4 Digit Universal Remote Control Codes for TV

You can operate various TV models with the help of a Universal remote by making use of universal remote codes list. To help you find the four digit codes for universal remote associated with your particular brand, we have listed remote control codes for all TV brands. Look at the below list for all TV brands and choose the code associated with your specific brand. With the help of these remote codes, you can effectively do the programming of your universal remote. After it, you can enjoy all the operations of your TV such as turning off/on TV, volume down/up with the help of Universal remote. However, 4 digit universal remote codes list has been mentioned below for all TVs and other devices. 

4 Digit Universal Remote Codes List

Below is the 4 digit Universal TV remote codes list for all brands of TVs:

A:

B :

C :

D:

E :

F:

G:

H :

I :

J :

K :

L :

M :

N :

O :

P :

Q :

R :

S :

T :

U :

V:

W :

Y :

Z :

Programming Universal TV remote control:

To program the universal TV remote control to operate by TV remote codes, use any one of the mentioned methods as per the requirement.

Method 1:  Manual method of programming

It is one of the obvious methods of programming the universal TV remote codes. If you possess the programming manual or familiar with the remote instructions, this method is one of the quick ways of programming the TV and executing all the steps. In programming instructions, all the remote codes are revealed for variant brands—for example, Magnavox, Sony, RCA, Apex DVD players, Vizio TVs, Panasonic. You have to follow the instructions of code entering, and the remote ought to be ready in no time.

The instructions would provide a TV remote codes list and help you in programming the universal remote with no need of them. If your remote does not contain the code search button, the programming process would be different. Follow the below steps:

1. Turn on the television that you wish to operate with universal TV remote codes
2. Now, click on the “TV” button of the universal remote and hold it. The remote light would blink once and would remain in a consistent state.
3. While keeping a hold over the “device” button, click on the universal remote’s “power” key and hold it until the light started blinking for few seconds.
4. Now, let out the  “power”  & “TV” button. If you see that light of the power button is on, that will show that the device has an established pair. In case if not, then try again step 2 and 3.
5. Click on the “Power” button of the universal remote for scanning through the present universal television remote codes. When the TV switches off, it means you have got the right code for a universal remote. But, If the indicator of the remote starts blinking several times, it means the code that you have chosen is incorrect.
6. Now, click on the “Stop” button of the universal remote for saving the universal TV remote code.
7. Now, make use of various functions of the TV remote for testing that everything is working correctly.
8. If you don’t possess the manual’s physical copy, you could search it online for free. Look for the remote control’s manufacturer and have a look at the manual’s digital version. You have an option of bookmarking it for printing it or for further references.

Method 2: Using the Internet for Finding the Code

The device code finder would be available to you if you wish to search the RCA universal remote codes list 4 digits on the appliance you wish to control. Variant brand remote code could be explored over the internet for searching the code list and the associated manuals. Various firms are providing multi remote code lists, but others reveal codes associated with a specific model. You can try code numerous times. Once you obtained the possible remote code lists, you can manually put them as per the given online instructions. Additionally, after putting the code manually, the instructions would reveal how to do programming of remote without making use of universal remote codes. You might obtain the online version of the original manual, but there is often diversity and the latest instructions available on the internet.

Method 3: Checking the Remote

The owner company of the remote is familiar with problems that the remote holders can face, such as Individuals could easily lose the list of instructions or throw away the original manual thinking that they don’t require them anymore. To replace the batteries in a remote would code resetting to default unless you use the “one-battery-in/ one-battery-out” procedure or fingers efficiently. On the back, many remotes contain quick-reference instructions.

Method 4- Using Auto Code Search

For programming the universal remote by Auto code search method, make use of the below steps:

1. First of all, switch on the component you wish to operate by TV codes for a universal remote.
2. On the remote control, click on the button “code search. “If you see the light indicating in it, let out the button of “Code search.”
3. Click on the component button and let out this button associated with the component you wish to operate with remote control.
4. The indicator light would flash once and would light continuously.
5. Make a proper positioning of the remote control in front of the TV and click on the “On/off” button and let out the button.
6. Let the remote control be placed at the device through the whole process.
7. Instantly, when the device power off, click on the “Enter” button and release it.
8. If you fail to click on the “Enter” button within a few seconds, the remote control would send the upcoming code in the TV remote codes list. Then, you have to repeat the steps from the 2^nd step.
9. Make use of code Retrieval for code identification for TV for future purposes.

Alternative Methods

Suppose you make use of more costly universal remotes. In that case, they might reveal additional methods of programming, for example: Making use of The PC by a USB connection or with audio waves. Some TV remotes have an edge feature of auto-learning technology. You will see the programming and features details in the manual.

The proper procedure for Setting up a Universal Remote

The instructions associated with a particular method of  programming the universal TV remote codes are  revealed above in the methods, but the most common methods of programming the remotes are revealed below:

Common methods:

1. Press the “Device” key for only 2-3 seconds and put the first remote control code listed.
2. Click on the “Power” button and hold it until the light of the LED flash. Then, click on the “Device” key in the follow up of the prior code.
3. Keep holding the “device” button until the LED would flash several times and let out the button, followed by putting the first code.
4. Click on the “device” and “power” keys simultaneously and hold them until the LED light flashes or initiates lighting. Afterward, let out both buttons. Constantly click on the power button until the device switches off and on. Then click on the “Device” key for saving the settings.
5. Click on the device button and hold it until the LED light on, let out the button and click on the volume up or channel up until the appliance turns off or on. Click on the stop or device for saving the settings.

Conclusion:

No matter what remote or TV brand you are making use of, if you cannot search out a perfect solution, you should try these methods or options discussed above. If one four digits universal remote code is not working from the list, then choose another code from the same list and try it. If still, you don’t find the solution, you should also take the help of a manual. Moreover, you can use tv remote codes list mentioned above to program any of your devices.

The post 4 Digit Universal Remote Control Codes for All TVs appeared first on My Universal Remote Tips And Codes.

WD TV Media Player Remote Codes and Key Mapping

If you want to know how to program your Western Digital (WD) Media Player with your favourite universal remote, then you have landed in the right place. Whether you have lost your remote or want a better replacement remote, here is a list of remote controls that will program your WD TV Media Player. You will also find a list of remote codes that will work with WD TV Live Media Player.

WD TV Media Player Remote Codes

2558 is the replacement universal remote code to control the WD TV Media player using your universal remote. You may need top-quality universal remotes to map certain keys if the above code doesn’t work. This article will get to know everything you need about WD TV media player remote codes and key mapping.

These replacement universal remote controls are friendly with Western (WD) Digital HD Media Player.

1. Firstly, One For All Essence 2 URC7120
2. Secondly, One For All Essence 3 URC7130
3. Thirdly, One For All Essence 4 URC7140
4. Fourthly, One For All Kameleon 5 URC-8305
5. Then, One For All kameleon 8 URC-8308
6. In addition, One For All XSight Colour URC8602
7. One For All Kameleon 6 URC-8206
8. One For All Kameleon 10 URC-8210

You must use the 2558 setup code to set video accessories 

This guide will make it easy for you to set up and use your remote. It contains in-depth information to help you get the most out of your remote, including every necessary information you need to know.

You may need to map some buttons on the remote to get all the buttons right with the “One For All” type or any other universal remote controls

Here’s how to map keys on the “One For All” remote control:

1 – Set the remote with the correct mode (SAT)

2 – Hold the “magic” button and wait till the LED lights up two times

3 – Press the numbers 9-9-4 from the remote.

4 – Press the “magic” button again but do not hold it this time.

5 – Enter the 5-digit Key Magic code.

6 – Lastly, Press the key to map it to the function.

How to Reset key to its default function “One For All” remote:

1 – Hold the “magic” button and wait till LED lights up two times

2 – Press the numbers 9-9-4 from the remote.

3 – Press a key twice, and the key will reset to its default function.

Here’s a list of magic key codes and WD TV key codes

The magic remote key codes for One For All remotes

One For All URC-7120 WD TV Remote key codes

Conclusion:

This article will surely help you set up Universal remote control regardless of your product type; you just need to keep checking the codes until your device is configured with your favourite remote control.

Read More:

The post WD TV Media Player Remote Control Codes appeared first on My Universal Remote Tips And Codes.