How To Program Time Warner Remote

The Time Warner remote for Cable box also doubles as a universal remote control. This means that besides your Cable box, you can use the same remote for your TV, DVD player and other electronic devices in your home. Before you read further, check out this other post for the Time Warner remote codes, you will need it for the process.

How To Program Time Warner Remote To TV

Step 1. Ensure you turn on your TV.

Step 2. Hold your Time Warner remote close to the TV set you want to program.

Step 3. Find the Select/Ok button on your remote. Hold down the button simultaneously with the TV button. Release the button when the tiny LED light blinks twice.

Step 4. Key in the four digits code you got from earlier using the number keys on your remote control. When you get the correct code, all the component buttons on your remote will blink thrice. If not, try the next code on the list.

Step 5. Test your remote by pressing the Power button. If your TV turns off, it means you got the process correctly. You can also try this step with the Volume button.

How To Program Time Warner Remote To DVD Player

Step 1. Ensure you turn on your DVD Player.

Step 2. Hold your Time Warner remote close to the DVD Player you want to program.

Step 3. Find the Select/Ok button on your remote. Hold down the button simultaneously with the DVD button. Release the button when the tiny LED light blinks twice.

Also Read  How To Program Altice Remote To TV

Step 4. Key in the four digits code you got from earlier using the number keys on your remote control. When you get the correct code, all the component buttons on your remote will blink thrice. If not, try the next code on the list.

Step 5. Test your remote by pressing the Power button. If your DVD Player turns off, it means you got the process correctly. You can also try this step with the Volume button.

How To Reset Your Time Warner Remote To Factory Settings

You may want to reset your remote to factory settings for a number of reasons. Follow the steps below to do that.

Step 1. Press the Select/OK button on your remote. Hold down the button for a couple of minutes until the component lights blinks twice.

Step 2. Enter the following numbers 9-8-1 using the number buttons on your remote. If the component buttons blinks thrice, you got the process right.

Time Warner Remote Not Working

If your Time Warner universal remote control is not working, it could be as a result of some minor issues. This session will point out issues that can make your universal remote to stop working and to fix it.

. Battery: If there is no battery in your universal remote or the battery is bad, it will not work. Check the battery box of your remote to ensure there the batteries are correctly fixed. Also, ensure that the batteries are not wet, because that is a sign of damage.

. Object: If there is an object obstructing your TV or device you want to program, your universal remote may not function well. Ensure you remove all objects and hold your remote close to the device you wish to program.

Also Read  How to Program Motorola Universal Remote

. Correct Code: Another reason your universal remote control may fail to work is if you are using the wrong code. Thankfully, this post has listed codes for all devices for your Time Warner remote. For most device, we listed more than one codes. If a code doesn’t work, simply copy the next code and try again.

Leave a Reply

Your email address will not be published. Required fields are marked *