GE Dryer Not Starting? Here Are Methods To Fix It

Why My GE Dryer Is Not Starting? Common Causes and Solutions

  • Are you experiencing frustration with your GE dryer not starting?
  • If you don’t want dirty clothes to pile up on top of each other, let’s troubleshoot the problem and get your dryer running again.

One of the most common reasons for GE dryer not starting is that the cycle noises are too loud, the drive belt has broken, or the dryer is not heating up.

Or maybe the dryer is taking a nap and needs a cup of coffee to get going!


There are a myriad of causes why a GE dryer is not starting

Blown Thermal Fuse

  • In most cases a blown thermal fuse is the primary cause of an inability to start GE dryers.
  • Thermal fuse prevent your dryer from overheating by cutting off the power.
  • It is very likely that the GE dryer will not be able to start if the thermal fuse has blown.
  • If the thermal fuse is the problem, locate it on the dryer’s back and test for functionality with a multimeter.
  • Consequently, if the thermal fuse blows, it is advisable to swap it as soon as possible.


Malfunctioning Door Switch

  • Another potential cause of a GE dryer not starting is a malfunctioning door switch.
  • If the door of the dryer is open, then the door switch will prevent the dryer from running.
  • There’s a chance the dryer won’t start if the door switch is faulty.
  • Listen for a clicking sound after opening and closing the dryer door to test the door switch.
  • In the event that you do not hear any clicks, it is possible that the door switch is faulty and needs to be replaced.


Defective Start Switch

  • The start switch is another component that can prevent a GE dryer from starting.
  • If the start switch on your GE dryer is defective, it will not start when you press the start button on it. Yeah, it’s like it’s playing a game of hide and seek and it knows you can’t find it!
  • You can test the start switch with a multimeter by pressing the button and checking for resistance.
  • In the event that there is no continuity, it is likely that the start switch needs to be replaced.


Tripped Circuit Breaker

  • There is also a possibility of a tripped circuit breaker being the cause of GE dryer not starting.
  • If the circuit breaker trips, it cuts off power to the dryer.
  • The solution to this problem will be to locate and reset the circuit breaker box so that the issue can be resolved.
  • In case the problem persists, you may need to call an electrician to check for other problems that may be occurring.


Clogged Vent

  • A clogged vent can also cause a GE dryer not to start.
  • If the vent is clogged, the dryer won’t be able to properly exhaust heat, which can cause the thermal fuse to blow.
  • This issue can be resolved by finding the vent and vacuuming any lint or debris that may have accumulated in it.
  • Please make sure that you also check the exhaust duct for blockages.


Common Reasons that cause GE dryer not starting

  • A blown thermal fuse
  • A malfunctioning door switch
  • A defective start switch
  • A tripped circuit breaker
  • A clogged vent


Tips to prevent GE dryer not starting

  • Clean the lint filter before each use
  • Clean the vent and exhaust duct at least once a year
  • Don’t overload the dryer
  • Don’t use too much detergent


GE dryer not starting DIY troubleshooting tips

  • Before calling for service, check for common issues like a blown thermal fuse or a tripped circuit breaker.
  • Please refer to your device’s owner’s manual if you need specific instructions on how to troubleshoot and repair your device.
  • Make use of a multimeter to check the integrity of components such as the thermal fuse and the start switch.


When to call a professional

If you are not comfortable troubleshooting or repairing your dryer yourself, it’s best to call a professional.

A professional will have the expertise and equipment needed to properly diagnose and fix any issues with your GE dryer.

Additionally, they can help you identify any underlying problems or safety hazards.

In addition, a professional repair service will also be able to provide you with warranty and service agreements that can save you from costly repairs in the future.


Importance of regular maintenance

Regular maintenance is crucial to keep your GE dryer running smoothly and to prevent it from not starting.

Simple tasks like cleaning the lint filter, vent, and exhaust duct can go a long way in preventing issues like a clogged vent or a blown thermal fuse.

It is also important to keep the dryer in a clean and dust-free place to prevent dust and debris from getting inside the dryer.


Cost of repair

The cost of repairing a GE dryer can vary depending on the issue.

  • Replacing a thermal fuse or door switch is typically less expensive than replacing a control board or drum bearing.
  • On the other hand, it’s wise to take into account the age of your dryer as well as its overall condition.
  • You may be better off investing in a new dryer than repairing an old one in some cases.


Safety precautions

When troubleshooting and repairing your GE dryer, it’s important to take safety precautions.

  • If you are going to work on the dryer, you should always unplug it first.
  • Be aware of the location of any sharp edges or hot surfaces.
  • Use caution when handling electrical components.


Frequently asked questions

-Q: Can I fix a GE dryer not starting myself?

-A: Yes, in many cases you can troubleshoot and fix common issues like a blown thermal fuse or a clogged vent yourself. It is wise to seek advice from a professional or the owner’s manual for specific instructions and advice.


-Q: What are the signs that the thermal fuse is malfunctioning?

-A: A multimeter can be used to test for continuity on the thermal fuse, and if there is no continuity, the thermal fuse must be replaced.


Conclusion: GE Dryer Not Starting [FIXED]

A GE dryer not starting can be annoying, but with a little troubleshooting, you can often fix the issue yourself.

Remember to check for common issues like a blown thermal fuse, a malfunctioning door switch, or a clogged vent.

Regular maintenance and safety precautions can help prevent issues in the future.

It is best to call a professional if you are unsure how to troubleshoot or repair a GE dryer that is not working.



The bottom line is that a GE dryer not starting can be caused by various reasons, such as a blown thermal fuse, a malfunctioning door switch, a defective start switch, a tripped circuit breaker or a clogged vent. And if none of those are the issue, it’s probably just a case of the Mondays!

By following the steps and tips provided in this article, you’ll be able to troubleshoot and fix the problem yourself. However, if you are not comfortable doing it, it’s always best to call a professional. Remember, regular maintenance and safety precautions can prevent the GE dryer from not starting and save you from costly repairs in the future.


Read More:

Leave a Reply

Your email address will not be published. Required fields are marked *