Jensen TV remotes can work with four devices and are quite useful to get control of your entire entertainment centre. This Jensen Universal TV remote control brings with its easy application, less hassle, and one-point control for the various devices in your homes. The Jensen TV Remote Control helps you take charge of all the gadgets with one single remote. This remote mostly works on all devices and sometimes even determines the make and model of your devices. Using this remote and setting it up is a fairly simple process.
Jensen TV Remote control Codes
The Remote control codes for Jensen TVs come in five-digit codes, four-digit codes, and three-digit codes.
Three-Digit Jensen Remote control Codes
Four Digit Codes for Jensen Remote control
Five Digit Codes Jensen universal codes
Instructions for Programming Jensen TV Universal Remote
To operate the Jensen TV remote, various universal remote control codes are entered on the remote. There are different methods used to program the Jensen Universal TV remote control. These differ according to what you are trying to operate. The codes have to be changed accordingly and set according to what you want to view. The program instructions for Jensen TV remote are:
Option 1: Programming your Jensen TV remote with Auto-Search
In the auto search method, all the codes go through the scanning process. One code is scanned at a time to get to the correct code.
Step 1: Switch on the smart device that you want to operate with the remote.
Step 2: Turn on the remote and select the device button. The LED light indicates that the remote is ready to program.
Step 3: Point the remote towards the device and then click on CH+ and CH- buttons. The remote will display on and off signals. Now press the up or down key till the device switches off.
Step 4: Once the process is done, verify the code by tapping the power button. The device should switch on, and once it does, you can change the channel to make sure that the remote has been programmed right.
Step 5: Press the tap button to save the code for future use. When you do so, the LED will blink twice for accepting the code.
Option 2: Programming your Jensen TV remote with the Manual Method
By entering the key code, you can program this universal remote. Also, the key code is used in identifying the make and model of your equipment.
Step 1: Switch on the device.
Step 2: Press the TV button on your remote
Step 3: Press and hold the set up button until the light flashes.
Step 4: Now enter the key code, which you have selected from the programming guide of the device
Step 5: Now point your remote at the TV and press and hold the power button
Step 6: Finally, release the power button when the screen turns off.
If your device still does not work, repeat the same procedure with a different code from the programming guide.
Option 3: Programming your Jensen TV Remote with the Code Search Method
If you haven’t been able to find the right key code that works with your device, you can set the universal remote using the search mode method to find the right one. It’s a code in the manual that forces the remote to go into search mode.
Step 1: Turn the device on
Step 2: Press and hold the setup button.
Step 3: Enter the digits 9-9-1
Step 4: Hold down the power button and press the channel up button together until the device turns off.
This method generally takes additional time but is useful for finding the key code. Once the above functions are performed, the remote is ready to use.
How to use Jensen Universal TV Remote control
A universal remote is quite helpful in controlling your TV and other components with it. The first thing to make sure of as soon as you start is to place the batteries inside the universal remote. Next, make sure you point the remote at the TV or whichever device you are trying to control. Now try the following methods to use your Jensen TV Remote Control.
Troubleshooting steps for Jensen Remote control
Various problems can occur while using the Jensen Universal Remote control, and it is best to try troubleshooting before getting any additional help.
- The remote control stops working while performing an activity.
Start again. When you don’t press any button for 20 seconds in the programming phase, the remote will automatically shut off the programming function.
- Pressing a button on the Jensen Universal remote control, but it doesn’t do what you expect.
Point the remote towards the device you are using and make sure nothing is obstructing your path. The remote control then uses IR signals to control the receiving device. Next, check for the batteries and see that the battery is not dead. If it is, then replace the AAA batteries with fresh ones.
- The Jensen universal remote control does not work well.
Try to move your receiver to different locations and for the best results, place the receiver at a great height so that there is no IR interference from objects near the receiver.
- The Jensen Remote Control returns to the previously selected mode button every time the TV mode button is pressed.
In this case, take the remote control out of the restricted mode and start using the remote after that.
Frequently Asked Questions (FAQ)
- Will the Jensen remote control work with my infrared/IR devices?
The answer to this is yes. The Jensen Universal Remote Control comes with 2 IR blasters and can be used easily for an easy IR connection.
- If hidden behind a unit or placed inside a unit, will the remote still work?
The remote control is Bluetooth enabled and does not need a straight view or line of sight. The hub needs to receive the appropriate IR signals, but you can use a blaster to help with the process.
- How does this Jensen Universal Remote Control Work?
You command the device on what device you want to operate using the four keys, which are on top of the remote. Each mode key is associated with a certain device. In case you want the remote to operate your TV, press the TV button and so on. If you want to switch it to another device, press the mode key for the device you want to switch to.
- How do I start using the Jensen Universal Remote Control?
For using the Jensen Remote Control, install the batteries inside the remote and then visit the remote control quick reference section to understand the remote and functions it performs, with the different keys. This will help with programming your remote easily.
Program instructions for the Jensen TV remote are easy and take a few steps after which controlling all the devices is quick and easy. After trying and testing various methods, you can start using the remote without any hassles.