Reset Digital Stream Converter Box Without Remote

A Digital Stream Converter box allows you to stream digital content on your analog television. If for any reason, your Digital Stream Converter Box stops working, you may need to reset it. Thankfully, you don’t need a remote control to do the basic rest. And this process can be done in a few minutes and your Converter box will be up and running in no time. Follow the easy steps below.

How To Reset Digital Stream Converter Box Without Remote

Step 1. Ensure you unplug your converter box and switch off your television. In some situations, you may need a pair of pliers to loosen out the converter box connection.

Step 2. Don’t plug the converter box for about 30 seconds, after that, plug it right in.

Step 3. The Converter box is programmed to automatically reset itself after it has been unplugged. So the reset process should commence at this point. This process may take several minutes to complete. So just wait it out.

Step 4. To know if the reset process is ongoing, turn on your TV, and check for the patterned lines screen.

Step 5. After the reset is complete, use your remote to scan through the channels. Once the channels are up, it means the process has been completed. You may need to input the startup information like the time.

How To Turn On Digital Stream Converter Box Without Remote

You need a remote control to turn on your Digital Stream Converter box. If for any reason, you misplace your converter box remote, check out how to turn it on without a remote.

Also Read  Spectrum Universal Remote Control Codes

Step 1. Ensure you plug in your Converter box correctly. The right way to connect it is to ensure the large end of the converter box AC adapter is plugged to an electrical socket while the small end should be connected to the back of the converter box.

Step 2. Press and hold the ‘Power’ button on your Digital Stream box.

How To Scan For Channels On A Digital Stream Converter Box

You will need to scan for channels during the initial process of setting up your Convert box. You will need the remote control that comes with your Digital Stream Converter box to do this.

Step 1. Find and press the ‘Menu’ button on your remote control.

Step 2. Choose the ‘Channel’ option from the drop-down menu.

Step 3. Pick the ‘Auto Scan’ option to find available channels.

Step 4. Click the ‘OK’ button on your remote to save the channels.

Leave a Reply

Your email address will not be published. Required fields are marked *