oCosmo TVs Remote Control Codes 

If you would like to program your ocosmo tv with the number one widespread remote then you should utilize the underneath referenced codes which are either three-digit or four-digit or five-digit codes and after that your television will be paired with the universal remote. 

ocosmo tv remote codes

Ocosmo Remote Control Codes

The Ocosmo Universal Remote 5 Digit Codes are as follows: 








Programming Ocosmo Universal Remote Without Codes 

In the auto hunt strategy, every one of the ocosmo universal remote codes is gone through checking measures in the remote. It examines each code in turn to discover the right remote code that works with your remote to program the control. Adhere to the guidelines given underneath: 

  1. Turn on the TV. 
  2. Switch on the remote and tap on the gadget button (TV, DVD, CBL, and OK/SEL) for three seconds. The LED light indicates that the TV can be started.  
  3. Point the remote towards the device and click on “CH+” & “CH-“switches. The Remote will show on/off signals. Press the “up” or “down” key. 
  4. Confirm the code by tapping on the “power” key. The gadget should turn on. On the off chance that it begins, take a stab at changing the channel to check that the remote is customized effectively.  
  5. Tap the “device” button to save the code. The LED will flicker twice for affirming the code put away. 

Programming Ocosmo Universal Remote with Manual Method 

We can program a oscomo universal remote by using the keycode and the keycode recognizes the make and model of your hardware. 

  • First, turn the device on. 
  • Then press “TV” on the Ocosmo universal remote. 
  • Now select the “Setup button” of the Universal Remote till it flashes the “Light Flash” (It means it is in Learning mode). 
  • Finally, enter the code from the programming guide. 
  • After this, point your remote at the TV and press and hold the Power button. 
  • Release the power button whenever the screen switches off. 
Also Read  Mitchell Telecom Remote Control Codes and Setup Guide

That is all, your TV will work impeccably now with the universal remote control, assuming your gadget isn’t working, attempt to rehash a similar technique with the distinctive code from a similar piece of the reference table. 

Programing Ocosmo Universal Remote with Code Search 

If you were unable to track down the key code which works for the gadget around then you can arrange your universal remote to scan mode for the right one. It’s a code in the manual which powers the remote into the hunt mode 

  • Switch on the device. 
  • Then press and hold the “Setup” button. 
  • Enter the “9-9-1” (three-digit) code. 
  • Hold down the Power button on the remote and then press the Channel up until the device turns off. 

The above strategy may take some additional time yet it is vital to track down your key code. Whenever you have done the above method your remote ought to be working for all the functions. With the above three techniques we can undoubtedly easily Program Our Ocosmo TV Device Universal Remote with universal remote codes


This article will be useful for each ocosmo universal remote control regardless of the brand, just you need to continue checking the codes until your gadget is programmed with your universal remote control.

Read More:

Leave a Reply

Your email address will not be published. Required fields are marked *