On a Saturday night, you’re watching your favorite show. On the sofa, you’re enjoying your pizza that you just ordered. Hisense roku tv won’t turn on. Your excitement and relaxation turn into frustration and despair as you start to panic.
Don’t worry, in this article, you will discover all the possible fixes for a hisense roku tv not turning on. Then read on if you have encountered this problem.
Why is my Hisense TV not turning on?
Your Hisense TV may not turn on for several reasons, including:
There is no power when the power cord is plugged in.
It won’t turn on if there is no power connected to the TV.
A fuse has blown.
A blown fuse can stop electricity flowing if it is in your wiring or TV.
There is no power.
Similar effects will also be experienced by the TV in the event of a power outage. No electricity will be received, so it won’t work.
There are no batteries in the remote control.
TV signals will not reach the TV if the remote’s batteries have died and you are using a remote to turn it on.
Hardware and software problems.
The current flow may be disrupted by some hardware or software issues. Also, electrical signals can be disrupted by them.
also, read Hisense Roku TV No Sound Issue
Why Won’t My Hisense Roku TV Turn On But Red Light is On?
If your Hisense TV is on a steady red light, it’s either just in standby mode or plugged in and ready to go.
Blinking red lights could now indicate a power supply issue if it still won’t turn on. By unplugging and plugging your TV back in again, you can power cycle it. You should also make sure that your power cable and electrical outlet are functioning correctly.
Is There a Reset Button on my Hisense Roku TV?
Reset buttons are found on most Hisense TVs, and can be pressed easily.
There are a few alternatives to resetting a model without a reset button. Start by pressing and holding the power button for one minute, then plugging and unplugging the TV. Also, while still holding the first two buttons, press the “power” button while pressing the “volume up” and “menu” buttons simultaneously.
1. Reset the TV
When you cannot turn on your Hisense TV, check to see if the power cord is properly seated in the back, and then try using a different wall outlet. Attempt to turn on the TV by unplugging it from the wall, waiting 60 seconds, and connecting it afterwards.
Also, read How To Reset Hisense Roku TV?
2. Make sure your TV is on
You might have a problem with the wall plug on your Hisense TV, but your TV is fine. This will result in the TV not turning on due to a lack of power.
There may be occasional unannounced starts and stops. In addition, a faulty outlet connection can cause it to do this repeatedly.
Using the following guidelines, you can determine if the main issue is with your wall outlet:
- Make sure the wall outlet is disconnected from the television.
- Ensure that all other devices, including those requiring a higher voltage, are functioning.
- If your TV won’t work in one outlet, try another.
- Connect a device to the wall that you know works properly and remove all power surge suppressors and extensions.
- The Hisense TV should be able to be connected to the wall once more.
- Check whether the power light is lit up by turning on the button underneath the TV.
3. Check that your power cable is working properly
There is a possibility that the TV will not receive enough power or won’t receive any power when its power cord is faulty. It may or may not illuminate depending on how much current is received.
Check the power cord for damage by performing the following steps:
- Look for any broken, uninsulated, or short-circuited wires in the cable.
- Ask a friend or a repairman if they have a power cord that will work with your Hisense TV.
- You can check if the red power light appears.
- A TV firmware or motherboard issue may be to blame if this step fails.
4. Check the input source
Some Hisense TVs go into standby mode when there is no input source. It is possible that your TV may automatically go into standby mode if you connect a streaming device or a set-top box to it. Sometimes there is no picture on the TV, but the sound may be working properly.
Here’s how to deal with it:
- See if the TV briefly lights up before going dark when you turn it on and off.
- If another TV input port is not working, check the others.
- By using the same cable, you can connect other devices, like your decoder, streaming box, or smartphone.
- Change the cable you’re using, such as HDMI, VGA, or RCA.
5. Check your TV’s settings
Children can behave strangely when they are exposed to certain changes on television without their knowledge. In this case, if your television blinks repeatedly but isn’t turning on, it may have a configuration problem. Consequently, the device must be reset to factory settings after deleting configuration files. Put these steps into action:
- All devices connected to your television, along with its power cable, should be removed.
- On your television, find the power button. Depending on the model of your TV, the button may be at the bottom or back.
- The TV will become completely powerless after 30 seconds of holding the power button.
- Turn on your television again after waiting about 20-30 minutes.
- The problem should be resolved if you turn on your television.
also, read Hisense Roku TV Troubleshooting Guide
6. Check for hardware issues
It is most common for Hisense TVs to experience LED backlight failures. Despite the fact that your TV’s image does not display, its red power lights and sound function correctly. There is a possibility of LED backlights failing due to a short in the circuitry of the mainboard or power board.
To get started, follow these steps:
- Fire up a flashlight and aim it at the TV.
- You should check to see if any words or images are visible. If you see letters or images on your screen, it is probably due to a broken backlight circuit.
- Reset the brightness settings to default by repeating the above steps and see if the problem persists.
- Repairmen will be able to replace broken LED backlights.
7. Check your internet connection
A red or blue light may flash 2 to 6 times on your Hisense Smart TV, but the display does not come on.
There are several possible causes for this problem, including a bad modem or router connection, power deflection issues, or motherboard issues with your TV.
8. Ensure that your TV is receiving the right power supply
On the front of the TV, check if the power light is on. A TV that receives enough power is indicated by this indicator. Most likely, your remote is having a problem if the power light is on.
Keep the remote and the TV’s receiver as clear as possible of objects that could obstruct the signal. It is also recommended that you remove electronic devices from the vicinity of the television, at least temporarily, so that external interference can be avoided.
The remote needs to be troubleshoot if the problem persists.
9. Put it back to its default settings
Performing a factory reset will fix the issue if it hasn’t been resolved yet. The default settings as well as all installed applications will be removed. Hard-resetting your television is as easy as following these steps:
- Click on “TV RESET” in the small hole.
- Bend a paper clip and insert it into the hole.
- The clip should be pressed into the hole for about 15 seconds.
- Until the TV turns back on, hold the clip in the hole.
10. Contact customer support
A faulty unit is most likely the result of all of the preceding steps failing. To determine whether this is the case, you should contact customer service.
When contacting support, be prepared to provide the following information:
- Identify your Hisense television by its model number.
- There is a serial number on the remote control.
- Date of purchase of the remote control.
Your warranty information can be checked by Hisense so you can receive a free new remote. Contact the Hisense customer service team at 1888.935.8880. Their operating hours are Monday through Friday, 9.00 a.m. to 9.00 p.m. EST. On weekends, please call between 9 a.m. and 6 p.m. EST.
FAQs:
Why won’t my Hisense Roku TV turn on?
There are several possible reasons why your Hisense Roku TV won’t turn on, such as a power issue, a software issue, a hardware issue, or a problem with the remote control.
How do I troubleshoot my Hisense Roku TV?
You can troubleshoot your Hisense Roku TV by checking the power source, ensuring that the remote control has fresh batteries, resetting the TV, or contacting customer support.
How do I reset my Hisense Roku TV?
To reset your Hisense Roku TV, unplug it from the power source, wait for a few minutes, and then plug it back in. Alternatively, you can perform a factory reset by going to Settings > System > Advanced system settings > Factory reset.
What should I do if my Hisense Roku TV still won’t turn on after troubleshooting?
If your Hisense Roku TV still won’t turn on after troubleshooting, you may need to contact customer support for further assistance or consider getting it repaired or replaced.
Conclusion:
In conclusion, a Hisense Roku TV may not turn on due to various issues such as a power problem, a software issue, a hardware issue, or a remote control issue. Troubleshooting steps such as checking the power source, ensuring that the remote control has fresh batteries, and resetting the TV can help resolve the problem. If the issue persists, contacting customer support or getting the TV repaired or replaced may be necessary.
Also, read
- Best Samsung TV Picture Settings
- Philips Roku TV No Sound But Not Muted
- How To Fix Hisense TV Black Screen
- RCA Universal Remote Codes For TV