Hisense TV Codes – Complete Remote Programming Guide [2022]

Are you tired of having to deal with remote control issues every time you want to watch a movie? In terms of remote controls, there is no denying that most people have problems with them. As a matter of fact, there is actually a way to put an end to this problem, and that is by making use of Hisense remote codes, which is good news to hear! However, the purpose of this article is to provide you with Hisense TV remote codes and programming instructions.

It is very easy to program your device using Hisense TV Remote Codes:

These remote codes are specific to the Hisense TV brand and device type that you own. As a result, all of your remote controls are enabled to communicate with one another thanks to these codes. That’s actually very practical and effective, isn’t it? As a matter of reference, we have enumerated in this article a list of codes for your convenience. It might take a little time and patience if you are not tech-savvy, but working slowly but surely pays off. 

There will be some mistakes along the way and some repetitions, but believe me when I say, it will all be worth it in the end! Furthermore, gathering the codes before you begin the procedure would make the process easier and faster. In order to avoid interruptions during the programming process, do it during your free time.


We’ll walk you through programming your remote to your device using TV codes. 

  1. You ought to make sure that your device is switched on and that your remote is ready. It is imperative that your device is plugged in and that it is turned on prior to starting. Ensure that your remote has working batteries as well so that the procedure won’t be interrupted.
  2. To ensure that your remote captures signals and functions properly, aim it at the device.
  3. Keep your finger on the SETUP button for a couple of seconds to turn on the LED light to enable Learning Mode. 
  4. Four blinking lights will indicate that you have performed the procedure correctly. 
  5. A valid code will immediately turn off the LED light when entered using the number keys.
  6. Once the television has been turned off, press the power button again.
  7. Before you turn on your device, wait a few seconds to one minute. Confirm the functionality of some keys once you have completed the process.
  8. You may have to repeat the process or try another code from the Hisense TV codes list if it doesn’t work.

You really need to allocate enough time to this process if Hisense codes don’t work immediately. If the code is successful on the initial attempt, repeat the process on other devices.


Hisense TV Universal Remote Control Codes:

5 Digit Universal Remote Codes For Hisense TV

  • 12183
  • 11758
  • 10748


4 Digit Universal Remote Codes For Hisense TV

  • 0145
  • 1170
  • 0753
  • 0780
  • 0156
  • 0748
  • 0009
  • 0216
  • 0073
  • 0216
  • 0696
  • 0227
  • 0508
  • 0208


3 Digit Universal Remote Codes For Hisense TV

  • 765
  • 756
  • 763
  • 759
  • 764


Read More:

Leave a Reply

Your email address will not be published. Required fields are marked *