the remote control has been programmed successfully.
5. Press on the “device” button to save the correct code. Make sure that the LED light of the device blinks twice; this is a confirmation that the code has been successfully stored.

How to Program Craig DVD Universal Remote With “Manual Method”

This programming method uses the keycode mechanism. Like the previous method, the keycode identifies the device’s make and model and then identifies the correct code for your device. The following steps are crucial; they will help you get the best results while manually setting up your Craig DVD player.

1. You need to start by turning on the device.
2. Click on the “TV” key of the Craig DVD player universal remote control.
3. Proceed by pressing and holding the “setup” key of the universal remote until a light flash appears. This a sign that the device is currently in “Learning Mode.”
4. At this point, click on the keycode that you have collected from the Instructions Booklet or programming guide. The final step synchronizes the code with the universal remote control to operate.
5. Point your remote control towards the device, and then press and hold the “power” key.
6. Once the screen switches off, release the “power” button.

At this point, your TV should start functioning well with the universal remote control. If, for any reason, your device does not operate with the remote, then try to repeat the same steps with a different code from the same reference table.

How to Program Craig DVD Universal Remote With Code Search

This method mainly combines the two previous methods, presenting the “Code Search” method. If you failed to find a suitable key code that works with your device in manual mode, then this method is your go-to savor. It puts the remote into “Search Mode” to locate the right control code. You need to find the manual’s code responsible for the “Search Mode” option in the remote. Follow these steps below for a successful connection.

1. You need to turn on your device first.
2. Press and hold the “setup” button.
3. Enter the three-digit code from the remote’s keypad: “9-9-1”.
4. Keep holding down the “power” button of the remote control and then pressing the channel “up” key until the device switches off.

This method might take more time than other methods, but it is crucial to find the correct key code first. Once you have followed all the steps stated above, your universal remote should operate well.

Craig DVD Player Remote Control Codes

Craig DVD Player Four Digit Remote Control Codes:

• 1484
• 1036

And since you are here, here is a list of the Most Popular Remote Codes for Craig Products for different Universal Remotes:

Charter Spectrum Universal TV Remote Control Codes – UR5 8400A

• Craig Most likely code: 028 Others to try: 054, 043

2 Digit Universal Remote Codes for All TVs

• Craig – 19,17,18,22,23,20,21

RCA Universal Remote Code – RCU Series, Systemlink series

• Craig 064

3 Digit Universal Remote Control Codes For all TVs

• CRAIG – 042,053

Comcast Remote Setup Codes For DVD/DVD-R Players – Remotes with Red and Silver OK Buttons

• Craig 20831

Comcast Remote Setup Codes For VCRs And TV/VCR Combos – Remotes with Red and Silver OK Buttons

• Craig 20037, 20047

Comcast Remote Setup Codes For TVs – Remotes with Red and Silver OK Buttons

• Craig 10180

Also Read: 

• RCA Universal Remote DVD Player Codes
• How To Program Universal Remote To DVD Player
• Universal Remote Codes
• All-In-One Universal Remote Codes
• How to program Xfinity Comcast Universal Remote?
• One For All Universal Remote Codes and Setup Guide

The post 3 Methods Easy Guide for Craig DVD Player Remote Control Setup and Universal Codes appeared first on My Universal Remote Tips And Codes.

If you want to use a universal remote control on your Onn DVD player, you will need to program the remote to your DVD player. And to program your remote to your DVD, you will need the Onn DVD universal remote codes. The codes are usually 4-digit numbers. You simply have to key in the codes using the number keys on your universal remote. Below the codes is a short tutorial on how to configure your universal remote to your Onn DVD player.

Onn DVD Universal Remote Codes

• 0575
• 0135
• 0205
• 0445
• 0975
• 0435
• 3135
• 1275
• 1105
• 1315
• 1185
• 1415
• 1515
• 1695
• 0825
• 1235
• 1405
• 1335
• 4455
• 1525
• 1975
• 1365
• 1325
• 1105
• 2995
• 2765
• 0205
• 2085
• 3835
• 3885
• 3315
• 3895
• 3905
• 3585
• 3685
• 4455
• 4465
• 4395
• 4355

How to setup codes for Onn DVD Universal Remote Codes

Step 1: Find the PROG button on your remove control and press down until you see a tiny LED light.

Step 2: Choose the ‘DVD’ option

Step 3: Find the correct DVD code for Onn DVD above and enter in the space for codes.

Step 4: If the light goes off when you enter the code, it shows you got the correct code.

How to Program Universal Remote Control for Onn DVD

Step 1: Switch on your ONN DVD set. Check to ensure the DTA is on and that it is installed the correct way.

Step 2: Hold your universal DVD remote to face the device you
wish to program.

Step 3: Find the ‘PROG’ option on your universal remote.  Hold on to the button until the tiny LED light on your remote lights up. Press on to the ‘INFO’ button.

Step 4: If you get the first three steps right, you will notice the tiny LED light will continue to blink.

Step 5: Find the correct code below that applies to your device and enter. Your DVD will show ‘Success’ once you get the correct code. If not, try another code. On the other hand, your DVD will display ‘Sorry’ if you enter an incorrect code. Repeat the process with another code.

Step 6: Press any of the functions keys on your remote control. If it works, that means you got the steps correctly. If it doesn’t work, repeat the steps and try with another code.

How to check if an Onn Remote is a Universal Remote

Some DVD remotes that comes with some Onn DVDs are universal remotes. Meaning you can use the remote to power other gadgets besides Onn DVD. To check if your Onn remote is a universal remote, check if has the ‘Set’ and ‘Mode’ options. If it does, it is a universal remote.

If you have any code that is not included in these, please help us add it to the comment box. We will really appreciate it.

Check out other categories to find universal remotes codes for different brands of your gadgets.

The post Onn DVD Universal Remote Codes and Programming appeared first on My Universal Remote Tips And Codes.

The Samsung DVD remote code is needed to program your Samsung DVD to a universal remote. The codes are 5 and 4 digits numbers. All you need to do is take any of the codes and key it in using the number pads on your remote. Note that as a result of variety in product series, the first code you enter may not work. You simply copy the next code until you get the right one. You only have to do this the first time you want to sync the remote. Subsequently, you use your remote without going through this process. Also, the process of how to sync your Samsung DVD to your universal remote has been outlined in the later part of this post.

5 digits Samsung DVD Universal Remote codes

• 10030
• 10814
• 11632
• 10110
• 10056
• 10019
• 10178
• 10032
• 10702
• 10060
• 10250
• 11581
• 11959
• 10766
• 10437
• 10702
• 10329
• 10587

4 digits Samsung DVD Universal Remote codes

• 0744
• 0490
• 1075
• 0820
• 0573
• 1932
• 1928
• 1936

How to setup codes for Samsung DVD Universal Remote codes

The first method to program your universal remote to your Samsung DVD has been explained earlier. If the method does work, you can make use of this alternative method.

Step 1: Find the PROG button on your remote control and press down until you see a tiny LED light.

Step 2: Choose the ‘DVD’ option

Step 3: Find the correct DVD code for Samsung DVD above and enter in the space for codes.

Step 4: If the light goes off when you enter the code, it shows you got the correct code.

How to program Universal Remote control for Samsung DVD

Step 1: Switch on your SAMSUNG DVD set. Check to ensure the DTA is on and that it is installed the correct way.

Step 2: Hold your universal DVD remote to face the device you
wish to program.

Step 3: Find the ‘PROG’ option on your universal remote.  Hold on to the button until the tiny LED light on your remote lights up. Press on to the ‘INFO’ button.

Step 4: If you get the first three steps right, you will notice the tiny LED light will continue to blink.

Step 5: Find the correct code below that applies to your device and enter. Your DVD will show ‘Success’ once you get the correct code. If not, try another code. On the other hand, your DVD will display ‘Sorry’ if you enter an incorrect code. Repeat the process with another code.

Step 6: Press any of the functions keys on your remote control. If it works, that means you got the steps correctly. If it doesn’t work, repeat the steps and try with another code.

How to check if a Samsung Remote is a Universal Remote

Some DVD remotes that come with some Samsung DVDs are universal remotes. Meaning you can use the remote to power other gadgets besides Samsung DVD. To check if your Samsung remote is a universal remote, check if has the ‘Set’ and ‘Mode’ options. If it does, it is a universal remote.

If you have any code that is not included in these, please help us add it to the comment box. We will really appreciate it.

Check out other categories to find universal remotes codes for different brands of your gadgets.

The post Samsung DVD Universal Remote control codes appeared first on My Universal Remote Tips And Codes.

If you are making use of the remote control that comes with your DVD player, you won’t need a remote code. This is because the remote has been pre-programmed before you bought it. But if you wish to use another remote, usually a universal remote to program your DVD player, there will be a need for a DVD universal remote code. Not just any code, but the correct code for your DVD player brand.

This post outlines the DVD universal remote codes for all popular DVD player brands. All you have to do is to find the correct code for your brand. Also, we listed more than one code for each brand. If a code doesn’t work, simply try another code.

3 digits Universal Remote codes for DVD Players

ADVENT – 899
AFREEY – 417
AIWA – 376, 414
AKAI – 357, 395, 435
AMES – 431
APEX – 386, 390, 391, 392, 401, 424, 430, 436, 439, 445, 457, 459
A-TREND – 393
AUDIOVOX – 896
AXION – 896
B & K – 898
BLAUPUNKT – 430
BODYSONIC – 417

BOSE – 672
BROKSONIC – 394
CHANGHONG – 401
CINEVISION – 405
CLASSIC – 401, 431
COBY – 317
CRITERION – 448
CURTIS INTERNATIONAL – 906
CYBERHOME – 393
DAEWOO – 440, 441, 444
DENON – 362, 400, 421
DENZEL – 428
DIGITREX – 445
DISNEY – 458
DUAL – 428, 446, 447
DVD 2000 – 402
ELTA – 434, 435

EMERSON – 396, 405, 456, 458
FISHER – 378, 416
FUNAI – 456, 458
GE – 403, 409, 430
GOLDSTAR – 396, 405
GO-VIDEO – 407, 426, 431, 455
GREENHILL – 430
HAAZ – 451, 452
HARMAN KARDON – 427
HITACHI – 404, 407, 419, 428
HITEKER – 445
INFINITY – 417
INSIGNIA – 405, 456
INITIAL – 430
INTEGRA – 422, 442
JBL – 427

JVC – 368, 406, 418, 901
KENWOOD – 400, 429
KISS – 428
KLH – 430
KONKA – 372, 373, 374, 375, 410, 411, 412, 413
KOSS – 415
LASONIC – 451, 454
LENOXX – 435
LG – 396, 405
LINN – 443
LITEON – 318

MAGNAVOX – 360, 370, 398, 408, 456, 900, 903, 904
MARANTZ – 360, 396, 398, 405, 408, 423, 903
MEMOREX – 446
MICROSOFT – 403, 409
MINTEK – 430

MITSUBISHI – 364, 402
MUSTEK – 431
NAD – 396, 405, 433
NAKAMICHI – 432
NESA – 430
NORCENT – 317, 318, 319, 905, 907
ONKYO – 422, 892
OPTIMUS – 404
ORION – 394
ORITRON – 377, 415
PANASONIC – 362, 363, 400
PACIFIC – 446
PHILIPS – 360, 362, 370, 387, 396, 398, 400, 408, 423, 437, 755, 891
PHILIPS-MAGNAVOX – 398, 408, 423, 900, 904
PIONEER – 366, 403, 404, 893, 897
POLAROID – 385
POLK AUDIO – 398, 408, 903
PORTLAND – 435
PROLINE – 415
PROSCAN – 365, 403, 409
RADIOSHACK – 404, 443, 449, 453, 894, 895
REOC – 451

RCA – 365, 403, 409, 430, 443, 449, 453, 895
ROTEL – 406
SABA – 894
SAMSUNG – 369, 407, 454, 455
SAMPO – 417
SANSUI – 394
SANYO – 416
SEARS – 394
SEG – 428
SHARP – 359, 397
SHERWOOD – 425
SHINCO – 430
SHINSONIC – 430

SONY – 320, 321, 322, 361, 389, 399, 909
SYLVANIA – 456, 458
SYMPHONIC – 456, 458
TEAC – 404
TECHNICS – 400
TECHWOOD – 433
TEVION – 388, 446, 447, 448, 449, 450, 451, 452
THETA DIGITAL – 404
TOSHIBA – 360, 394, 398, 436, 447, 890, 902, 908
UNITED – 449
WHARFEDALE – 417, 442
WHITE WESTINGHOUSE – 458
XBOX – 409
YAMAHA – 362, 400, 420, 900, 904
YAMAKAWA – 428, 438
ZENITH – 358, 367, 396, 405, 437

How to program Universal Remote control for Sony DVD

Step 1: Switch on your DVD player. Check to ensure the DTA is on and that it is installed the correct way.

Also, Read  Remote Control Codes for Panasonic DVD

Step 2: Hold your universal remote to face the device you
wish to program.

Step 3: Find the ‘PROG’ option on your universal remote.  Hold on to the button until the tiny LED light on your remote lights up. Press on to the ‘INFO’ button.

Step 4: If you get the first three steps right, you will notice the tiny LED light will continue to blink.

Step 5: Find the correct code below that applies to your device and enter. Your DVD will show ‘Success’ once you get the correct code. If not, try another code. On the other hand, your DVD will display ‘Sorry’ if you enter an incorrect code. Repeat the process with another code.

Step 6: Press any of the functions keys on your remote control. If it works, that means you got the steps correctly. If it doesn’t work, repeat the steps and try with another code.

How to set Universal Remote to DVD Player using codes

The first method to program your universal remote to your DVD has been explained earlier. If the method does work, you can make use of this alternative method.

Step 1: Find the PROG button on your remote control and press down until you see a tiny LED light.

Step 2: Choose the ‘DVD’ option

Step 3: Find the correct DVD code for your DVD player above and enter in the space for codes.

Step 4: If the light goes off when you enter the code, it shows you got the correct code.

How to check if a Sony Remote is a Universal Remote

Some DVD remotes that come with some DVD players are universal remotes. Meaning you can use the remote to power other gadgets besides DVD player. To check if your DVD remote is a universal remote, check if has the ‘Set’ and ‘Mode’ options. If it does, it is a universal remote.

If you have any code that is not included in these, please help us add it to the comment box. We will really appreciate it.

Check out other categories to find universal remotes codes for different brands of your gadgets.

The post 3-digits Universal Remote control codes for DVD Players appeared first on My Universal Remote Tips And Codes.

When it comes to list of good quality DVD players in the market, the Philips brand is counted amongst the top 5. A Philips DVD player usually comes with remote control. However if for any reason you misplace your Philips DVD player’s remote or it got spoilt, you can use a universal remote to program your DVD.

For you to use a universal remote to program your Philips DVD player, you need the Philips DVD Player Remote Codes. The code is usually a 4 number code. A good number of remote codes for PHILIPS DVD player listed below. In fact, we listed more than one code. So if one of the codes doesn’t work, please try out another code.

After you get the code, you need to know how to sync your universal remote control to work with your PHILIPS DVD before you can use the code. The guide on how to program a PHILIPS DVD with a universal remote control has also been outlined below.

How to program Universal Remote Control to PHILIPS DVD Player

Step 1: Switch on your PHILIPS DVD set. Check to ensure the DTA is on and that it is installed the correct way.

Also Read  Remote Control Codes for Panasonic DVD

Step 2: Hold your universal DVD remote to face the device you
wish to program.

Step 3: Find the ‘PROG’ option on your universal remote.  Hold on to the button until the tiny LED light on your remote lights up. Press on to the ‘INFO’ button.

Step 4: If you get the first three steps right, you will notice the tiny LED light will continue to blink.

Step 5: Find the correct code below that applies to your device and enter. Your DVD will show ‘Success’ once you get the correct code. If not, try another code. On the other hand, your DVD will display ‘Sorry’ if you enter an incorrect code. Repeat the process with another code.

Step 6: Press any of the functions keys on your remote control. If it works, that means you got the steps correctly. If it doesn’t work, repeat the steps and try with another code.

4 digits Universal Remote codes for PHILIPS DVD Player

• 0885
• 2033
• 0503
• 2318
• 2404
• 2051
• 2109
• 2091
• 2033
• 1911
• 1914
• 0646
• 2302
• 2318
• 2243

3 digits Universal Remote Codes for PHILIPS DVD Player

• 755
• 400
• 370
• 891
• 408
• 437
• 370
• 387
• 362
• 398
• 423

How to setup codes for PHILIPS DVD Universal Remote Codes

The first method to program your universal remote to your PHILIPS DVD has been explained earlier. If the method does work, you can make use of this alternative method.

Step 1: Find the PROG button on your remote control and press down until you see a tiny LED light.

Step 2: Choose the ‘DVD’ option

Step 3: Find the correct DVD code for PHILIPS DVD above and enter in the space for codes.

Step 4: If the light goes off when you enter the code, it shows you got the correct code.

How to check if a PHILIPS Remote is a Universal Remote

Some DVD remotes that come with some PHILIPS DVDs are universal remotes. Meaning you can use the remote to power other gadgets besides PHILIPS DVD. To check if your PHILIPS remote is a universal remote, check if has the ‘Set’ and ‘Mode’ options. If it does, it is a universal remote.

If you have any code that is not included in these, please help us add it to the comment box. We will really appreciate it.

Check out other categories to find universal remotes codes for different brands of your gadgets.

The post Philips DVD Player Universal Remote codes and setup appeared first on My Universal Remote Tips And Codes.

LG is one of the popular DVD brands in the market. Usually, an LG DVD player comes with remote control. But if for any reason you misplace your LG DVD player’s remote or it got spoilt, you can use a universal remote to program your DVD.

To use a universal remote to program your LG DVD player, need the LG DVD Player Remote Codes. This post outlines the codes below. There are a number of remote codes for LG DVD player listed below. More than one code has been provided for each device. So if one of the codes doesn’t work, please try out another code. The code is usually a 4-digits numbers.

After you get the code, you need to know how to sync your universal remote control to work with your LG DVD before you can use the code. The guide on how to program an LG DVD with a universal remote control has also been outlined below.

4 Digits LG DVD Player Remote Control Codes

• 2371
• 2352
• 2297
• 2039
• 1983
• 0571
• 0741
• 0591
• 2339
• 2270
• 2368
• 0869
• 0801
• 0591
• 2303

How To Program Universal Remote Control To LG DVD Player

Step 1: Switch on your LG DVD set. Check to ensure the DTA is on and that it is installed the correct way.

Also Read  Remote Control Codes for Panasonic DVD

Step 2: Hold your universal DVD remote to face the device you
wish to program.

Step 3: Find the ‘PROG’ option on your universal remote.  Hold on to the button until the tiny LED light on your remote lights up. Press on to the ‘INFO’ button.

Step 4: If you get the first three steps right, you will notice the tiny LED light will continue to blink.

Step 5: Find the correct code below that applies to your device and enter. Your DVD will show ‘Success’ once you get the correct code. If not, try another code. On the other hand, your DVD will display ‘Sorry’ if you enter an incorrect code. Repeat the process with another code.

Step 6: Press any of the functions keys on your remote control. If it works, that means you got the steps correctly. If it doesn’t work, repeat the steps and try with another code.

How To Set Up Codes For LG DVD Universal Remote Codes (Alternative Method)

The first method to program your universal remote to your LG DVD has been explained earlier. If the method does work, you can make use of this alternative method.

Step 1: Find the PROG button on your remove control and press down until you see a tiny LED light.

Step 2: Choose the ‘DVD’ option

Step 3: Find the correct DVD code for LG DVD above and enter in the space for codes.

Step 4: If the light goes off when you enter the code, it shows you got the correct code.

How To Check If an LG Remote Is a Universal Remote

Some DVD remotes that come with some LG DVDs are universal remotes. Meaning you can use the remote to power other gadgets besides LG DVD. To check if your LG remote is a universal remote, check if has the ‘Set’ and ‘Mode’ options. If it does, it is a universal remote.

If you have any code that is not included in these, please help us add it to the comment box. We will really appreciate it.

Check out other categories to find universal remotes codes for different brands of your gadgets.

The post LG DVD Player Remote Control Codes appeared first on My Universal Remote Tips And Codes.

Magnavox is one of the popular DVD player brands in the market. Usually, a Magnavox DVD player comes with remote control. But if for any reason you misplace your Magnavox DVD player’s remote or it got spoilt, you can use a universal remote to program your DVD.

To use a universal remote to program your Magnavox DVD player, need the Magnavox DVD Player Remote Codes. This post outlines the codes below. There are a number of remote codes for Magnavox DVD player listed below. More than one code has been provided for each device. So if one of the codes doesn’t work, please try out another code. The code is usually a 4-digits number.

After you get the code, you need to know how to sync your universal remote control to work with your Magnavox DVD before you can use the code. The guide on how to program a Magnavox DVD with a universal remote control has also been outlined below.

How to program Universal Remote control to Magnavox DVD Player

Step 1: Switch on your Magnavox DVD set. Check to ensure the DTA is on and that it is installed the correct way.

Also Read  Remote Control Codes for Panasonic DVD

Step 2: Hold your universal DVD remote to face the device you
wish to program.

Step 3: Find the ‘PROG’ option on your universal remote.  Hold on to the button until the tiny LED light on your remote lights up. Press on to the ‘INFO’ button.

Step 4: If you get the first three steps right, you will notice the tiny LED light will continue to blink.

Step 5: Find the correct code below that applies to your device and enter. Your DVD will show ‘Success’ once you get the correct code. If not, try another code. On the other hand, your DVD will display ‘Sorry’ if you enter an incorrect code. Repeat the process with another code.

Step 6: Press any of the functions keys on your remote control. If it works, that means you got the steps correctly. If it doesn’t work, repeat the steps and try with another code.

3 digits Magnavox DVD Player Remote Control codes

• 162

4 digits Magnavox DVD Player Remote Control codes

• 0408
• 0456
• 0915
• 0918
• 0979
• 0980
• 0914
• 0969

How to setup codes for Magnavox DVD Universal Remote codes

The first method to program your universal remote to your Magnavox DVD has been explained earlier. If the method does work, you can make use of this alternative method.

Step 1: Find the PROG button on your remote control and press down until you see a tiny LED light.

Step 2: Choose the ‘DVD’ option

Step 3: Find the correct DVD code for Magnavox DVD above and enter in the space for codes.

Step 4: If the light goes off when you enter the code, it shows you got the correct code.

How to check if a Magnavox Remote is a Universal Remote

Some DVD remotes that come with some Magnavox DVDs are universal remotes. Meaning you can use the remote to power other gadgets besides Magnavox DVD. To check if your Magnavox remote is a universal remote, check if has the ‘Set’ and ‘Mode’ options. If it does, it is a universal remote.

If you have any code that is not included in these, please help us add it to the comment box. We will really appreciate it.

Check out other categories to find universal remotes codes for different brands of your gadgets.

The post Magnavox DVD Player Remote control codes appeared first on My Universal Remote Tips And Codes.

The Toshiba DVD player is one of the popular DVD player brands out there. Usually, a Toshiba DVD player comes with remote control. But if for any reason you can’t control your DVD player with the remote, you can use a universal remote to program the DVD player.

One thing you need to know is there, for you to sync a Toshiba DVD player with a universal remote, you will need the Toshiba DVD player universal remote codes. This post outlines the codes below. There are a number of remote control codes for TOSHIBA DVD player listed below. We provided more than one code for each device. So if one of the codes doesn’t work, please try out another code. The code is usually a 4-digits figure.

Also, this post provides The guide on how to program a Toshiba DVD player to a universal remote control has also been outlined below.

3 digits Universal Remote codes for Toshiba DVD Player

• 902
• 512
• 513
• 506
• 510
• 112
• 313
• 419
• 413

How to program Universal Remote control for Toshiba DVD Player

Step 1: Switch on your TOSHIBA DVD player set.

Step 2: Hold your universal remote to face your TOSHIBA DVD player you wish to program.

Step 3: Find the ‘Menu’ option on your universal remote.  Press on to the ‘Settings’ button and ‘Program Remote’ then choose ‘DVD’ or any device you wish to program.

Step 4: If you got the process right, the tiny light will blink 4 times. When it does, pick any of the codes above for your device and enter. The button light will go off once you get the correct code. If not, try another code.

Step 5: Press any of the functions keys on your remote control. If it works, that means you got the steps correctly. If it doesn’t work, repeat the steps and try with another code.

How to setup codes for Toshiba DVD Player Universal Remote codes

The first method to program your universal remote to your Toshiba DVD player has been explained earlier. If the method does work, you can make use of this alternative method.

Step 1: Find the PROG button on your remote control and press down until you see a tiny LED light.

Step 2: Choose the ‘ DVD’ option

Step 3: Find the correct DVD code for Toshiba DVD above and enter in the space for codes.

Step 4: If the light goes off when you enter the code, it shows you got the correct code.

How to check if a Toshiba Remote is a Universal Remote

Some DVD players remotes that come with some Toshiba DVD players are universal remotes. Meaning you can use the remote to power other gadgets besides Toshiba DVD player. To check if your Toshiba remote is a universal remote, check if has the ‘Set’ and ‘Mode’ options. If it does, it is a universal remote.

If you have any code that is not included in these, please help us add it to the comment box. We will really appreciate it.

Check out other categories to find universal remotes codes for different brands of your gadgets.

The post Toshiba DVD Player Universal Remote control codes appeared first on My Universal Remote Tips And Codes.