Hisense makes some of the best Smart TVs on the market. It’s easy to find a TV that meets your viewing preferences, whether it’s a Laser TV or a Premium ULED or UHD set. However, this article will discuss Hisense Smart TV picture problems and their simplest solutions.

As with all Smart TVs, Hisense TVs also have a host of picture problems that require thorough troubleshooting to find the cause and fix it quickly.

Sometimes, you may experience screen display issues, or the backlight may stop working. In order to find the solutions to the various picture problems, you need to go through the recommended Hisense TV troubleshooting steps.

Note: It is not always easy to fix your Hisense Smart TV problems. Physical problems with your Hisense TV may require professional repair.

Hisense customer service should be contacted first, especially if the product is still under warranty.

However, if you are in the position to fix Hisense TV picture problems, then you should do so while ensuring that you will not void the warranty.

Troubleshooting Hisense Smart TV – List of common issues and solutions

Follow the steps below to troubleshoot the Hisense TV problems:

• Hisense Smart TV won’t turn on

If your Hisense Smart TV won’t turn on, the first thing to do is to check if it has a power problem. There may be a problem with the power supply that needs to be fixed.

Try plugging it into a different AC outlet.

There are several ways to fix this issue. Here are a few:

1. Disconnect the TV from the power source or wall plug.
2. Please wait about 60 seconds.
3. Plug it back in after 60 seconds.

The hardware can be reset by unplugging it and plugging it back in. If that does not fix the Hisense TV problem, try the following fix.

1. Remove the batteries from the remote control.
2. Press and hold the power button for 15 seconds.
3. Replace the batteries in the remote control.
4. Turn on the TV with the remote control.

If the above resolves the problem, you will need to factory reset your Hisense Smart TV, but it returns a day or a week later. Here is how:

• Navigate to the Settings page.
• Choose a system.
• Select Advanced System Settings.
• Choose Factory Reset.

By following the steps above, all the settings on your Hisense smart TV will be reset, and many other picture problems will be resolved.

• Hisense Smart TV screen keeps flickering.

One of the many picture problems you will encounter with the Hisense TV is flickering. The device can be fixed by turning it off and on repeatedly.

It may not always happen, especially if an attached component on the device is malfunctioning.

Additionally, unsecured cables and other features on your TV may be to blame. Occasionally, it can be caused by incorrect TV settings, signal interference, or electronic interference.

These Hisense Smart TV troubleshooting steps will help you identify the problem and fix it.

• You may have an interfering source nearby. Appliances, electric tools, mobile phones, or even a fan are all possible sources. Try moving them away from the TV and see if that helps.
• To prevent interference, plug the TV’s power cord into a different outlet.

You can also try turning off the Energy Saving feature of the TV as a troubleshooting step. Follow these steps:

1. Using your remote control, go to Settings.
2. Under Picture Mode, the TV will be set to Energy Saving.
3. The TV will be set to Energy Saving under Picture Mode.
4. Choose a picture mode.
5. You will see a list of seven options.

As a result, you can experiment with any of those seven options to find one that fixes the flickering. You can also try a hard reset on your TV to see if that helps.

Also, some flickering picture problems on Hisense TV can be caused by a failed mainboard. Under warranty, it can be fixed, or you can hire a professional to do it for you. However, if you possess the skills, consider replacing them.

• Troubleshooting the brightness problem

Depending on the content you are watching, you may need to adjust your TV’s picture settings manually. To do this:

1. On your remote control, press the Settings button.
2. A side menu will appear.
3. To bring up the full menu options, press the right directional key.
4. Choose a picture mode.

You will learn how to reset a Hisense TV and what will happen and how it can help.

In Picture Mode, you must adjust various settings to determine the right brightness level. Generally, you can optimize your picture settings by making sure the following values are present:

• Picture Mode – Theatre Night
• Colour – 49
• Backlight – 52
• Colour Space – Auto
• Contrast – 47
• Brightness – 51
• HDMI Dynamic Range – Auto (not adjustable)
• Colour Temperature – Low
• Gamma – 2
• Sharpness – 0
• Tint – 0
• HDMI 2.0 format – Enhanced
• Local Dimming – High

Make sure all other settings are set to OFF or zero. Let the RGB colour sub controls default to their default settings. In addition, most of these devices come with preset brightness and colour settings.

You can modify the settings to make an image appear the way you want it to. When you switch between presets, your TV’s brightness can be adjusted depending on the content you are watching.

In the event that the above does not work, reset your TV to factory settings.

• Hisense Smart TV blinking codes

There may be times when the red LED on your Hisense Smart TV blinks several times. The problem is often not a software issue but rather a hardware one. The first step in trying to fix it is to power cycle the TV.

1. On the device, press the power button.
2. Disconnect it from the power source.
3. Please wait 30 seconds
4. Connect the power cord and turn on the device.

Are these steps effective? If not, then you have a hardware issue.

1. However, if the red LED blinks six times, the backlight or a failing mainboard, inverter board, or power board might be the issue.
2. If the red LED blinks four times, there could be a problem with the main logic board or inverter board wires.

You can start by contacting Hisense Customer Support for further troubleshooting and repair. Contact a professional if your warranty has expired.

• Hisense Smart TV screen went black.

You will not be able to see any picture or background on your Hisense Smart TV when it goes black. However, you can hear what is playing when you change channels.

Here’s how you can fix the Hisense smart TV picture problems.

1. Disconnect the power cord from the TV.
2. Hold the power button for 20 seconds.
3. Leave the TV unplugged for about two minutes.
4. Reconnect the power cord.
5. Restart the TV.

The above procedure is necessary to determine whether a simple reset will solve the problem. If that doesn’t work, you have an issue with the hardware.

The mainboard, power board, or LEDs may be defective. Contact professional or Hisense customer support to help you if that is the case.

• Hisense Smart TV shows pictures with no sound problem.

You can fix this issue in two ways:

1. Make sure the volume is not set to zero.
2. Make sure the Mute mode is turned on.

Once you have determined the cause, could you fix it? Reset your TV by doing a power cycle if it does not work.

• The Hisense TV turns on then off immediately.

Hisense Smart TVs sometimes turn on but show no pictures, and then they turn off immediately. A variety of factors can cause the issue. You can try the following:

1. Remove the batteries from the remote control. Your remote control may be pressing keys without your knowledge. Check to see if it offers a solution.
2. Unplug the device from the main supply and try a hard reset. Plug it back in after about 15 minutes. Restart your TV and see if the problem has been resolved with your Hisense TV.

Otherwise, the power supply may be to blame. An interim connection can cause this issue.

Could you make sure this is true and fix it? You can also check for loose plugs and try a different power cable or wall outlet.

• Backlight not working

After powering up your device, you will not see any image if the backlight is not working. However, you will hear sound when changing channels. You have a problem with your LED strips or the board that controls them.

You will need to replace them from the back of your TV since it is a hardware issue. It can be repaired or replaced under warranty. If you do not have a warranty, contact a professional for repairs.

Conclusion

The best way to fix the problems on your Hisense Smart TV is to troubleshoot it first. You can fix most display issues on your Hisense Smart TV by simply turning it off and on again.

You can also set the picture quality by adjusting the brightness, contrast, backlight, and colour values on your device.

However, some of these Hisense TV problems can be caused by hardware problems. Contact Hisense Customer Support or hire a professional to do it for you.

Related guides: