It is quite possible that there are a few things that could be responsible for the fact that your Blink camera is not recording motion detection.
There is a motion recording option on every camera device, including Blink, which toggles the feature on and off.
Motion recording on your Blink camera will not begin recording until further notice if you have not enabled it.
Whenever the respective feature of a blink camera is disabled, the camera will not be capable of recording the motion. In addition, disabling WiFi or enabling energy-saving features will result in not recording on your blink camera when motion is detected.
In addition to these solutions, there are more potential suspects as well, so let’s take a closer look at them.
Learn what else could be causing the Blink camera not recording motion and how to fix it!
Table of Contents
What Is The Reason My Blink Camera Is Not Recording Motion?
It is possible that your Blink camera is not recording motion due to a variety of factors.
In addition, WiFi connectivity, certain energy-saving features, and the charge level of your device are all factors that contribute to the issue.
Moreover, it is important to note that there are a number of possible causes for the motion detection problem.
The motion detection feature is disabled.
You must enable motion detection in your Blink camera settings otherwise, the feature will be temporarily disabled.
Problems with the battery.
There is a possibility that your camera’s batteries are worn out and need replacing, or that the charge levels are so low that motion detection is not working.
There is no arming of the blink system.
When you press a button in the Blink app, the motion sensor will be activated, and your system will be armed for intruders.
There is no WIFI.
Your camera will not be able to create videos with the motion recording feature if it is not connected to the internet.
A feature that reduces energy consumption.
Last but not least, any energy-saving features enabled through the Blink app will suppress features of your camera such as motion recording.
Moreover, these were all possible problems that could have affected the functionality of your Blink camera. Indeed, we’ll show you how to solve all of them in easy steps as we go.
What Can Be Done To Fix A Blink Camera Not Recording Motion?
Next, we will present you with a sequence of solutions that are designed to help you troubleshoot your Blink camera sequentially.
However, after each attempt at fixing your camera, make sure that you test it after applying our solutions in order.
In this article, you will find out how to fix your Blink camera motion feature not recording in easy steps.
Solution #1: Enable Motion Detection.
The first thing you need to do is make sure that the motion detection feature is enabled on your camera.
The camera will not be able to capture any motions at night or during the day if the feature is not enabled.
You can enable motion detection on your Blink camera by following these steps.
- Your smartphone should have the Blink app installed.
- It is necessary to press the “Arm System” button in the lower right corner.
- You will need to wait for your system to be armed by the application.
When your system is armed, the motion detection feature is automatically enabled.
Note: It is important to keep in mind that arming your entire system includes all your Blink devices as well.
Solution #2: Deactivate the energy-saving mode.
Your camera may not be recording motion if you have enabled any energy-saving features in the Blink app.
It would be best if you disabled any similar modes that could be responsible for the motion recording issue.
The Blink app > Settings > Power > Energy/Battery-Saving > Off and all other energy-saving modes should be turned off.
Moreover, you can disable the mode that prevents your Blink camera from recording motion events by adjusting the sliders in the respective tabs.
Note: When certain modes of this type are disabled, your camera may need to restart. Rebooting usually takes 10-15 seconds.
Solution #3: Modify motion sensitivity.
If your Blink camera is not recording motion, it may not have been able to capture any movement in the first place.
It is possible that the issue is caused by low motion sensitivity on your device.
How Does Motion Sensitivity Work?
The motion sensitivity of your Blink camera determines how sensitive your camera is to movement.
The camera will rarely capture people walking by if the sensitivity is too low, for instance. It is even possible to capture a falling leaf if the camera is set too high.
What Is The Best Way To Adjust Motion Sensitivity?
You can change the motion sensitivity of your Blink camera device by following these steps.
- Tap the settings slider on the Blink home screen to access Settings.
- You will need to select the camera that you wish to adjust.
- Please select “Sensitivity” from the drop-down menu.
- The sensitivity setting should be in the middle of the slider.
You might even start capturing your pet’s movements if you overdo motion sensitivity.
Ensure that only human movement is captured by increasing/decreasing the sensitivity.
The recommended sensitivity value is between 30 and 90. For best performance, don’t go below or above these values.
Solution # 4: Replace Blink’s batteries with new ones.
There’s a possibility that the batteries could be the cause of the problem you’re experiencing.
You should replace them to ensure that your Blink camera isn’t experiencing any power issues.
Here’s how to replace the batteries in your Blink camera.
- It’s time to take your camera down.
- Make sure your Blink camera uses two AA batteries by ejecting the back compartment.
- The batteries should be replaced with the appropriate type.
- The camera should be mounted back on the wall stand.
It’s possible that your camera’s batteries are a little larger and wider than most Blink cameras.
It would be best if you got two of the same type for replacement if that is the case.
It is important to keep in mind that the Blink mini does not require batteries and is charged via USB.
Solution #5: Do a reset on your blink camera
It might be necessary to perform a factory reset on your Blink camera if none of our solutions have worked so far.
The process for your camera will erase all software configuration information, along with any bugs and glitches.
You can reset your Blink camera in a few easy steps here.
- You should have a Blink sync module in your setup.
- Located on the rear of the device, you will need to push the reset button.
- Be sure to hold it down for 15 seconds before releasing it.
- Hold the button for a few seconds and then release it.
- It will automatically reset your camera.
You shouldn’t bother connecting the camera and resetting it separately since resetting your camera works as a connection with WiFi.
Bottom Line: Blink Camera Motion Detection Not Working? [Fixed]
Hopefully now that you know why the Blink camera is not recording motion, you were able to resolve your problem.
The motion detection feature of the Blink camera is well known for being reliable and useful. If your solutions weren’t helpful, don’t hesitate to contact Blink!
See our online technical blog under this article’s link for more similar guides and troubleshooting posts.
Read More: