My On recommendation of me, he purchased a Roomba to help him with his busy schedule of cleaning his house.
He Roomba was convenient because he set a schedule and watched it clean his house.
I As a result of my vast experience working with Roombas, I told him to call me if he ever had a problem with his Roomba.
He After getting the Roomba, he called me several months later and asked me to check on it because it was acting strange.
So Upon checking the Roomba’s status, I found that the Error 14 had stopped working properly.
To iRobot’s support pages led to pages upon pages of information on how to fix his Roomba, as well as what Roomba Error 14 is.
You may also love to read: How Do I Know If I Have A Smart TV?
I solved the issue for my friend using the extensive documentation provided by iRobot and some friends on the Roomba user forums.
You will find a guide that you can read shortly based on the research I conducted and some trial and error from my part so that you can fix Roomba Error 14 on your own.
It is necessary to reinstall the dust collector bin if you receive error 14. Clean the Roomba of dust and grime after installing the bin, or restart or reset the robot if it still does not work after doing so.
In addition to the advanced tips I provided on how to reset your Roomba and restart it, I also covered how to reset the battery and recover lost charge cycles.
Table of Contents
What does Roomba Error 14 mean?
Automating homes is my profession
Every post I write on this blog is in response to the demands of my readers. Sign up for my mailing list to receive my most popular email offers for internet, TV, and smart home.
When Roomba displays error 14, it usually means that there was an issue detecting whether a bin has been installed.
A properly installed Roomba may not be detected, or the bin may not have been installed correctly.
Some Roomba models may also show this error code as Error 1-4.
You may also love to read: US/DS Light Blinking: How Do You Fix It?
Why does my Roomba keep giving me Error 14?
When the Roomba comes up with Error 14, it usually occurs when the dust bin has not been properly installed.
A dust collector bin installed incorrectly on your Roomba may cause the error.
It Even if you correctly installed the bin, this may sometimes happen if the Roomba fails to detect it.
Roombas that don’t have been cleaned out for a long time might produce this error since dust and grime from the floor can accumulate on the Roombas and prevent them from sensing the bin correctly.
Reinstall the Bin
If you encounter this error, the best course of action is to follow what iRobot typically recommends.
The dust collector bin should be removed and reinstalled, but this time make sure it has been installed correctly.
To remove the bin, press the button to release it.
As The Roomba Bin Error can also be handled as an alternative.
Make sure that it fits properly by placing it back in.
Replacing a damaged bin with an authentic part you can also buy from store.irobot.com is the best option if the bin has damage.
Press the Clean button on the Roomba after the bin is installed and see if Error 14 occurs again.
You may also love to read: Verizon Router Showing Red Globe
Clean the Roomba
When Roomba is cleaned, detection issues can be resolved and Roomba Error 14 can be resolved.
To clean the Roomba:
- Flip the Roomba over after it has been turned off.
- Roomba has a plastic front panel that you can remove by unscrewing the bottom.
- Use compressed air to clean the Roomba’s interior. To get to hard-to-reach areas, you can also use Q-tips.
- Screw everything back into place and reassemble the panel.
Test whether Error 14 persists by having the Roomba run its scheduled routine.
Reinstall the Battery
Your Roomba may be temporarily fixed by reinstalling its battery, which functions like a soft reset.
You’ll only need five minutes to complete this task.
Here are the steps to reinstalling your battery:
- Roomba should be flipped onto its back.
- All screws should be loosened, including the one for the brush.
- The bottom cover must be removed.
- To remove the battery, lift the two tabs on either side.
- Replacing the battery should take at least 10-15 seconds.
- Retrace your steps to reassemble everything.
You should flip the Roomba over to its proper side after closing everything out and allow it to do its cleaning.
Run it again to see if Roomba Error 14 occurs.
Reset the Battery
It is also possible to reset your Roomba’s battery if some of the battery’s charge cycles have been lost from the battery’s previous charging.
If your Roombas are of the 500 and 600 series, you need to reset the battery.
- The Clean button should be clicked.
- Holding the Spot and Dock buttons for 15 seconds and releasing them upon hearing a beep is recommended.
- If the Clean button does not turn green, leave the Roomba charging for 10 hours or until the dock is fully charged.
Using a Roomba 700 series, do the following:
- The charging dock or charging cable should be connected to the Roomba.
- After a minimum of 10 seconds of holding and pressing the Clean button, you will hear a beep after releasing the Clean button when the display says “R5T.”.
- Let the Roomba charge for 15 hours.
Check to see if Roomba Error 14 comes back when the Roomba runs through its schedule.
You may also love to read: Roku Remote Blinking Green Light
Restart the Roomba
In the case of Error 14, restarting the computer can help if it was a temporary problem with the software.
The restarting procedure is different for different Roomba models, so you should follow the steps for that model.
In order to restart a Series Roomba, follow these steps:
- Press and hold the Clean button for at least 20 seconds once the LED ring around the bin lid starts rotating clockwise.
- Turn the Roomba back on after a few minutes.
- Restart is complete when the white light goes out.
Restarting your Roomba i Series
- Hold the Clean button for at least 20 seconds when the white light around the button starts spinning clockwise.
- After turning off the Roomba, wait a few minutes for it to restart.
- Restart is complete when the white light goes out.
Roombas of the 700, 800, and 900 series can be restarted by following these steps:
- When you hear the Clean beep, press and hold the Clean button for about 10 seconds.
- After that, the Roomba will restart.
Check if the Roomba Error 14 appears again after rebooting your Roomba.
You may also love to read: Spectrum Receiver is in Limited Mode
Reset the Roomba
If You can also perform a factory reset on your Roomba if cleaning or restarting did not work.
To Before you begin, connect your Roomba to the iRobot Home app on your phone.
You can hard reset your Roomba by following these steps:
- The iRobot Home app has a setting called Factory Reset.
- The prompt should be confirmed.
- After accepting the reset prompt, the Roomba will start the factory reset procedure, so allow it to complete the reset.
If In the event that error 14 persists after the reset is completed, try running another cleaning cycle to see if the Roomba is able to get back to work.
Contact Support
If The following troubleshooting steps may not be enough to fix Roomba Error 14. You may contact iRobot customer service if you have any further questions.
If For troubleshooting tips that are more customized for your Roomba, you can get them from them.
You can also let them know whether it is necessary to send the robot in for service.
You may also love to read: LG Freezer Is Not Freezing
Final Thoughts
Make sure that it can still charge after disassembling and reassembling the robot.
The Charging error 1 can occur on your Roomba after changing or reinstalling the battery, according to reports in the online community.
If Make sure you reinstall the battery correctly if you run into this problem.
If you’re experiencing other charging issues with your Roomba, you can clean the battery charging contacts with rubbing alcohol. It will remove any dust and grime that has accumulated there.
Frequently Asked Questions
Why does my Roomba keep going backwards?
It is sometimes the case that a jammed or blocked front wheel causes your Roomba to go backwards. The Roomba will try to move backward to clear a jammed wheel if it is jammed in the forward direction.
What does Roomba flash clean mean?
If your Roomba’s Clean button flashes, it means that its software is being updated when it is at home.
Is there a recommended run time for my Roomba?
iRobot recommends that the Roomba be run for its entire cleaning cycle based on the schedule you set. This may take 20-40 minutes, depending on the size of your home.
Is Roomba capable of memorizing your house?
The advanced sensors of the robot map your home’s layout using the advanced sensors on its front. After this map has been uploaded, the Roomba cleans your house at predetermined intervals.
