You’ll learn how to fix the Roku audio out of sync error within seconds and without any hassle in this article. The most relaxing way to unwind at the end of the day is to turn on your TV and watch your favorite shows.
I believe Roku TV is the perfect device to accomplish this, thanks to its wide selection of channels and streaming services.
I have encountered a Roku audio out of sync issue a few times in the past, which was quite frustrating.
It was not as simple as it sounds to fix the Roku audio out of sync problem. Occasionally, it would outpace the video, while other times it would lag far behind.
As a result, I couldn’t watch the show or movie I wanted to watch and it dulled the whole experience.
Searching online for a solution to the Roku audio out of sync problem, I found that it was fairly common among Roku users.
There were several simple, but scattered solutions online for the Roku audio out of sync problem.
As a result, I have created this one-stop guide to help you fix your Roku TV audio out of sync problem after reading through multiple online articles.
The purpose of this article is to provide a comprehensive explanation of how to use each of the solutions mentioned above so that you can restore your Roku TV to working order.
Try restarting your Roku TV, changing the audio settings, making sure the connections are intact, and resetting your Roku TV if the audio is out of sync.
Additionally, you can try adjusting the video refresh properties, disabling and enabling volume mode, and pressing the Star key on your Roku remote.
Table of Contents
The following techniques will help you resolve the Roku audio out of sync problem.
The importance of power cycling your Roku device cannot be overstated.
Rebooting is the most common troubleshooting step for almost any electronic device.
When the device is rebooted, any bad code that might exist within the system’s memory is removed, bringing it back to its original condition.
By unplugging your Roku device, waiting for a few seconds, and then plugging it back in, you can power cycle your Roku device.
Once the Roku device has been rebooted, your streams will start over with synchronized audio and video.
You will be required to adjust the audio settings on your Roku device to “Stereo”.
Audio lag may be caused by misconfigured settings if the previous solution didn’t fix it.
You can try to fix the most basic problem by adjusting the audio settings on your TV. You should be able to fix your issue right away by switching the audio settings to ‘Stereo’.
In order to change the audio settings to “Stereo”, we need to do the following.
- The home button on your Roku remote has to be pushed in order for it to work.
- When you scroll up or down until you find the ‘Settings’ option, you will be able to open it.
- It is very imperative that you click on the option ‘Audio’.
- The audio mode should be changed to ‘Stereo’.
- As soon as this has been done, switch HDMI mode to PCM-Stereo.
It should bring your audio back into sync once you have done this. If you have an optical port on your Roku, make sure you set the HDMI and S/PDIF options to PCM-Stereo.
All connections should be checked and ensured to be working properly.
A good chance exists that the solution mentioned previously will work the majority of the time. If it does not function properly, verify your internet connection and verify that it is reliable.
Streaming quality can be affected by poor internet strength, resulting in Roku audio out of sync problems.
Make sure the Ethernet cable connected to your TV and router is not damaged if you are using a wired internet connection.
Strong internet connections can also be achieved with the most reliable wired routers on the market.
HDMI or power cable connections that are loose can also cause issues with your TV.
Even when your Roku is not working, this solution works even when it goes undetected most of the time.
The HDMI and power cables need to be connected to the TV in order to prevent problems.
Roku audio out of sync can be fixed by disabling and enabling Volume Mode on the remote control.
Many users have found success by changing the volume settings on the remote quickly.
There is no doubt that this seems too simple to be true, but it has proven quite effective over the years.
You just have to deactivate and re-enable the ‘Volume Mode’ on your remote control.
Follow these steps to accomplish this.
- You can do this by simply clicking on the star or asterisk (*) button.
- The volume mode can be found by scrolling down.
- By scrolling right, you will be given the option to select OFF.
You will most certainly need to use the star (*) key on the remote.
The Audio Levelling setting on Roku can also be changed to quickly fix out of sync audio.
In order to pause your TV’s playback while it is still playing, you should push the Star (*) key on your remote. The volume settings can be accessed by pressing the star key on your remote while your TV is playing.
Your audio and video should be synchronized again if you turn off the ‘Audio Leveling’ option on your device.
It might be worth trying replacing the batteries in your Roku Remote or resetting it with the Roku if it’s not working.
It is crucially important that your Roku device’s cache is cleared.
The cache memory of electronic devices can also be cleared to fix most problems.
By clearing the cache, more processing power is available, and audio lag can be fixed.
In order to get rid of this issue, it is best to reboot your device as soon as possible. It is also possible for you to clear the cache of your Roku device if you have already tried power cycling it.
- It is very imperative that you are on the ‘Home’ tab of the main menu.
- You should press the following buttons consecutively on your remote control.
- For you to accomplish this, you simply have to press the Home button approximately five times.
- There is only one time that you need to press the Up button.
- Then press the Rewind button twice in a row.
- Press Fast Forward a second time if you want to proceed.
- There will be a delay of approximately fifteen to thirty seconds before the device clears the cache, and then it will restart.
It appears that there is a technical glitch with your Roku device and it needs to be reset.
You can reset your Roku device to its factory defaults if none of the above solutions work for you.
However, you must remember that you will lose all the settings and customizations you have made.
In order to reset your Roku device, follow these steps.
- It is easy to do this by pushing the Home button on the Roku remote control.
- It is quite easy to access Settings by scrolling up or down.
- You can access Advanced System Settings by selecting System.
- The factory reset option should be selected.
- Roku TVs can be reset by selecting Factory Reset Everything.
- Reset your device by following the outlined steps that appear on the screen.
Conclusion
There is no doubt that audio out of sync is one of the most common problems encountered by Roku users. In the article above, it is described how to fix the Roku audio out of sync problem.
In the event that none of the above solutions work, you can get in touch with Roku Customer Support.
You will be able to receive better assistance from the support team if you mention all the troubleshooting steps you have taken so far.
If your warranty is still active, you may receive a replacement device.
Ensure that your soundbar or AVR is HDMI 2.0 compatible when troubleshooting your Roku audio out of sync.
Otherwise, you will have issues like this in the future. Occasionally, a simple forward-rewind action can also fix the Roku audio out of sync problem.
FAQs
Is there audio output on Roku?
There is an optical digital audio output on the Roku TV that can be used to connect an external speaker or a sound bar to the TV.
What is the best way to connect Roku to external speakers?
It is conceivable to connect your Roku device to an external speaker using either HDMI or optical cables.
If you prefer, you can connect your Roku via Bluetooth speaker using the Roku app on your smartphone.
Since Bluetooth on Roku isn’t as straightforward as it seems, here’s how to do it.
What is the most convenient technique to control my Roku soundbar?
Go to Settings and select Audio, then select Audio Preferences and choose Audio Mode on your TV.
Choose Auto (DTS) and Next, then return to the Audio menu, select S/PDIF, and select Auto-Detect.
ARC should also be set to Auto-Detect in the Audio menu, once you return to it.
Finally, go back to Settings, open the System menu, select CEC, and select HDMI.
Is Roku capable of streaming HD audio?
Roku Express and Roku Ultra stream HD and 4K video and audio, respectively, and Roku can stream HD audio.
Read More: