It is quite frustrating when you have trouble with your TV remote. Being someone who has experienced something similar, I can attest to how it feels. In the event that your LG smart TV remote was not working, what would you do?

I decided to tune into my favorite show on television after a long day at work a few days ago. Having waited since morning, it was finally time for a breather. 

My LG smart TV stopped responding to the remote after I turned it on using the remote. 

The volume button was pressed, but there was no response when I pressed it. There was no change in the channel or the input source when I tried changing them. 

The remote had a few working buttons, but the majority were not relaying information to the TV. 

My first thought was that the batteries might be dead since it was such a weird problem.

In spite of this, the issue persisted even after replacing the batteries. 

As a result, I started searching the internet for solutions to my problem. My surprise was to see that many people had encountered a similar problem with LG TV remotes. 

After reading several forums and blogs, I compiled a list of some tried and tested troubleshooting methods. I had to operate the TV using the buttons on the TV because my LG smart TV remote was not working.

Whenever your LG TV is not working or is not responding to your remote control, try replacing the batteries in it. Run a power cycle on the remote and TV to eliminate temporary bugs and malfunctions. 

The TV should also be updated, interference should be checked, and a universal remote should be used.

A battery change is needed for the remote control on your LG TV.

If your LG smart TV remote is not working as it should, there is a possibility that the batteries need to be replaced.

Dying batteries can negatively affect the remote control’s functionality most of the time. 

Put the new batteries in the correct direction when replacing the old ones.

In addition, give it a couple of minutes before using the remote after adding new batteries.

Restart your LG TV remote by carrying out a power cycle on it.

Alternatively, if you are not able to fix the LG TV remote by replacing the batteries, you can perform a power cycle on it.

If there are any electrical interferences or glitches affecting the remote’s functionality, this will fix them. 

You should adhere to these guidelines when running a power cycle on your LG TV remote control.

• The remote’s batteries need to be removed.
• Two to three minutes should be enough. 
• Reinstall the batteries in the remote control. 
• Take a moment to wait. 
• The TV should be turned on and the volume should be increased. 

The light on the top should blink as soon as you press a remote control button.

It would be a worthwhile idea to power cycle your LG TV.

It is also possible that the remote control is unresponsive as a result of a glitch in your TV.

Possibly there is some interference interfering with the remote, or it could be a software issue. 

By performing a power cycle on your TV and following these steps, you can usually fix this issue.

• It is advisable to shut off the TV. 
• Ensure that the LG TV is unplugged from the power source. 
• It shouldn’t require longer than two to three minutes to accomplish this process. 
• Inspect the plug again to ensure that it’s properly inserted. 
• It may take a few minutes for the process to complete. 
• The TV should be turned on. 

Alternatively, if this does not resolve the issue and still your LG TV is not working, you can move on to the next step.

There is a need to update LG TVs as soon as possible.

There are several reasons why outdated system software can result in problems like the LG TV remote not working properly. In this case, one of the most common problems is an unresponsive LG TV remote control. 

There is a chance that an older LG TV won’t automatically update.

If you wish to manually update your LG TV, then you will have to go to the TV’s settings in order to do so. 

There is no doubt that you are wondering how you will be able to do that without a remote control. Without a remote, LG TV settings can be accessed in several ways.

 As soon as you are in the settings tab, you need to go to the system information section and check for updates. Ensure that there are no pending updates and install them if necessary.

Make sure your remote and television are not interfered with by anything.

Oftentimes, individuals don’t pay attention to obstacles blocking the remote while using it. 

The remote or the TV may be in front of other obstacles or you might be operating it from behind the sofa. 

When you press the remote button, the TV’s sensor detects the IR signal, which allows it to function properly. A TV’s bottom sensor is usually located here.

TVs cannot receive signals if something covers their IR blasters or sensor receivers. 

You should therefore check for interference before concluding that your remote is faulty.

You need to reprogramme the remote control for your LG TV.

In some cases, if you are using an LG magic remote, it might not be able to communicate with your TV if you are using it. 

You can easily fix this problem by unregistering and reprogramming the remote.

Here are the steps to follow.

• It is necessary to keep pressing the home and back buttons at the same time during which the red lights start blinking. You will be able to unregister your remote this way.
• Point the mouse pointer (or scroll wheel) at the TV while pressing the mouse pointer key. 
• There should be a pop-up message on LG TVs indicating that the remote has been registered.

It would be a good idea to try using a universal remote control for LG TVs.

It is possible to determine if the issue is with the TV or the remote by using a universal remote. 

You can pair your LG ThinQ app with your TV if you don’t have a universal remote. 

Besides the Android TV Remote, you can also install third-party remote control apps from the Play Store.

The LG Support Team is available to provide assistance to you. 

LG customer service may be able to fix your LG TV remote not working issue if these fixes didn’t fix it.

Conclusion

Problems with remote connections are fairly common, and the solutions are usually straightforward. 

An obstacle or some sort of obstruction could cause the LG TV remote to become unresponsive. 

Remotes send signals to the TV using IR blasters, so they work best at a distance.

A remote can only send signals within a 10-meter range, outside of which they cannot function properly. 

As a result, it is very important to keep this in mind when using the remote control of the television.

FAQs

How can I resolve the problem with my LG TV not responding to the remote control?

The remote’s batteries may be dead, or the TV’s sensor may be blocked by something.

In the event that my LG TV remote sensor is not working, what should I do?

It is necessary to purchase a new LG TV remote if the sensor on the remote is damaged.

What is the least-effort effective procedure to reboot my LG TV?

There is an easy way to reboot an LG TV by performing a power cycle, which is one of the best ways to do so. 

Read More: