Do you need the Magnavox universal remote codes for your TV? This post outlines the codes below. There are a number of universal remote control codes for Magnavox listed below. We provided more than one code for each device. So if one of the codes doesn’t work, please try out another code. The code is usually a 4-digits figure. Magnavox is one of the popular Television brands in the market.

Usually, a Magnavox TV comes with remote control. But if for any reason you misplace your Magnavox TV remote or it got spoilt, you can use a universal remote to program the TV.

You need to know how to program your universal remote control to work with your Magnavox TV before you can use the code. The guide on how to program a Magnavox TV with a universal remote control has also been outlined below.

Magnavox Universal Remote not working

If your Magnavox universal remote control is not working, it could be as a result of some minor issues. This session will point out issues that can make your universal remote to stop working and to fix it.

Battery: If there is no battery in your universal remote or the battery is bad, it will not work. Check the battery box of your remote to ensure there the batteries are correctly fixed. Also, ensure that the batteries are not wet, because that is a sign of damage.

Object: If there is an object obstructing your TV or device you want to program, your universal remote may not function well. Ensure you remove all objects and hold your remote close to the device you wish to program.

Correct Code: Another reason your universal remote control may fail to work is if you are using the wrong code. Thankfully, this post has listed codes for all devices for your Magnavox remote. For most device, we listed more than one codes. If a code doesn’t work, simply copy the next code and try again.

You may enjoy reading Honeywell Burner Controller Fault Codes

All In One Magnavox TV Universal Remote codes

• 1060
• 1056
• 1004
• 2000
• 3211
• 1414
• 0044
• 0047
• 0022
• 0082
• 1050
• 1081

All-In-One Universal Remote codes for Magnavox Remote

You can use the above codes to control both your DVD player, TV, VCR, Cable, Home Theater, Blu-Ray and Satellite. Read down further to see the steps to program your universal remote to your Magnavox TV and Devices.

How to program Magnavox Universal Remote to TV

Step 1: Switch on your TV set you want to program.

Also Read  Remote Control Codes for Panasonic Tv

Step 2: Hold your Magnavox universal remote to face your TV or device.

Step 3: Find the ‘TV’ option on your universal remote.  Press on to the ‘Setup’ button. It remote control will enter the Learning Mode.

Step 4: Find the codes that works with your device brand using the list of code listed above.

Step 5: If you got the process right, the tiny light will blink 4 times. When it does, pick any of the codes above for your device and enter. The button light will go off once you get the correct code. If not, try another code.

Step 6: Press any of the functions keys on your remote control. If it works, that means you got the steps correctly. If it doesn’t work, repeat the steps and try with another code.

How to program Remote Control Codes For Magnavox TVs using most universal remote controls

Step 1: The TV should be turned on, and the remote should have batteries.

Step 2: For three seconds, hold the TV button and the SEL button simultaneously. There will be a light on the button.

Step 3:  Choose the appropriate code from the list below with the button lit. Point the remote at the TV and enter the TV’s three, four, or five-digit code.

Step 4:  Press the VOLUME + button to verify. The TV volume should be turned up by doing this.

Step 5: To store a code of 3, 4, or 5 digits, press the TV button. A double-blink will confirm that the code has been stored.

How to check If a Magnavox Remote is a Universal Remote

Some TV remotes that come with some Magnavox are universal remotes. Meaning you can use the remote to power other gadgets besides Magnavox TV. To check if your Magnavox remote is a universal remote, check if has the ‘Set’ and ‘Mode’ options. If it does, it is a universal remote.

If you have any code that is not included in these, please help us add it to the comment box. We will really appreciate it.

Check out other categories to find universal remotes codes for different brands of your gadgets.

How to Program Magnavox Universal Remote MC345 Without Codes

All universal remote codes are scanned by the remote during the auto search method. Using the method of how to program a ge universal remote without codes, it scans one code at a time to find out the correct remote code. Please follow the instructions below:

1. To use the universal remote, turn on a smart device such as a TV.
2. Turn on the remote, tap the device button for 3 seconds (TV, DVD, CBL, OK/SEL). LED light indicates that the device is ready for programming.
3. Simply point the remote at the device and click the “CH+” and “CH-” buttons. A signal will appear on the remote when the device is turned on or off. Keep pressing the “up” and “down” keys until the device turns off.
4. The code can be verified by clicking on the “power” key. You should be able to turn on the device. Check that the remote is programmed correctly by changing the channel if it starts.
5. You can now save the code by tapping the “device” button. The LED of the device will blink twice to confirm that the code has been stored.

You may enjoy reading Honeywell 7800 Fault Codes

How to Program Magnavox Universal Remote With Manual Method

The keycode identifies the make and model of your equipment, so we can easily program a universal remote.

• The first thing you need to do is “Turn On The Device”
• Your “Magnavox universal remote” should display “TV” as the icon
• Once it shows the “Light Flash”, the Universal Remote is in “Learning mode.”. Press and hold the “Setup button” until it shows the “Light Flash.”
•  Then enter the “Keycode” that you collected from the programmer’s guide (Instruction book).
• Following this procedure, press and hold the power button on your remote while pointing it at the TV.
• The “Power Button” can be released whenever the screen turns off

Once you have done that, your TV should now be able to be controlled by the universal remote. If it is not, try using a different code from the same section of the reference table.

How to Program Magnavox Universal Remote With Code Search

You can set your universal remote to search mode for the correct key code if you can’t find it at that time. A remote is forced into search mode by this code in manual

• The first thing you need to do is “turn on the device”
• Hold the “Setup” button for a few seconds
• The “9-9-1” code (three digits) should be entered
• In this case, press the channel up until your screen turns off while holding down the “Power Button” on the remote.

In order to find your key code, you may have to spend some extra time following the above method. The remote should now work for all the in-built functions once you have completed the above procedure.

How Does the Magnavox Universal Remote Work?

A small round button located in the upper right corner of the device is the power button, and in the upper left corner is the red indicator light. A circular pattern of five other buttons is placed below these five buttons. At the center of this pattern is a small circular mute button. First, you have to press the Channel Increase Button, which is located a little below the power button. Following that is the Volume Increase button with a right-to-left motion, then the Channel decrease button, and finally the Volume decrease button.

When you turn the remote at the back part, you will see a small circular indentation that allows you to remove the cover. The battery cover can be easily removed by turning the item over and gently pushing down on the small indent.

You may enjoy reading Five Area Codes You Should Never Answer?

Faqs

What are Magnavox Universal Remote codes?

Magnavox Universal Remote codes are a series of numbers that are used to program a universal remote to control a Magnavox television or other device.

How do I find the code for my Magnavox device?

You can find the code for your Magnavox device in the user manual for your universal remote, or by visiting the website of the universal remote manufacturer and searching for the code for your specific device.

How do I program my universal remote with a Magnavox code?

The process for programming a universal remote with a Magnavox code will vary depending on the specific remote you are using. Consult the user manual for your universal remote for instructions on how to program it with a Magnavox code.

What should I do if the code I am using is not working?

If the code you are using is not working, try searching for a different code for your device or consult the user manual for your universal remote for troubleshooting steps.

Can I use one Magnavox Universal Remote code for multiple devices?

It is possible to use one Magnavox Universal Remote code for multiple devices, but this will depend on the capabilities of your universal remote and the devices you are trying to control. Consult the user manual for your universal remote for more information.

Final Words

Programming and using Magnavox universal remote controls is easy. Magnavox MC 345 and Magnavox 348 remote controls can be programmed to any video, audio, or gaming device with the above-mentioned guide and steps.

Up to 8 devices from different brands can be controlled at once with these remotes. You can use the direct code entry method if you have the right codes for your device, or you can use the auto search method if you don’t have the right codes.

Feel free to post your question in the comments box if you still have any problems with programming. Our team is always happy to assist you.

Also read: Frigidaire Dishwasher Error Codes?