There are many reasons Why My TV Says No Signal But Everything Is Plugged In problem, including bad weather or hardware problems. When there is heavy rain, snow, or wind in your area, your cable provider or streaming service provider may display an error message. When you turn off a device, the signal regenerates in just a few seconds. Most modern satellite dishes are capable of handling extreme weather conditions.

You may also love to read: How to Fix TV Picture Flickering

When all else fails, the problem usually lies with one of the many connections of the TV, assuming there is nothing wrong with its hardware. To resolve Why My TV Says no signal on tv screenl issue without incurring excessive costs, follow the simple steps in this guide.

Why My TV Says No Signal Causing Problem?

Many TV manufacturers have an automatic connection system that detects and displays connected devices as soon as the remote is turned on. You’re dealing with network reception problems Why My TV Says No Signal, even when you’ve set your cable box to the right input or source.

If that doesn’t work, you can turn the television off, wait for a few minutes, and then turn it on again. To troubleshoot the connection individually, you will need to examine each connection one by one. Remove each connection one by one.

In order to connect a laptop/computer to an HDMI port of the TV, it is necessary to disconnect it first.

You may also love to read: How to watch movies from phone to TV without HDMI?

Windows 10 won’t connect when there’s no signal

If you try to connect your TV to Windows 10, you may get the No Signal message for numerous reasons. You can try a few things on the Windows software side of things if you have hardware-related problems, which will be covered elsewhere in this guide.

To begin, use the Win + P key combination until you reach the options to extend, duplicate or select only the second screen. The picture should appear if any of these options are selected.

The problem may be that your computer’s GPU (graphics card) and motherboard both have HDMI ports, so you have to connect the video to the right port. A GPU on a motherboard disables the HDMI port automatically if it is connected.

Sometimes you can use the right-click menu on the desktop to switch the desktop to the HDMI port, although often you’ll need to do so through the BIOS (although generally it’s better to use the GPU port, as you will be able to take advantage of your GPU’s power).

You may also love to read: Cyberflix is not working?

Check the set-top box/cable box

It is possible that your set-top box may be to blame for no-signal issues. If your provider releases a new firmware, it may be automatically updated in the background, regardless of the box you use. The new satellite settings have been uploaded, but the adjustments have still not been incorporated into the device.

The issue can be resolved by unplugging and reinserting the power cable. Before doing so, make sure that the TV is turned off. The cable box may also need to cool down after the smart card/viewing card has been removed. When removing it, take care not to press too hard. After inserting the card, follow any visible arrows as you re-embed the chip facing down.

You may also love to read: TCL Roku TV Black Screen: How to Fix?

Problems with HDMI cables/ports

A problem with the HDMI cables or the ports can usually be traced to Why My TV Says No Signal. If the connections slip out or don’t fit tightly, a slight damage can occur to the port. An experienced TV technician can easily fix it, or you can simply change the HDMI port. There are usually two HDMI ports on most modern TVs.

Connect the HDMI cable to the old or new HDMI port after disconnecting the cable. It may be suggested that you replace your HDMI cable with a self-locking one in order to make it easier to keep it in place. In no time at all, you should be able to get your TV signal working again after fixing these HDMI issues.

You may also love to read: TCL TV Black Screen: How To Fix?

HDCP Errors

It is possible for your TV to experience an HDCP error (High-Bandwidth Digital Content Protection). The intent is to prevent cable TV content from being accessed by non-licensed devices. HDCP compliance is almost a requirement for all modern TV sets.

A no-signal message will appear when you attempt to connect a Kodi box, say, to your cable TV with HDMI, especially when you have a higher-definition display. This should resolve the problem if you remove the offending device.

Other Tips

Sometimes it is necessary to change the base channel of your TV. The TV remote is usually set to 1 or 2, but sometimes it needs to be moved to 3 or 4. You need only change the remote for this change to take effect and nothing else will change.

If you are using an old cable box and TV sequence, you can reverse them. When you do this, the devices will reconnect and receive the signals again.

You may also love to read: Hisense TV Reset To The Factory Settings

An unresponsive TV can be frustrating when it displays a no-signal message. However, in most cases, you do not need to seek external assistance. Following one of the troubleshooting steps in this guide of Why My TV Says No Signal But Everything Is Plugged in can help you fix the problem yourself.