Vizio TV Not Turning On [Fixed in 2023]

Are you facing Vizio TV Not Turning On issue? Vizio TVs can be frustrating when they suddenly stop working. There can be a lot of expense and time involved in buying and repairing a new TV.

However, don’t be worried. There’s no need to panic if your Vizio TV Not Turning On. The scenario typically doesn’t occur due to a broken TV, but there are a few possible explanations. In most cases, getting your TV back up and running only takes a few minutes and a little troubleshooting.

How to Fix a Vizio TV Not Turning On

Vizio TV Not Turning On

The first step in troubleshooting your TV’s problem is to determine whether it is receiving power.

  • To check if your TV is in standby mode, check its standby light. In standby mode, your TV will display a red indicator light. There could be a problem with the backlight if you see the blue indicator light, but there is still a black screen. Otherwise, the TV could be on but on another input screen. A TV that doesn’t receive power for some reason won’t have a light at all.

Also, read Ge Universal Remote Codes For Vizio TV

How to troubleshoot an on-standby Vizio TV

When the standby light on your Vizio TV is on, there are a few potential reasons why it won’t turn on.

Check the Remote

It’s possible that there’s nothing wrong with your Vizio TV if you can’t turn it on with the remote. The remote might be the problem instead.

  • Batteries dying or already dead is one of the most common issues. Replace the batteries and try turning the TV on again to determine if this is the problem.
  • After removing your remote’s batteries, press and hold the Power button for 15 seconds. If you still don’t see anything, remove your remote’s batteries. Replacing the batteries after 15 seconds and turning on the TV should fix the problem.

Also, read How to Update and Install Apps On A Vizio TV

How to troubleshoot a Vizio TV with no standby light

Vizio TV Not Turning On

A lack of power may be causing the standby light on your TV to not come on, the red light in the corner that is always on.

Check the Vizio TV’s Power Source

The next logical step is to check the power.

  • Initially, you should press the Menu button to see if it gives you any results. TVs sometimes display blank screens when they are turned on. TVs and remote controls both have Menu buttons. Check whether the menu pops up by pressing both buttons simultaneously (not simultaneously).
  • Menu tests that fail indicate that the TV may indeed be off or that there is a problem with the power source. If you are unable to turn your TV on again, ensure that it is fully plugged into a power outlet.

Check the Condition of the Power Cord

Your TV often will not turn on if the cord is damaged or loose. No matter how technically savvy we are, a loose power cord can cause problems occasionally.

  • Connect both the power outlet and the TV to the cord, ensuring they are both plugged in, to ensure that it fits well. You may not notice that your TV is unplugged from its power source if the power cord is merely slightly loose. Verify that the cord is properly plugged into the outlet. If you want to make sure it’s secure, you should unplug and reconnect it. The cord can also be plugged into another outlet if that does not work.
  • Make sure the cord is securely connected to the back of the TV after checking the power outlet in the wall. It’s more common than you think to have a loose power cord connection, especially if you have kids or pets running around the TV or have a long run from the TV to the power strip. When the TV is rotated or moved, the cords can loosen as they get longer. Ensure the power cord is properly inserted and secured by unplugging the TV and plugging it back in.

A few more things you can try if the remote and power source (outlet) of the TV don’t work, are checking the TV’s power cord for damage, and inspecting the TV’s power cord.

Power Cycle Your Vizio TV

Power cycling your Vizio TV is the first thing you should try if you suspect that there are power-related problems. Your TV’s power button is used to complete the process. Is there a button on a Vizio TV? Each model or version of the phone has its own buttons on the back.

Vizio TVs can be powered off by following these steps:

  1. Be sure to unplug the cord from your TV and leave it unplugged.
  2. Find your Vizio TV’s power button on the back. The buttons are well hidden, so you’ll need to keep your eyes peeled.
  3. If your TV has a reserve energy button, press and hold it for about 10 seconds to drain it.
  4. You might want to try turning your TV back on again.

Many cases can be solved by following the preceding steps. Keep pressing the power button for at least ten seconds each time you repeat any of the procedures if they do not work the first time. You can usually get back to relaxing after doing this to fix your TV.

Also, read How to Turn Up Volume on Vizio TV Without Remote

Call Vizio Customer Support

Vizio customer support can be contacted if none of the above suggestions work. Depending on your Vizio TV model, they may provide instructions.

If you contact tech support, the problem may be fixed, but you might have other problems with your TV that need to be addressed.

Getting in touch with the Vizio customer support team over the phone or sending your TV in for repair may solve the problem.

Replace Internal Components

Troubleshooting boards to identify potential power issues is easier if you understand electronics.

When a Vizio TV doesn’t turn on, it’s usually due to a failed power supply board. Power supply boards are prone to capacitor, transistor, and diode failure.

The likely culprit of a Vizio TV that doesn’t turn on is a bad T-Con board that doesn’t supply enough power. Basically, the LCD or LED screen receives signals from the Timed Controller Board. In summary, it’s a little more complicated than that.

You should let a certified repair technician handle your Vizio TV repair if you have never disassembled a TV before. You are at risk of injury during disassembly due to the precision and detail involved! There are so many tight and fragile wire connections and high-power circuits that you could damage the TV or yourself if you make a mistake.


It is your responsibility to maintain your Vizio TV. User actions and outcomes are not the responsibility of Box20 or Electrical damage and shock may result from your actions!

Also, read How to Turn on Vizio TV Without Remote

Vizio TVs and the Power of Troubleshooting

Identifying the problem begins with knowing what the problem is—in this case, a TV that won’t turn on. In order to solve the problem, you need to identify the reasons for its occurrence. The easiest solutions are the simplest ones, so start with them and work up from there.

Is there anything else you can suggest for troubleshooting? In the comments, please let us know what you think!


Why won’t my Vizio TV turn on?

There could be several reasons why your Vizio TV won’t turn on, such as power issues, a faulty power supply, a damaged circuit board, or a software issue.

What should I do if my Vizio TV won’t turn on?

First, check the power source to ensure that the TV is plugged in and the outlet is working. Try unplugging the TV for a few minutes and then plugging it back in. If these steps don’t work, contact Vizio customer support or professional repair service for further assistance.

Can a power surge cause my Vizio TV to not turn on?

Yes, a power surge can damage the power supply or other components of your Vizio TV, causing it to not turn on.

How can I prevent my Vizio TV from being damaged by a power surge?

To protect your Vizio TV from power surges, you can use a surge protector. Plug your TV into a surge protector and then plug the surge protector into a wall outlet.

How can I update the software on my Vizio TV?

To update the software on your Vizio TV, go to the TV’s settings menu, select “System,” and then select “Check for updates.”


If your Vizio TV won’t turn on, it can be frustrating. However, there are several steps you can take to troubleshoot the issue, such as checking the power source and trying a power cycle. If these steps don’t work, contact Vizio customer support or professional repair service for further assistance.

Protect your TV from power surges by using a surge protector, and keep your software up to date to prevent any potential issues. Remember, attempting to repair your TV yourself can be dangerous and may cause further damage, so it’s best to seek professional help.

Also, read

Leave a Reply

Your email address will not be published. Required fields are marked *