This is what you need to do if your Maytag dryer is not heating up.

It can be very frustrating if your Maytag dryer is not heating up, especially if you need to dry your clothes as soon as possible. A Maytag dryer not heating up properly can be caused by a number of different parts being worn out or broken. The power should be turned off or the gas should be turned off before you attempt any dryer repair. The heating element for Maytag dryer may malfunction as well, but below is a simple troubleshooting guide to get it fixed.

 

You can resolve your Maytag dryer not heating issue by following these simple steps

Due to incoming power, mytag dryer is not heating

There is a possibility that your Maytag dryer is not receiving enough voltage if it is not heating. It is usually necessary to supply the electric dryer with two legs of 120 volts AC, which is equal to 240 volts. Tripped breakers or blown fuses may stop one leg of the voltage, which may prevent the dryer from heating. It is recommended that you use a multi-meter in order to measure the voltage or to check the circuit breakers. It is important to note that readings can range from 210 to 240 volts.

 

Due to the settings in the dryer, the Mytag dryer is not heating

Make sure that the controls are set properly and that they are working properly. In order to use a heat on your dryer, you shouldn’t select “Fluff Air” or “Wrinkle Prevent.”. If you select “Fluff Air,” the drum will spin and air will be blown at room temperature, not heated. With the “Wrinkle Prevent” setting, any cycle can be used, and the drum will spin after the cycle is complete, without heating up.

 

There is a clog in the exhaust vent of mytag dryer, so it is not heating

The temperature inside can rise when the exhaust vent becomes restricted, resulting in a reduction of airflow. It is possible that in the event of a high limit trip, the high limit thermostat will be tripped. As a result, regular inspections and cleaning of exhaust vents are important.

 

If these tips do not help you fix your Mytag Dryer not heating problem, appliance repair experts can help. You should contact any professional technician as soon as possible so that they can diagnose your appliance and repair it.

 

There are several possible causes of the Mytag Dryer not heating, including:

There is a fault in the thermal fuse of the Mytag dryer, so it is not heating up

Thermal fuses shut down dryer components when exhaust temperatures rise too high. The single-use device is in place for safety reasons. As a general rule, the spark plug of a dryer is located near the heat source or on the blower housing. The thermal fuse can be found inside the cabinet of your dryer if you open it up. The continuity of an electrical circuit can be tested using a multimeter. Moreover, thermal fuses are no longer useful once they blow, and it is necessary to replace them once they have blown. However, professional appliance repair technicians should handle this job for you.

 

The heating element for Maytag dryer is malfunctioning, so it is not heating

If your Maytag dryer is not heating due to a defective heating element, this could be the cause. In order to determine if the heating element for Maytag dryer has burned out, use a multimeter after opening the dryer cabinet. The heating element for Maytag dryer cannot be repaired, so it must be replaced if it no longer has continuity.

 

Maytag Dryer Troubleshooting: There is a problem with the high limit thermostat

Having a defective high limit thermostat may be the cause of your Maytag dryer not heating. Indeed, overheating of the dryer is prevented by this safety device if the exhaust vent is restricted. A heating chamber is equipped with it. To test the thermostat’s continuity, open the dryer’s cabinet and use a multimeter. If the vent system is restricted, it should be cleaned as well as replaced if there is no continuity.

 

Maytag Dryer Troubleshooting: There is a problem with the cycling thermostat

Using a cycling thermostat, you can control the temperature of the air by cycling on and off the heat. Most often, it can be found on the housing of the blower. In addition, failure of the cycling thermostat will result in the Maytag dryer not heating. Make sure that the continuity of the thermostat is checked using a multimeter. The thermostat should be replaced if it does not have continuity.

 

There is a problem with the igniter

The gas released from the gas valve is ignited by an igniter in modern gas dryers. A gas valve burner tube is located next to it inside the dryer. Additionally, you can check whether the igniter in the dryer has continuity by using a multimeter, as a malfunctioning igniter will prevent the dryer from heating. The igniter can be the source of the problem if it does not have continuity.

 

Maytag Dryer Troubleshooting: The coils are defective

Gas flows into the burner assembly through solenoid coils, which open the gas valve. However, an igniter that glows but then shuts off without creating a flame is a sign that a gas valve coil has failed.

Although we have identified the most common parts to blame for Maytag dryer not heating, other parts may also be to blame. Moreover, if you are experiencing Maytag dryer not heating issues, schedule an appointment with a professional technician as soon as possible.

 

Tips from the US Department of Energy can help you keep your dryer working for a long time:

• If you are drying towels or heavier cotton clothing, keep them separate from lighter clothing.

• Do not overdry your clothes and use a moisture sensor if your machine has one.

• Cleaning the lint screen after every load is critical to preventing fires and improving air circulation.

• Your vacuum cleaner’s long nozzle tip can be used to clean the lint screen slot in your clothes dryer.

• To finish drying your clothes with the remaining heat in the dryer, use the cool-down cycle.

• Ensure your dryer vent is not blocked periodically to save energy and prevent fires.

 

Read More: