Roku Remote Volume Not Working? – Instant Ways To Fix It

Due to its ability to let you enjoy smart TV features on a non-smart TV, Roku has gained a lot of traction in recent years. The thumb drive-like device can be used to cast media, stream media online, browse the internet, and more. Many people, however, might encounter a very common problem: Roku remote volume not working, so how can we fix it?

My first Roku device was purchased almost a year ago, and I am still enjoying it today, and it has been working seamlessly for me ever since then. A recent firmware upgrade caused a problem for my Roku remote, the volume rocker was not working.

Since I hadn’t experienced this issue for almost a year, I didn’t know how to fix Roku remote volume not working. It was only natural for me to hop on the internet and search for a possible solution to my problem.

It was a great relief to learn that my Roku remote worked fine and that it did not have any hardware issues. I spent several time trying to identify the root cause of Roku remote volume not working.

To help you save time and effort, I have listed the possible issues that can cause Roku remote volume not working and their solutions.

You may need to change the remote codes if the remote volume is not working on Roku. Check the compatibility of your Roku-connected devices and re-run the remote setup if that doesn’t work.


It is recommended to re-run the Configuration of Remote Control via TV to resolve the Roku Remote Volume Not Working Issue.

In the case of a Roku stick, you might have changed the settings because of a firmware update.

Also Read  Tuner or HDD Unavailable Error on Spectrum? - A Complete Guide

It is possible to resolve the Roku Remote Volume Not Working issue by performing remote configuration in the control settings. Follow these steps to rerun the setup:

  1. The Roku device needs to be turned on.
  2. As you can see, there is a Settings tab on the main page, you can access it by tapping on it.
  3. It’ll be required for you to tap on “Remotes & Devices”.
  4. Then tap on the “Remotes”
  5. Then choose the “Gaming Remote” tab from the menu.
  6. You will need to tap the “Set Up Remote for TV Control” tab.

It could take up to a minute for the setup process to complete, and then it asks if you hear the music after that. Furthermore, the system will also ask you if you would like to increase or decrease the volume of the sound as well.


You probably need to re-pair the remote to resolve the Roku Remote Volume Not Working problem.

You may want to try unpairing the device and re-pairing it if this method does not work for you. Follow these steps to unpair the Roku remote:

  1. The Home, Back, and Pairing buttons should be held simultaneously.
  2. The LED indicator should blink three times after you press the button.
  3. You can unpair the Roku remote by pressing a few buttons randomly.

Following are the steps to re-pair the Roku remote with the device.

  1. It is advised that the Roku device be turned off.
  2. The remote control’s batteries need to be removed.
  3. There is a requirement that the Roku device must be turned on.
  4. When the homepage appears, replace the remote’s batteries.
  5. Press the pairing button to pair the device.
  6. When the LED light starts flickering, keep pressing.

In this case, the pairing process will begin; the process might take a few seconds.


There are different setup codes that can be used to fix the Roku Remote Volume Not Working Issue.

There is a different set of remote codes for every TV model on the market. Roku narrows down possible codes for your specific TV brand during setup so you can program the enhanced remote.

Also Read  Durand TV Universal Remote Codes

It is important to note that the system only selects codes that are programmed to control either volume or power, not both. By using an alternative code for the TV brand, you can fix Roku Remote Volume Not Working.

Using your enhanced Roku remote, you can try additional codes as follows:

  1. Using the main home page, select “Remotes & Devices” from the Settings menu.
  2. Simply click “Set Up Remote for TV Control” under “Remotes” and then “Gaming Remote”.
  3. You will be asked if you hear the music when you are setting up the event.
  4. As soon as this happens, the player will prompt, “Did the music stop”? Instead of answering, turn up the volume until the music resumes.
  5. You can then proceed to the next remote code if you answer the question with ‘No’.
  6. Answer ‘Yes’ when asked about the music stopping this time.

This new code can now be programmed into the Roku Enhanced Remote. If you do not find a code that controls both volume and power, repeat the process a few times.


Connect your Roku device to a device that supports HDMI and audio.

Several TV models are not supported by the Roku system, but most devices are. The Roku Streaming Stick®+ and Roku Streambar, as well as other Roku streaming players, work with HDMI-equipped TVs


It is necessary to connect your Roku player to a compatible television to take advantage of features such as 4K Ultra HD or HDR.

Having a Roku device that supports your TV is a good thing, but the remote volume rocker is still not working. It is possible to connect TVs with resolutions as high as 720p and 1080p with the High-Speed HDMI Cable.

In addition, the Roku device should not be touched by any electronic device or television.


Check If The Remote Is Overheating as it may cause Roku remote volume not working error.

It has been reported that Roku remotes can malfunction due to overheating. If your Roku remote feels hot to the touch, then you should stop using it and allow it to cool down. However, if the volume rocker is not operating properly, then overheating is likely to be the cause.

Also Read  Furrion TV Universal Remote control codes

If you place the remote on a hard, non-flammable surface like marble or tile, it will cool down faster. The batteries of a remote control that is hot should not be removed.


Make sure you get the Roku Controller app for your device.

Make sure your Roku remote’s hardware is working properly. If you install the Roku controller app, you can change the volume.

It is also worth mentioning that the Roku companion app comes with a built-in remote control. It can replace a physical remote for controlling streaming devices.

The Roku app can be downloaded and connected to your device in just a few steps. You’ll get an enhanced Roku remote that you can control from anywhere.

You might have to replace your Roku remote if the volume controls do not work properly.


The Roku remote needs to be replaced with a new one.

If you are unable to use any of the methods mentioned above, it might be due to a malfunction in your remote. Further, if the Roku Remote Volume Not Working problem persists after your Roku remote has been dropped or water damaged, you may have to buy a new one.


To fix the volume not working issue, the Roku Remote must be reset.

If your Roku device is not working properly and the remote is malfunctioning, you may need to reset it. Your passwords will be lost, as well as the settings you have configured. However, it usually refreshes the system in most cases.

A firmware update can sometimes cause a system glitch or a bug, which prevents it from functioning properly. The Roku companion app or the settings on your Roku can be used to reset your device.

You should also ensure that the Roku remote and the device are connected to a strong WiFi network. Roku devices and remotes cannot function properly without WiFi signals.



Is the remote for Roku missing a volume button?

There is usually a volume rocker located on the side of the remote control of the Roku device.


What is the most effective technique to modify the volume on my Roku player?

Using the Roku companion app, you will be able to adjust the volume on your Roku without having to use a remote control.


Is there a volume control in the Roku app?

I have no doubt that the volume knob on the Roku can be used to control the volume of the Roku app.


What is the procedure for syncing my Roku remote to my TV?

It is possible to sync your Roku remote to your TV with the Roku controller app that you can find on your TV.


Read More:

Leave a Reply

Your email address will not be published. Required fields are marked *