If you have landed on this article, you might be wondering how to boost WiFi signals through walls. It may also be helpful to use wired connections and to update the firmware of your router. However, the aim of this guide is to demonstrate how to boost WIFI signal through walls.

I’ve put together a collection of the most reliable methods based on other people’s and my own experiences to teach you how to boost WIFI signal through walls.

In case you are interested in learning how to boost your WiFi signal through walls, there are a few solutions that you can try.

1. Modifying the router position is possible.
2. Ethernet adapters are recommended.
3. Make certain that your router’s firmware is the latest version.
4. Change the frequency of a wireless network.
5. Extenders or repeaters for wireless networks.
6. Boost your internet speed with mesh WiFi.

In this article, you will be able to learn how you can boost the WIFI signal through walls if you keep reading until the end.

How To Boost Your WIFI Signal Through Walls: Five Ways You Can Do It.

There are a number of techniques that can be used to learn how to boost your WIFI signal through your wall.

Sometimes, you only need to move your router depending on the circumstances. Wireless signals are usually hindered by walls, so you’ll need to use additional networking devices.

In this section, I’ll cover the various free and paid options to learn how to boost your WIFI signal through your wall.

#1 Change the location of your router.

The signals from your wireless device can also be interfered with by obstacles other than your walls.

The signal from your WiFi may be deflected or blocked if you have metal shelving or a steel desk in your home.

When making this decision, it is also imperative to consider where your router is located.

Due to its sphere-shaped wireless signal output, you’ll want to place it centrally. There is no point in wasting space on coverage if you don’t.

This is why you will also want to place it at a higher level on a surface that is also elevated from the ground.

In spite of this, you should not put it in the kitchen or around a nursery.

Wireless signals from baby monitors and other kitchen appliances can interfere with WiFi signals. Due to their similar frequencies, they often operate at the same time.

Wireless devices and routers should be kept at least 10 feet (3 meters) away from microwaves.

#2 Obtain access to the network using an Ethernet adapter.

The following step can be skipped if you’re trying to support WIFI on devices without Ethernet ports.

I know this seems contradictory to the entire point of the post, but bear with me. Wireless signals have several weaknesses, as the title of this post indicates.

Even switching bands won’t solve your slow WiFi problem. There isn’t much distance between 5 GHz frequencies. Additionally, they have a poor ability to penetrate objects.

There is a slowdown in your speed when you use 2.4 GHz frequencies.

However, Ethernet does not face these obstacles. The wireless signal won’t be absorbed or deflected by metal objects since you’re hardwiring your internet.

In addition, these cables are capable of supporting incredible speeds.

Cat 7 cables are capable of supporting internet speeds of up to 10 Gbps. In spite of the fact that you may never need such high speeds, you are future-proofing your network setup.

Most likely, you’re here because you don’t want to drill holes in your walls or run cables through your home. Powerline and MoCA adapters are not just mentioned further down.

Ethernet connections can be extended to any room in your house using either of these devices.

I recommend using an Ethernet cable if you live in a small apartment, are staying in your house for a while, and can use Ethernet ports.

#3 Make sure your router’s firmware is up-to-date.

Wireless signals may be weaker and internet speeds may be slower due to router bugs. In order to fix these bugs, router manufacturers release firmware updates periodically.

The router needs to be logged into in order to be updated.

You can save yourself some time before you upgrade your router’s firmware. Let your router’s software update its firmware automatically and you’re likely to get errors. Manually downloading the firmware might be a good idea just in case.

You can search for “TP-Link firmware download” by typing something like that. It is possible to find the ‘Download Center’ on the manufacturer’s website if you visit its website. Download the latest version of your router by searching for your specific version.

The likelihood is fairly substantial that you will download a file known as a “.zip file”. Uncompress the firmware update file in your system’s ‘Download’ folder.

Using one of these numbers in the address bar of your browser will now allow you to log into your router.

• 0.1.1 (Apple routers)
• 168.1.1
• 168.0.1
• 168.2.1

Your credentials will need to be entered in order for you to proceed.

If you do not remember the password for your router, you can find it on the bottom of the router. You can also use a tool called Router Passwords to find out the passwords for your router. An alphabetical list of common router usernames and passwords is provided.

On the back of your router, keep your finger on the ‘Reset’ button if you have a custom user name. Your network’s configurations will be wiped clean, and your username and password will be reset to factory defaults.

Try clicking the ‘Update’ button under the ‘Firmware Update’ section of your router’s settings.

You can also upload the firmware file manually by clicking ‘Upload,’ selecting it, and then clicking ‘Open’.

It will be a necessity for you to reset your router once it has been updated. For thirty seconds, unplug your router if you still don’t have internet access after updating your firmware. By wiping your device’s short-term memory, any residual bugs will be removed.

#4 Your device must be set to a different WIFI frequency.

In most cases, a router has either a 2.4GHz or a 5GHz frequency, or both of them.

Based on our testing, the latter has never exceeded one thousand Mbps, while the former supports a maximum of four hundred Mbps. Depending on the router you use, these speeds will vary significantly. Five GHz frequencies can’t penetrate thick walls because they’re not very effective at penetrating objects.

2.4 GHz is superior to 5 GHz in terms of range and object penetration, but many other devices (such as microwaves) also use this frequency. You’ll also experience slower speeds as a result of additional interference.

Due to the lack of conflicting signals, five GHz frequencies eliminate most of these interferences. It is not supported by all routers, however.

There are only a few 802.11ax (WIFI 6) and 802.11ac (WIFI 5) routers that support it, and some 802.11n (WIFI 4) routers as well. You can check whether your WIFI network supports it by browsing your WIFI network names. Names like ‘RootBox 2.4G’ and ‘RootBox 5G’ are what you are looking for.

Log in to your WIFI account, select either band, and enter your WIFI password.

As all this back and forth is going on, what is the recommended frequency that I should be using?

You should try each band on your device using one of the many speed test tools on the internet. Compare the speeds offered by each.

There is a feature included in some routers called ‘Smart Connect’. You get the utmost benefit of both worlds by combining both frequencies into one network.

#5 Extenders and repeaters can be used to Boost WIFI Signal Through Walls.

Extending the coverage area of your wireless network is what WIFI repeaters do. However, you can learn how to boost WIFI signal through walls in a different way by using the additional methods listed below.

Your WIFI signal can be extended directly over a cable with a WIFI extender. Don’t you agree that it would be more efficient to rely on your router instead of spending money? You can expand the range of your router using these devices.

Ethernet cables are required since a direct connection is required. With Powerline and MoCA adapters, you can extend the distance of your Ethernet cable.

Repeaters amplify and rebroadcast your router’s signal instead of using Ethernet cables. When retransmitting or boosting WIFI signal through walls, these may not be as reliable as extenders.

It isn’t difficult to set up either device. Your device is ready to use once you plug it in an outlet, complete the setup through your browser, and plug it into the outlet.

Our team recently tested a bunch of extenders, so you can find out which one we recommend.

Final thoughts: How To Boost WIFI Signal Through Walls.

Depending on the materials used to construct your home, you may not be able to reach the maximum speed of your internet plan. The firmware of your router will rarely need to be updated.

Nevertheless, we hope this guide has taught you how to boost WIFI signal through walls. It is usually necessary to invest in equipment that extends your signal. It doesn’t matter whether it’s a Powerline adapter, a WIFI extender, or a new router.

Read More: