Blackweb ranks as one of the good ones out there. With a Blackweb universal remote, you no longer need to swap between multiple remotes. You can use the remote to program multiple devices. Before you can use your Blackweb remote to program any entertainment device, you need to sync the remote to the device.

 

 

You may think its stressful programming all your devices to a remote. It’s something you get to do just once. After which you can continue to use it for the device. Thankfully, the process of connecting your Blackweb universal remote to any device is quite a straight-forward process. You can get it done in minutes as long as you follow through with the instructions on this post.

There are two ways to program a Blackweb universal remote. You can use the code search method or use the code entry code. Whichever method you choose to use, you will still get the same result as long as you follow through with the process.

How to program a Blackweb Universal Remote With Code Search

You will need the correct Blackweb universal remote code for your device to follow through with this step. You can find the required code from this post

Step 1. Ensure you turn on the device you want to sync with your remote control.

Step 2. Hold your Blackweb universal remote close enough to face the device.

Step 3. Find the component button that matches the device you want sync. Press TV for your Television, Sat/CBl for Cable and satellite, B-Ray/DVD for your DVD or Blu Ray player.

Step 4. Go through this post and get the correct code for your device. Enter the correct code for your device. If you get the correct code, the tiny LED light on your remote will turn off.  

Step 5. Hold the remote to face your device and press any button to test it. For instance, you can press the volume button. If it works, it means you have successfully synced your remote to your device.

How to program a Blackweb Universal Remote with Auto Code search

This is the best way to program your Blackweb remote if you don’t have the codes needed for the first method.

Step 1. Ensure you turn on the device you want to sync with your remote control.

Step 2. Hold your Blackweb universal remote close enough to face the device.

Step 3. Find the component button that matches the device you want sync. Press TV for your Television, Sat/CBl for Cable and satellite, B-Ray/DVD for your DVD or Blu Ray player.

Step 4. Press and hold the ‘OK’ button on your remote. You may have to press this button several to enable your remote locate the correct code. Once you get the right code, your device will turn off automatically. Press the ‘Ok’ again to save the code.

Step 5. Press the power button to turn on your device. Viola, your remote is synced with your device now.

Blackweb Universal Remote Not Working

If your Blackweb universal remote control is not working, it could be as a result of some minor issues. This session will point out issues that can make your universal remote to stop working and to fix it.

Correct Code: Another reason your universal remote control may fail to work is if you are using the wrong code. Thankfully, this post has listed codes for all devices for your Blackweb remote. For most device, we listed more than one codes. If a code doesn’t work, simply copy the next code and try again.

Battery: If there is no battery in your universal remote or the battery is bad, it will not work. Check the battery box of your remote to ensure there the batteries are correctly fixed. Also, ensure that the batteries are not wet, because that is a sign of damage.

Object: If there is an object obstructing your TV or device you want to program, your universal remote may not function well. Ensure you remove all objects and hold your remote close to the device you wish to program.

How do you find the code for your TV?

You will notice we talked about codes a lot in this post. There are two ways to find the correct codes to program your Blackweb Universal Remote. First is on the remote manual, while secondly is on this link.